Categories

Best Motor Driver Ic

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...ite RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angl....
Check Stock

CT-17 USB Programming Cable for ICOM Radio IC-7000 IC-7800 IC-7300 IC-7100 IC-7200 IC-7610 IC-7700 IC-7810 IC-718 IC-756 IC-746 IC-706 IC-703

  • USB Programming Cable Compatible with Icom Radio CT-17.
  • 3.5 mm audio plug , For 32 and 64 bit Windows and Mac operating systems.
  • Made of high quality material, super stable and efficient..
  • Compatible With Radios:IC-275, IC-375, IC-475, IC-575, IC-703, IC-706, IC-707, IC-718, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746, IC-756, IC-746 Pro IC-761, IC-765, IC-775, IC-781 IC-820, IC-821, IC-910, IC-970 ，IC-7000, IC-7400, IC-7600, IC-7700, IC-7800 IC-R7000, IC-R7100, IC-R8500, IC-R9000 IC-1275 IC-R10, IC-R72, IC-R75, IC-78 IC-756Pro, IC-756ProII, IC-756ProIII.
  • Package included: USB cable with USB driver CD (Not include CPS program software).
Check Stock

Stepper Motor Driver Module PCB Board DRV8825 for 3D Printer RepRap StepStick

  • · Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • · Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor?s rated voltage to achieve higher step rates.
  • · Built-in regulator (no external logic voltage supply needed).
  • · Exposed solderable ground pad below the driver IC on the bottom of the PCB.
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

Acogedor 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V (without touch)

  • ?2.8 inch color screen, support 65K color display, and the display is colorful.
  • ?With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • ?At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • ?This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • ?The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
Check Stock

LCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)

  • With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
  • 2.8 inch color screen, support 65K color display, and the display is colorful.
Check Stock

Basic 16x2 Character LCD - RGB Backlight 5V

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

Aexit 200Pcs 0402 Fixed Resistors 1005 1mm x 0.5mm 4.7K Ohm Surface Mount Chip Resistor Chip Arrays SMD Resistors

  • Each Size(Approx) : 6 x 4 x 1mm /0.24" x 0.16" x 0.04" (L*W*T).
Check Stock

DaFuRui SMD Resistor kit，0603 SMD Resistor Assortment chip Fixed Resistor Kit 1% (1 ohm~10 Mohm) 36 Value 720pcs SMD Resistor kit 0603

  • Size : 9 x 8 x 7mm/0.36" x 0.3" x 0.28" (L*W*H).
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

  • 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

SoarUp 35A 4 in 1 ESC, 48mhz Frequency Throttle Response BLHeli‑32 4 in 1 ESC for FPV Traversing Machine

  • 35A ESC and Advanced SMTs: Integrate 4 high performance 35A ESCs, built in galvanometer, and purchase new advanced SMTs. After such high integration, the volume is only the same as that of the control of the traversing aircraft, so the installation.
  • Hardware PWM and Damped Light Technology: Hardware PWM drive motor, less noise, more throttle response. Damped Light technology, regenerative braking function, make motor deceleration more sensitive and effective, control more accurate.
  • BLHeli‑S Firmware and ESC Setting: Using BLHeli‑S firmware has powerful performance and rich functions.
  • it also supports setting ESC parameters in various ways, or upgrading ESC firmware (such as setting or upgrading ESC via throttle signal line, using ot.
  • Support and Input Output Line: It not only supports ordinary PWM throttle signal mode, oneshot 125, oneshot 42 and multshot ultra high speed throttle signals, but also supports the latest dshot150 / 300 / 600 digital throttle, with strong anti interferenc.
  • Main Control Chip and PCB Production: EMF8BB21F16G main control chip, operating frequency up to 48mhz. For mosfet, three in one IC driver and high quality high frequency ceramic capacitor. In high end PCB production process, pads are metallized to avoid p.
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock