Categories

Best Motherboard Pin

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

COMeap (3-Pack) Motherboard ATX 4 Pin to SATA Hard Drive HDD Power Adapter Cable for Lenovo 12-inch(30cm)

  • 『4P - SATA』4 Pin port plugs into Lenovo motherboard (NOTE: It is standard 4 pin port, not mini 4 pin port.), SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V 4 pin(NOTE: not mini 4 pin. Please refer to the image 3rd for 4 pin port's dimension), Connector B: SATA (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』Compatible with Lenovo motherboard with standard 4 pin port including: Q77 Q75 E450 E350 D510 (NOTE: It only works with standard 4 pin port, not mini 4 pin port.).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 12 inches(30cm), Quantity: 3 pieces, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for Lenovo motherboard with standard 4 pin port as listed. If you use other incompatible brand motherboards or types, it will definitely burn or damage the motherboard or hard driver and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contac....
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

  • HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
  • 2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
  • the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
  • For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
  • this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

OwlTree 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard 10.6 inch

  • Compatible: work with motherboard with ATX 4 pin, 8 pin or 8+4 pin ports.
  • Connector A: EPS 12V 8 Pin CPU Female Connector. Connector B: ATX 12V 8 Pin (4+4 Detachable) Male Connector. Connector C: ATX 12V 4 Pin Male Connector.
  • Length: 10.6inch/27cm, UL1007 18AWG, 34*0.178TS Tinned Copper Wire, Higher Quality than Regular Cable.
  • Solution: The CPU 8 Pin Female to CPU 8 Pin (4+4) +4 Pin Male Cables provide a good solution for the motherboard required 8+4 pin ATX ports,Compatibility: Compatible with all PSUs - ATX, SFX, Fanless PSU.Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket..
  • This cable only works with motherboard, not PCI-Express video cards. Serious damage can be caused if your use it in place of PCI-Express video cards..
  • Package: 2 Pack EPS12V CPU 8 Pin Female to CPU ATX 8 Pin and ATX 4 Pin Male CPU Power Adapter (10.6in).
Check Stock

FBHDZVV 4 Pin PWM Fan Splitter Cable, Black Sleeved Case Fan Braided Adapter Cable 1 to 3 Converter Y Splitter for Computer PC CPU Cooling Fan ATX Case 4-Pin/3-Pin Extension Power Cable 10 Inches

  • The pwm fan splitter cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin male & one 4-pin male connector, 1-to-3 splitter fan power supply extension cables, male to female connector plug..
  • The black sleeved case fan braided adapter cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans, this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • Easily realize 4 pin PWM temperature control fan parallel connection, make full use of the limited number of motherboard 4 pin interface, can be extended to connect three 4 pin /3 pin fans, the fan splitter cable provide additional fan to increase airflow in your computer case..
  • 4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case. support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
Check Stock

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

ZRM&E 24 Pin Multiple Power Supply Splitter 20+4 Pin Dual PSU Cable Mining Adapter ATX Motherboard Adapter Extension Cable 30cm

  • Type: 30cm 18AWG 24 Pin Multiple Dual PSU Power Supply Splitter.
  • Connectors: One end is 24-Pin (20+4)pin male connector, plugs into the ATX power port on the motherboard. The other two ends are 24-Pin female connectors, connect to two PSU..
  • Low Cost: Allows you to connect two PSU to your ATX motherboard (both 24 pin and 20 pin), and save overall hardware costs of big and expensive power supply..
  • More Efficient: Use the power on/off switch on your motherboard to power both power supply units simultaneously to run on a single motherboard..
  • Applications: Great for 6+ GPU mining rigs that need extra power, applied to intense Gaming, BitCoin, Ethereum, Zcash, Litecoin..
Check Stock

CY SATA Hard Disk Drive Raid Adapter with 15 Pin 7 Pin + 15 Pin to SFF-8482 SAS 22 Pin Converter Adapter

  • Can connect SATA hard disk to SATA motherboard..
  • Can connect SAS hard disk to SAS motherboard..
  • Can NOT connect SAS hard disk to SATA motherboard. (unless your motherboard has SAS chipset).
  • Can NOT connect SATA hard disk to SAS motherboard.....
  • Can connect SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller)..
  • 7 Pin SATA ( Serial ATA )Male to 15 Pin Power Male and 22 Pin SAS SFF-8482 Hard Disk Drive Raid Adapter.
Check Stock

COMeap 24 Pin to 8 Pin ATX PSU Power Adapter Cable Compatible with DELL Optiplex 3020 7020 9020 Precision T1700 12-inch(30cm)

  • 『24P - 8P』24 Pin end to plug into the standard 24 pin ATX Power Supply,8 Pin end plug into Dell motherboard.
  • 『Solution』Allowing you to convert standard 24 pin ATX power supply to 8 pin Dell motherboard power supply connector.
  • 『Compatibility』Compatible with Dell Optiplex 3020/3040/3046/5040/7020/7040/7060/9020, H61/H81/Q77/Q87/B75/A75/Q75/Q65, PowerEdge T20/T30/T130 server, Vostro DT 3671, XE2 Desktop, Precision T1700/T3620 and other 2014+ moldes using 8 pin power connector in motherboard.
  • 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length(excluding the connectors):12inches(30cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Note』Not compatible with Dell Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670. This cable was only designed for some types as listed in the 3rd Point. In order to avoid any compatible problems, please carefully check your PC type or contact us if you are not sure about it. If you connect this cable to other incompatible PC or motherboard, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing.
Check Stock

YOUKITTY ATX 4-pin to SATA Hard Drive Power Adapter Cable for motherboards (2 Pieces)

  • Connectors: 1 x 4-pin port, 1 x SATA port..
  • Compatibility: compatible with motherboards with standard 4-pin ports, including. Q77 Q75 E450 E350 D510 (note: only for standard 4-pin ports, not for mini 4-pin ports).
  • Functionality: 4-pin port plugs into the motherboard (Note: This is the standard 4-pin port, not the mini 4-pin port.) SATA port plugs into the hard drive. Parameter Specification: 18AWG.
  • Caution: This cable is designed for motherboards only and has the standard 4-pin port as described above. Please check the device type carefully, misuse can burn or damage the motherboard or hard drive, we will not be responsible for incorrect use or installation, if you are unsure if your motherboard is supported, please contact us..
Check Stock

PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC Cooling Fans, 13 inch Black Braided Nylon Cable

  • Manages Multiple Fans - Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard.
  • Easy Installation - Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive.
  • Flexible Use - The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans.
  • Designed for Performance - The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.
  • Money-back Guarantee - Backed by our manufacturer’s warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund.
Check Stock

COMeap (2-Pack) Motherboard ATX Mini 4 Pin to 2X Right-Angle SATA Hard Drive HDD Power Adapter Cable for Lenovo 18-inch(46cm)

  • 『Mini 4P - 2x Right-Angle SATA』Mini 4 Pin port plugs into Lenovo motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.), Right-angle 15 Pin SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V mini 4 pin (NOTE: not standard 4 pin. Please refer to the image 2nd for mini 4 pin port's dimension), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』ONLY compatible with Lenovo motherboard with mini 4 pin port including: M410 M415 M510 M510S M510A M610 M710 B415 B250, Thinkcentre m720 tower, ThinkSystem ST50 Servers, ThinkCentre M710t.
  • (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.).
  • 『Parameter』Gauge: 18AWG, Length(including connectors): 18 inches(46cm)，Between 2 SATA: 2.36 inches(6cm),Between 2 SATA: 8 inches(20.5cm), Quantity: 2 pieces, Self-adhesive tape*1pcs.
Check Stock