Categories

Best Motion Range Analyzer

RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus - Slim

  • ...trength and the high quality baked varnished paint provides a unique glossy finish. The device is designed and manufactured to last many years of demanding usage in the field, with internal rechargeable Lithium battery for hours of continuous usage..
  • [Advanced features] – Included advanced high-resolution Spectrum Analyzer mode, WiFi Analyzer mode, Tracking SNA. Internal firmware is continuously updated with additional features and functions to improve the device capabilities..
  • [Free Computer software] - When connected to a Windows, Linux or Mac computer the analyzer can display advanced high resolution graphics, including Power Meter and Spectrum Analyzer real time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services..
  • [Tracking mode enabled] – When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas..
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....
Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check Stock

Antenna Analyzer Meter 1-60MHz Shortwave SWR Antenna Analyzer with 1.0 to 9.99 SWR Usable Measurement Range for Ham Radio

  • HIGH QUALITY-- This Antenna Analyzer adopts black case would protect the antenna analyzer from external damage, durable in use..
  • CONVENIENT OPERATION-- 5 operation buttons are easy and convenient to operate. You can selects operation mode, band and extended functions..
  • FEATURE-- The antenna tester is Powered by DC 12 to 14V 500mA external power with 2.1mm power jack(center pin positive), just connect the power and....
  • WIDE MEASUREMENT RANGE-- SWR usable measurement range of this analyzer is 1.0 to 9.99. step size: user configurable increments of 100Hz, 1KHz, 10KHz,....
  • APPLICATION-- Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. It can measure feed-point....
Check Stock

TinySA Spectrum Analyzer,Handheld Tiny Spectrum Analyzer TinySA 2.8inch Touch Screen,Portable Frequency Analyzer 0.1MHz~ 960MHz MF/HF/VHF UHF Input, Signal Generator with Battery

  • 【Input Frequency Range】Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz..
  • 【2-in-1】Built-in calibration signal generator that is used for automatic self test and low input calibration.When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【2.8inch Touching Display Screen】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Display resolution 320*240 pixels.Color display showing 290 scan points covering up to the full low or high frequency range.Scanning speed of over 1000 points/second using largest resolution filters..
  • 【PC Controlled 】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.*Resistive touch contro*Jog switch control*USB serial port control.
  • 【Package List】1x Tiny Spectrum Analyzer.
Check Stock

Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1

  • 003cp003e◙【003cb003eBuilt-in 2-in-1 Calibration Signal Generator003c/b003e】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.003c/p003e.
  • 003cp003e◙【003cb003e Frequency Range003c/b003e】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.003c/p003e.
  • 003cp003e◙【003cb003ePC Control003c/b003e】This spectrum analyzer can be connected to PC through USB and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.003c/p003e.
  • 003cp003e◙【003cb003ePortable Spectrum Analyzer & ESD Protection Function003c/b003e】The latest version 3.1, new ESD protection function, insta....
Check Stock

Logic Analyzer,USB Logic Analyzer Device Set Mini Digital Pocket Size 8 Channel Input Memory 24MHz

  • 【Wide Range of Applications】Logic analyzers are widely used in automotive electronics, communications, power supplies, computers and other industries. They are professionally manufactured and can provide convenient, intuitive and powerful analysis functions.
  • 【8 Inputs】Each channel of the USB logic analyzer is up to 24M times per second, with good performance, and 8 channels of logic inputs, which can monitor 8 different digital signals at the same time.
  • 【Compound Trigger】The logic analyzer supports a variety of trigger methods, including rising edge, falling edge, high-level trigger, and low-level trigger. The above four basic methods are combined into a composite trigger.
  • 【Exquisite Craftsmanship】The logic analyzer is exquisite in workmanship, easy to use, and has a long service life. It is indicated by a logic pen and a small light indicates the CH1 level, which is very intuitive.
  • 【Data Storage Upload】Real-time upload of USB logic analyzer data, the upper computer adopts compressed storage, the maximum acquisition depth is 10T, which far exceeds actual needs, and is reliable in use.
Check Stock

SDRGEEK TinySA Handheld Tiny Spectrum Analyzer 2.8 Inch Touching Display 100KHz-960MHz Screen Spectrum Analyzers Signal Generator with Battery

  • 【With Two Inputs】Spectrum analyzer with two inputs, fine quality MF/HF/VHF input for 0.1MHz-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6KHz and 640KHz..
  • 【MF/HF/VHF Input】Input step attenuator from 0dB to 31dB for the MF/HF/VHF input. Color display showing 290 scan points covering up to the full low or high frequency range..
  • 【Portable and Convenient】Rechargeable battery allowing a minimum of at least 2 hours portable use. Connected to a PC via USB it becomes a PC controlled spectrum analyzer..
  • 【Wide Application】When not used as spectrum analyzer it can be used as signal generator, MF/HF/VHF sinus output between 0.1MHz-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【Package Included】1 * Spectrum Analyzer.
Check Stock

35?4400MHz Portable Spectrum Analyzer,3.5 ”TFT Handheld Frequency Analyzer Amplitude Bandwidth Frequency Signal Generator,Tracking Generator Steps Sweep Signal Generator (PLZ-SA354400A 3.5inch LCD)

  • [ Accurately Track ] This portable spectrum analyzer 35‑4400MHz Equipped with a tracking source TG, the frequency of the signal output by the tracking source can accurately track the tuning frequency of the spectrum analyzer..
  • [Output Range]35MHz‑4.4GHz signal source output range, can display and analyze a simple spectrum.The input dBm scope is -80dBm~0dBm, output dBm is 0dBm..
  • [4 Major Modes ]Four major modes: Network mode, Spectrum mode, Point frequency mode, Sweep mode. After power on, the default mode is Network mode..
  • [3.5 Inch Touch Display ] Touch function, without button operation, you can directly click on the touch screen to operate..
  • [Portable ] Handheld spectrum analyzer Easy to carry and tiny , powered by USB-C cable,it can be easily hand‑held for measurement or carried to various places.Made of aluminum alloy material, wear resistance and can provide long service time..
Check Stock

NanoVNA V2 3G Vector Network Analyzer Metal Shell Touch Screen 2.8 Inch Antenna Analyzer 50KHz~3GHz Shortwave HF VHF UHF Standing Wave Spectrum Analyzer

  • 3G upgrade version: NanoVNA V2 vector network analyzer measuring frequency range is 50KHz~3GHz. The network analyzer is based on the design of OwOComm, adopts a 2.8-inch TFT LCD touch screen display, optimizes the appearance design, battery capacity and internal configuration, and is equipped with high-performance calibration kits and packaging accessories, so as to develop and produce an easier vector network analyzer to carry and use..
  • Large-capacity battery and stylus: The antenna analyzer's 1950mAh large-capacity battery has longer standby time and durability compared to the previous model. Equipped with a resistive screen stylus, which greatly improves the situation of poor touch and inaccurate click on the screen..
  • Metal shell: NanoVNA V2 3GHz is made of high-quality metal materials, which can fully protect the internal precision circuits, practical, easy to operate, and long service life..
  • Easy to carry: Vector network analyzer is equipped with EVA outer packaging, which is easy to carry and store, practical, and has a long service life. If you have any questions, please contact us in time, we are willing to help you solve the problem..
  • Good amplitude and phase stability: 2 customized high-performance SMA RF cables provide good amplitude and phase....
Check Stock

Vibration Meter AR63B Handheld Vibration Sensor Meter High Precision Vibration Meter Tester Gauge, Vibrometer Analyzer

  • HIGH EFFICIENCY: The digital vibration meter uses the high-performance acceleration meter, realize the repetitiveness and accurate measurement. It has the function of testing axle bearing situation.
  • EASY TO USE: Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.
  • MULTI-FUNCTIONAL: The vibration analyzer tester is multi-functional, which includes temperature measurement, auto switch range, back-light, auto power off.
  • IDEAL TOOL: This vibration meter can be used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Which is specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
  • WIDELY APPLICATIONS: The vibration tester is widely used in the lines of power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

American Fristaden Lab Halogen Moisture Analyzer, 0.005g Accuracy, 100g Capacity, 0.02% Moisture Readability, High Efficiency Halogen Lamp Heating, RS232 USB Interface

  • RESULTS YOU CAN TRUST: If you conduct moisture analysis for quality control or for lab work, a small inaccuracy can compromise your product or ruin your experiment. That’s why the Fristaden Lab precision moisture analyzer is accurate to degree of magnitude higher than similar models (0.005g). Every moisture balance we sell is tested for accuracy and precision before sale..
  • MOISTURE CONTENT ACCURATE TO ±0.5%: We know how a 1-3% change in moisture content can make all the difference in your product or sample’s quality. That’s why this moisture analyzer has a moisture accuracy of ±0.5% (sample ≥5g). This is based on a moisture readability of 0.02% and a repeatability of 0.2%. These results are driven by a balance accurate up to 0.005g and a halogen light accurate to ±1˚C..
  • MANY FEATURES, INTUITIVE CONTROLS: The digital moisture analyzer clearly displays results on a 5.5” LCD Touch Screen. You can easily switch between manual, timed and automatic tests. With the automatic test, the measuring device will alert you once the sample has lost its moisture. Heat samples, up to 100g, from 60~160℃. A calibration weight, pan holder, sample remover and 10 sample pans are included. The moisture scale can be set up in under 15 minutes and comes with a ....
Check Stock