Categories

Best Motor Power Controller

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

JJ Boom 48v/60V 800w 10\ Mini Harley Motor Wheel Vacuum Tyres 10-6-5.5 Wide Tyre Scooter Motor EVO Engine Motor ATV Hub Motor(48v800w)

  • ...otor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【24Mosfet 45A Brushless Motor Controller】- The Motor Kit include 24MOS 45A±1A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【E-scooter Motor Kit List and Useful】- 2000W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle, Dirt bike, Electric Go karts, Bicycle, Quad carOther DIY project and more..
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock

Electric Motor 1600W 48V go kart Electric Motor kit With throttle 33A Speed Controller BLDC ATV Kits Scooter Motorcycle Engine Ebike Conversion Kit Chain T8F

  • ...otor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【15Mosfet 33A Brushless Motor Controller】- The Motor Kit include 15MOS 33A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F 9/11Teeth Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 4.25kg (9.37lb)..
  • 【E-scooter Motor Kit List and Useful】- 1600W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth Plate Ring, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle,Dirt bike, Electric Go karts, Bicycle, Quad car，Other DIY project and more..
Check Stock

DC Motor Speed Controller PWM Speed Controller DC 12V 24V 60V 500W Electric Motor Speed Control Regulator Power Wheels Speed Controller With PWM Signal Generator Driver Module

  • 【High Grade Material】 This PWM Motor Speed Controller is made of premium quality circuit board material, which has a good durability and wear-resistance to ensure a long term service..
  • 【Soft-s【Soft-start protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.tart protection】 The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor..
  • 【Digital Encoder Button】 The digital encoder knob can adjust the motor speed, which is more accurate and consistent to control the engine speed than ordinary potentiometers..
  • 【Features】 The duty cycle maximum and minimum limits can be set, as well as the PWM output frequency..
  • 【Wide Input Voltage Range】 This PWM DC Motor Speed Controller supports a widely input voltage from DC 9V-60V, and it fits to 12V 24V 36V 48V power supply, at the same time the output current is 12A, power 500w, which ensures a widely application. You can use this Adjustable Motor Controller in different occasions upon different purposes..
Check Stock

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
  • ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

  • ...e】 Input supply voltage: DC 10V-55V.
  • Control frequency: 15KHZ.Please connect the DC power supply to use! Do not continue to use excessive load, the continuous current is 40A, and the peak value is 60A..
  • 【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
  • 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

EBIKELING Waterproof Ebike Conversion Kit for Electric Bike 26" Front or Rear Wheel Electric Bicycle Hub Motor Kit, 500W, Rear/LCD/Thumb

  • ... BLDC Scooter Motor: Brushless High Speed Mid Drive Motor, Voltage 72V DC, Rated Power 3000W peak, Current 45A, Rated Speed 4900rpm/min, (Max 5800RPM), T8F 11Teeth Sprocket, Load Weight: About 100-200kg. NOTE: motor speed according to your load-weight and others..
  • BLDC Controller: Voltage 48-72V, Proctect 42 volt, Power 3000 watt, 24 mosfet, Current 50 amp, Phase Degree: 120°, Smart Controller Can Work With Hall Sensor And Without hall, Brushless Motor Speed Controller, E-Brake, 3-Speed (Low Mid High Speed), Reverse Functions, Indicator Light And Power Lock Functions..
  • Handlebar Twist Throttle: Universal Accelerator Handlebar Throttle Twist Grips, 12V-72V Universal, With 3 Speed (High,Mid and Low Speed) And Reverse Functions, Wire Length About 150cm ( 59 inch) , High Quality Rubber And ABS Material..
  • Useful: Suit For Electric Scooter, Mini Electric Motorcycle DIY Engine Kit, Razor Push Scooter, Ebike Bicycle, Go Karts, E-bike, E-Tricycle,Mid Drive Motor Kit, Complete Set, DIY Engine System, Cycling Part and more. Packing List: 1pc Motor, 1pc Controller, 1pair Handlebar, 1pc Foot Pedal Throttle 1pc lock key, 1set T8F ch....
Check Stock

Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers (1PCS)

  • The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances.
  • It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect..
  • The motor speed controller can easily provide a continuous current to your DC motor or other DC load..
  • Universal DC Motor Speed Controller.Control the speed of a DC motor with this controller..
  • Before you attempting to wire the controller, make sure all power is disconnected. Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the "wiring diagram".
  • Turn on the power, and adjust the potentiometer..
Check Stock

Tilta Nucleus-Nano Wireless Lens/Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirrorless, or Cine-Style Lenses on Cage, Gimbal Such As Ronin S

  • The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm..
  • The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately)..
  • The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions..
  • The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same cha....
Check Stock

DORHEA PWM DC Motor Speed Controller DC 10-55V 24V 36V 48V 60A Stepless Motor Speed Controller with Adjustable Potentiometer Forward-Brake-Reverse Switch and LED Digital Display DC Brush Motor

  • Motor speed controller input supply voltage: DC 10V-55V.
  • The motor speed controller is an aluminum case, very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • The pmw dc motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • The stepless motor knob adjusts the motor speed from 0% ~ 100% smoothly with LED display is accurate to show 0 ~ 100% of the motor speed..
  • The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt, the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

Kunray 48V Go Kart Motor Kit 1000W Electric Brushless DC Motor Kits 3500RPM with 30A BLDC Mid Motor Speed Controller Handlebar Twist Grip Throttle (48V1000W Kits with Mounting Bracket)

  • ...gh Torque High speed, BLDC Mid Drive Motor with T8F 11Teeth Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 3.7kg (8.16lb)..
  • 【Brushless Speed Controller】- 12Mosfet 30A BLDC Motor Control, The Motor Kit include BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
  • 【DC MOTOR KITS POSITIVE & NEGATIVE ROTATION】- BLDC Go kart Motor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
  • 【E-scooter Motor Kit Lists & Useful】- 48V 1000W BLDC Motor, Speed Controller, Handlebar Twist Grip Throttle, Foot Throttle, Power lock key, T8F Tooth Plate Ring, T8F Chain, 3 speed Switch, is Good for Electric Scooter, E-bike, Mini Motorcycle,Dirt bike, Electric Go karts, ....
Check Stock