Best Mooring Cleat
MX Boat Cleat Stainless Steel,4\ 5\ 6\ 8\ Marine Boat Dock Cleat 2PCS (4\ Silver)
- Boat cleat open base 2PCS,come with fasteners.
- Stainless steel boat cleat,316 ss marine-grade,strong and heavy duty.
- Marine boat dock cleat, the horizontal and vertical distance are 1.9" (48.3mm) and 0.87" (22.3mm) from center to center between two holes..
- Widely use- Rope cleat work for dock lines ,mooring,drawer pulls,home decoration and etc ".
- Open base boat cleat 4inch 5inch 6 inch 8inch.
Check StockFerraycle 2 Pieces Boat Cleat Galvanized Iron Dock Cleat Open Base Cleat Boat Mooring Cleat Dock Cleats Boat Mooring Cleats with 4 Pieces Screws for Dock Boat Rowboat Beach Lake Maritime Decor
- ...ase boat cleats are easy to install and use, each cleat is equipped with 2 screws, you just need to align the screw with the hole in the open base boat cleat and put it in, then use a screwdriver to tighten the screw, so that you can install the cleat and use it.
- Appropriate size: the size of the bottom of this boat mooring cleat is 5.25 x 1.35 cm/ 2.07 x 0.53 inch, and the size of the upper part of this boat mooring cleat is 9.9 x 1.25 cm/ 3.9 x 0.49 inch, the diameter of the small hole is 0.38 cm/ 0.15 inch, they are suitable for boats, kayaks, ships, rowboats and etc..
- Wide range of applications: the dock cleats can be installed on the deck of the dock, and then the boats, canoes, rowboats and kayaks can be fixed near the dock by winding ropes around the cleats.
- You can also install this dock cleat on your door to act as a sliding door handle, it is an ideal beach theme decoration.
Check StockTaylor Made Products 99079 BoatGuard Mooring Whip (8 - Foot)
- RELIABLE PROTECTION — Our mooring whips protect your boat against dockside damage. The fiberglass poles use a rocker arm base for premium, positioning your boat safely away from the dock for maximum protection in severe weather conditions.
- UNMATCHED QUALITY— Our boat mooring whips are high-quality from the sturdy fiberglass and each rod incorporates a low friction tip and whip cleat to enable easy retrieval for boarding-boaters rely on these whips to protect their vessels.
- SIZED FOR YOUR BOAT —The premium whips are designed for boats 25’ and under 10,000 lbs. and are ideal for higher wake areas.
- EXPERT DESIGN — Taylor Made Mooring Whips are engineered to perform and protect you boat from severe weather conditions. They provide the safety zone between the dock and your boat for many docking applications.
Check StockMxeol Black Folding Boat Cleats Flip Up Cleat Stainless Steel 4-1/2 inch W/Fasteners (Matte Black Coating, 4 Packs)
- Black Folding cleats boat 4-1/2 inch marine stainless steel with back plate and fasteners. Two color options: Mirror Polished Silver and Matte Black Coating.
- Black flip up cleats dock tie down 4.5 inch can be tied off for mooring, The distance is 2.68" / 68mm from center to center of two holes.
- Boat cleat folding black stainless steel 4-1/2 inch, Aisi 316 stainless steel.
- Stainless steel cleat fold down cleats 4.5 inch flip up cleat marine hardware for boat, dock, and kayak.
- 4 Packs flip up boat cleats black are recessed cleat, raised height: 1-1/2", recessed height: 1/2".
Check StockTaylor Made Products PMW.1800 Premium Boat Mooring Whip (47' to 56' Boats)
- RELIABLE PROTECTION — Our premium mooring whips protect your boat against dockside damage. The fiberglass poles use a rocker arm base for premium, positioning your boat safely away from the dock for maximum protection in severe weather conditions.
- UNMATCHED QUALITY— Our boat mooring whips are high-quality from the sturdy fiberglass and each rod incorporates a low friction tip and whip cleat to enable easy retrieval for boarding-boaters rely on these whips to protect their vessels.
- SIZED FOR YOUR BOAT —The premium whips are designed for boats 33’ to 56’, 20,000 lbs. to 48,000 lbs. and are ideal for areas with high wakes, winds and tides.
- EXPERT DESIGN — Taylor Made Mooring Whips are engineered to perform and protect you boat from severe weather conditions. They are ideal in salt water and large tidal areas giving your vessel the protection it needs.
Check StockTaylor Made Products MW.140 Standard Boat Mooring Whip (24' to 28' Boats/5000-10000 lbs.) , Black
- RELIABLE PROTECTION — Both our standard and premium mooring whips protect your boat against dockside damage. The fiberglass poles use a fixed angle base for standard and a rocker arm base for premium, positioning your boat safely away from the dock.
- UNMATCHED QUALITY— Our boat mooring whips are high-quality from the sturdy fiberglass and each rod incorporates a low friction tip and whip cleat to enable easy retrieval for boarding-boaters rely on these whips to protect their vessels.
- SIZED FOR YOUR BOAT —The standard dock edge mooring whips are designed for boats 20’ to 33’, 2,500 lbs. to 20,000 lbs.
- EXPERT DESIGN — Standard whips are designed for fresh or saltwater and moderate wakes to give your boat the maximum protection it needs to withstand the damage that severe weather brings. The heavy-duty fiberglass poles are top-performers.
- MADE IN THE USA — Our dock heavy-duty mooring whips are made in the USA, by the marine brand trusted by boaters everywhere- Taylor Made. Choose quality and performance from Taylor Made- setting the design standard for more than 100....
Check StockVEITHI 8 inch 316 Stainless Steel Boat Cleat Boat Cleats 8inch Open Base 4Pack ,Boat Dock Cleats Include Stainless Steel Screws
- 316 Stainless Steel Cleats 8 inch- Investment casting 316 stainless steel construction, durable in saltwater environment and good performance,Include 4 boat cleats with 16 stainless steel screws,Rope cleat work for dock lines ,mooring and etc..
- Multi Purpose- These 8 inch stainless steel cleats is high polished surface for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks, jet ski's,etc..
- Dock cleat open base- These stainless boat cleat easy line tie-off for any Boat have four holes for attachment..
- Size&Hardware- 8-inch L x 1-1/2-inch H ,Base measures 2.05-inch x 3/4-inch.
- Mounting holes 2.95-inch center to center, stainless boat cleat with hardware, M6x40mm (1.57in) stainless steel screws, perfect size to fit any use..
- Home Nautical Decor- These cleats for boats make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat towel rack, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check StockBoat Cleat Open Base 6 Inch,Dock Cleat Used for Kayak Black Nylon Marine Mooring Accessories,Pack of 2,Include Installation Screws
- Material:These boat cleats made of durable high impact black nylon,strong corrosion resistance and durable in saltwater circumstance..
- Application:Dock cleats are excellent for kayak, canoe, inflatable boat, dinghy, yacht. mooring deck mount or towel racks..
- Size:nylon boat cleat length:6 Inch(160mm),height:1.18 Inch (30mm),about 1.68 Inch (42mm) center to center measurement of two holes.boat rope cleat can accept up to rope diameter 3/8" will fit through the base.
- Function:Nylon boat cleat helps keep your ropes secure and organized,Good for small uses such as Lightweight boat,basic docking or temporary docking..
- Easy Installation:Nylon boat cleats pack of 2,include installation screws,easy to install..
Check StockVEITHI 6 inch 316 Stainless Steel Boat Cleat, Boat Cleats 6inch Open Base (2 Pack), Boat Dock Cleats Include Stainless Steel Screws
- 316 Stainless Steel Cleats 6 inch- Investment casting 316 stainless steel construction, durable in saltwater environment and good performance,Include 2 boat cleats with 8 stainless steel screws,Rope cleat work for dock lines ,mooring and etc..
- Multi Purpose- These 6 inch stainless steel cleats is high polished surface for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks, jet ski's,etc..
- Dock cleat open base- These Boat dock cleats 6inch easy line tie-off for any Boat have four holes for attachment..
- Size&Hardware- 6-inch L x 1-1/8-inch H ,base measures 1.75-inch x 0.6-inch.
- mounting holes 2.25-inch center to center,stainless boat cleat with hardware, M6x30mm (1.18in) stainless steel screws, perfect size to fit any use..
- Home Nautical Decor- These cleats for boats make your home stand out.
- perfect for maritime, beach, garden, pool, coastal decorations.
- use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check StockVEITHI 6inch 316 Stainless Steel Folding Cleat Boat Dock Flip Up Cleat Rope Cleat w/Fasteners (4 Pack)
- 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 6 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
- 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 6 inch folding products are strict tested to ensure the best quality..
- 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall Length 6",the total Width 2-1/8",raised Height 1-3/4", recessed Height 1/2",Bolt hole spacing 3-3/8" (center to center)..
- 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eli....
Check StockWELLUCK Double-Braided Nylon Boat Dock Lines, 3/8 Inch x 15FT Boat Ropes for Docking, 12Inch Eyelet, 4035lbs Breaking Strength, Marine Mooring Rope Dock Line for Docking Boat Accessories (4 Pack)
- 【Safely Dock Your Boat!】Docking your boat is essential because it can keep your boat in place. WELLUCK marine mooring rope comes with superior Nylon material, which is thicker and stronger to keep your vessel secure in all weathers..
- 【Strong Double-Braided Rope Structure】Quality counts. This docking lines are made of 100% double braided NYLON, which has great strength and shock load resistance. Weathering won’t persist in chafing and fraying the strands..
- 【Marine-Grade Nylon Material】Marine-grade nylon is by far the superior material used for dock lines because it can withstand saltwater, gas, oil, acids, abrasion and resists UV better than all other synthetics..
- 【Large 12’’ Spliced End Loop】This boat rope with spliced ends allows you to easily loop or fasten the cleat. The rope has a non-abrasive finish and it’s pliable so it will follow the direction where it needed to be. Softer and easier to handle, cleat and coil..
- 【High Tensile Strength】The boat lines are double-braided from 24 strands of marine-grade nylon and over 15% stronger than comparable three-strand mooring lines. The safe working load is 820-Pounds and breaking strength is 4035-Pounds..
Check StockAmarine Made Dock Line, Double Braided Nylon Dock Lines 4840 lbs Breaking Strength (L:25 ft. D:1/2 inch Eyelet: 12 inch) 4 Pack of Marine Mooring Rope Boat Dock Lines Working Load Limit:968 lbs
- 【Nylon Material】Our SearQing dock lines are ideal for docking, mooring rope, anchoring, towing, camping, transport, pull cart and more.To tie your boat to any pier, slide, wharf or seawall, the correct rope is only nylon.It is very soft,strong,resilient and can resist the harmful sunlight(dock lines iving in the sun).Nylon does not suddenly tighten, but spreads the load by stretching..
- 【Double Braid】Double braid is ideal for docking, combining decreased stretch with increased shock absorption, perfect for water crafts, small boats, and other water activities.Double braid is stronger than three-strand in durability, stretchability, and shock-absorbency. Double Braided Nylon does not kink or rotate under heavy loads..
- 【Ultra Strength】5/8" x 20' dock line with 15" eyelet. (*Working load limit: 1540 lbs. / Breaking strength: 7700 lbs.) Suitable for Kayak Pontoon Boats up to 40ft.Ultra strong with a higher tensile strength than other dockline materials. It will not wear out your boat during use..
- 【Eye Splice】There is an eye hole on the end which makes a quick task of looping the cleat.the loop is more than long enough to fit any cleat and the ends are wrapped to prevent unwinding.(Professionally whipped at the eyelet throat, and heat-treat....
Check StockVEITHI 316 Stainless Steel Boat Folding Cleats 5 inch Flip up Dock Cleat for Deck and Boat Dock Cleats Folding Cleat Rope Cleat Boat Cleat with Fasteners 4 Pack
- 【High-quality Materials】Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.flip up dock cleats 5 inch maximum corrosion resistance and durability in the saltwater environment, folding boat cleat rope cleat work for dock lines,mooring and etc..
- 【Exquisite Workmanship】Our stainless folding boat cleat is high polished surface, precise, bright and with good flatness.for mirror-like appearance to match marine uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks.all of our boat cleats 5 inch folding products are strict tested to ensure the best quality..
- 【 Flip up dock cleat size】These folding cleats for boats pop up locks down when not needed, and springs up when use it.The stainless boat cleat overall length 5",the total width 1-3/4",raised height 1-1/2", recessed height 3.5/8",Bolt hole spacing 2-3/4" (center to center)..
- 【Collapsible Design】These folding cleats for dock simply fold-down when not in use and flip back up when it comes time to tie off. the fold away feature be a great design, eliminate a tripping hazard. the folding boat cleats stainless steel folded down so swimmer would not be hurt when go ashore and diving off the dock.smooth ed....
Check Stock