Categories

Best Morse Drill Sleeves

Chicago Latrobe 110X High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Morse Taper Shank, 118 Degree Notched Point, 5/8\ Size

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
  • Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
  • #2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit.
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2 2MT

  • Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
  • Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
Check Stock

Qualtech 1-3/4\ 4MT HSS Undersized Shank Taper Shank Drill Bit, DWDTS1-3/4-4MT

  • Pilot point twist drill bit, high speed steel material..
  • High performance twist drill bit with morse taper shank for high precise drilling of larger bore diameter..
  • Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • Self-centering point, do not need assistant center drilling or center punching..
  • For general using drilling in wood, aluminum, malleable iron, plastic etc..
Check Stock

LANTRO JS MT5 to MT2 Morse Taper Drill, Hardness Wear Resistance Taper Drill Sleeve Reducing Adapter for Lathe Milling

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • SPECIFICATIONS: Accuracy: 0.015mm, Hardness: 50 HRC.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • QUALITY INSPECTION: Each product has been strictly tested before leaving the factory, and rejects defective products.
Check Stock

PSI Woodworking Products TM32KL 1/2-Inch Keyless Drill Chuck with #2 Morse Taper Arbor 1/2 2MT Keyless

  • Includes the 1/2" Keyless Drill Chuck and #2 Morse Taper Arbor.
  • This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
  • Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
Check Stock

Quality Tool Steel Drill Chuck Arbor-Drill, Mill, Lathe Accessories- All Shanks,Tapers,Drawbars,thread Tools (MT2 SHANK M10 DRAWBAR- MOUNTING TAPER M14 X1)

  • DRILL CHUCK ARBORS-MADE OF QUALITY TOOL STEEL.
  • MORSE TAPER MT2- MOUNTING THREAD IS M14 X 1 TO MOUNT THE DRILL CHUCK ON IT..
  • * SHANKS ARE HARDENED & PRECISELY GROUND. DRAWBAR M10 X 1.5 TPI.
Check Stock

PSI Woodworking CJAM10C Expanding Jam Chuck Set, 5 Piece

  • Set of two Jacobs drill chucks with keys.
Check Stock

Inner Lens for Clemco Apollo 600 Helmet, 5 Lenses per Pack

  • Ideal to use with PKMSTS2 mandrel saver #2MT.
  • Does not include drill bit, indented shaft end, or knurled nut.
Check Stock

PSI Woodworking PKM-ELC Maxi-Mandrel #1 Morse Taper

  • Includes (5) 7mm bushings, knurled nut, 7mm drill bit.
  • Collet system securing shaft allows for adjusting shaft length.
  • Can be used with PKMSTS1 Live Mandrel Saver #1MT.
Check Stock

Drill Bits & Plowshares: The History of Farmers Royalty Company

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

Drillbit Taylor (Extended Survival Edition)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

Drill Bits (feat. David Slusser)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock