Categories

Best Monstrum Tactical Scope

Sig Sauer WHISKEY3 4-12X50mm Scope, 1', SFP - Black + Picatinny Scope Rings (BDC-1 Quadplex Reticle)

  • ...(LD) glass provides industry leading optical clarity for any situation. European style eyepiece for a smooth, fast, and precise reticle adjustment. Dependable waterproof (IPX-7 rated for complete immersion up to 1 meter) and fog-proof performance..
  • PRECISION Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! 1 inch in diameter, the rings are built for use with standard 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
  • INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
  • NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..
Check Stock

Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Lockdown Series Picatinny/Weaver Scope Rings | 30 mm Diameter | Black | Medium Profile

  • Sturdy 30 mm diameter scope rings for use with standard 30 mm scope tubes.
  • Base is compatible with all Picatinny and Weaver mounting platforms.
  • Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
  • The rings are available in three heights - low profile (15mm of clearance), medium profile (18mm of clearance), and high profile (22mm of clearance).
  • All Monstrum Tactical Lockdown Series rings and mounts include a lifetime guarantee.
Check Stock

Monstrum Offset Cantilever Dual Ring Scope Mount | 1 inch Diameter | Black

  • Dual ring scope mount for mounting standard 1 inch tube rifle scopes.
  • Mounts to any flat top Picatinny rail equipped rifle.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Lightweight 6061 grade aluminum construction.
  • All Monstrum Tactical optics mounts come with a lifetime guarantee.
Check Stock

Talley Lightweight Alloy X-Bolt 1in Low Hells Canyon Scope Rings (HC930735), Multi

  • Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from the base and can be mounted in either direction dependent on your preferred scope placement and your mounting system..
  • Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases.
  • High profile in height, 0.8 inches from base of mount to bottom of rings.
  • Available in 1 inch diameter and 30 mm diameter sizes.
  • All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee.
Check Stock

Monstrum Rifle Scope Level Bubble | 1 inch Diameter

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Blackbird 1X Prism Scope | Black

  • The Monstrum Blackbird 1x Prism Scope is a prism scope optic with a fixed 1x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Blackbird 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

The Complete Guide to Gunsmithing: Gun Care and Repair

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Marksman 1X Prism Scope | Flat Dark Earth

  • The Monstrum Marksman 1x Prism Scope is a prism scope optic with a true fixed 1x magnification.
  • Offers similar functionality to 1x red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop the same platform as our 3x Marksman prism scope, it comes with an integrated 1.5 inch riser mount for true co-witnessing with your front sight and mounts to any standard picatinny mounting platform.
  • The Marksman 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Monstrum Raven 1.5X Prism Scope | Black

  • The Monstrum Raven 1.5x Prism Scope is a prism scope optic with a fixed 1.5x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produce less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Raven 1.5x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Monstrum Offset Cantilever Picatinny Scope Rings | 1 inch Diameter | Black

  • Distinctive offset reversible design allows for added flexibility for scope placement and optimum eye relief. The rings extend forward 1.5 inch from....
  • Mounts to any standard Picatinny rail mounting platform | Not compatible with Weaver bases.
  • High profile in height, 0.8 inches from base of mount to bottom of rings.
  • Available in 1 inch diameter and 30 mm diameter sizes.
  • All Monstrum Tactical mount and accessory products are covered by a lifetime guarantee.
Check Stock