Categories

Best Motor Pulley

TurboSwing TSGIANT Giant TurboSwing Ski Tow Bar Silver

  • Corrosion resistant 316 stainless steel tow bar elevates the tow rope to keep it clear of the wake and prop wash.
  • Pulley system affords smooth, consistent pulls.
  • Universal motor bracket installation - fits virtually any brand of outboard motor.
  • Tow ropes clip quickly and easily to TurboSwing pulley system.
Check Stock

10 Pcs 3 Dimensional Printer Models Pulley POM Plastic Pulley Models V Groove Ball Bearings Pulley Passive Round Wheels Roller Black

  • Plastic pulley bearing is V-slot model passive round pulley for 3 Dimensional printer, 100% brand new and high quality.
  • This V-slot model pulley is 25mm outer diameter, 11mm thickness, 5mm bore.
  • widely used for wheel alignment, wire rail, pulley.
  • This pulley bearing adopt of motor grade bearings, rust resistant, wear resistant, operate smoothly.
  • The outside of the wheel is made of POM material with good physical, mechanical and chemical properties, especially with excellent friction resistance.
  • Totally 10 pcs passive round pulley, ordinary precision, fit for the general usage of low rotation speed and low load, etc.
Check Stock

12001541 Dryer Drum Roller Kit, 306508 Drum Bearing Kit, WP6-3700340 Dryer Idler Pulley & WP33002535 Drum Belt Replacement for Maytag Crosley Dryer. Replace Parts 303373, 306508VP, 33001783, 33002535

  • [Overview] Repair Kit for Maytag Dryer. This Package Suit include: 2 pcs of Dryer Drum Support Roller Kit 12001541, 2 pcs of Drum Bearing Kit 306508, 1 pc of Dryer Idler Pulley WP6-3700340 and 1 pc of Dryer Drum Belt WP33002535..
  • [Drum Roller] Dryer Drum Support Roller 12001541 holds the drum in place while the drum rotates on the support wheels. Replace Part #: 12001541VP, W10116741, 3-3373, 303373, 303373K, Y303373, DE693, K35-248, 400518, AP4008534, PS1570070, EAP1570070, etc..
  • [Drum Bearing] Dryer Drum Bearing Kit/ Drum Glide Kit 306508 helps the drum rotate smoothly and quietly. Includes glide, cork/felt pad, and 2 rivets. Replace Part #: 306508VP, 3-6508, 312941, 3-12941, 1309, AP4037304, PS1804752, EAP1804752, etc..
  • [Idler Pulley] Dryer Idler Pulley WP6-3700340 maintains correct tension on the drive belt to spin the drum. Replace Part #: 33001783, 6-3700340, WP6-3700340VP, 1472812, AP4373393, PS2347262, EAP2347262, etc..
  • [Drive Belt] Drive/Drum Belt WP33002535 attaches to the motor pulley and spins the drum as the motor rotates. Replace Part #: 33001777, 33002535, WP33002535VP, 791135, AP6007983, PS11741110, EAP11741110, etc..
Check Stock

4392067 Dryer Repair Kit Fits for Maytag Whirlpool Kenmore Crosley Dryers with Drum Roller Belt & Pulley Kit Replace Parts Numbers 2015 80047 587637 4392067VP AP3109602 PS373088 EAP373088

  • ✅ [Consist] Dryer repair kit 4392067 includes the parts most frequently replaced due to normal wear and tear. Whirlpool WPW10314173 Drum Roller,....
  • ✅ [Compatibility] The Dryer Repair Kit compatible with Maytag, Whirlpool, Kenmore, Kitchen Aid, Crosley, Amana, Admiral, Inglis, etc..
  • ✅ [WPW10314173 Drum Roller] Drum support roller WPW10314173 holds the drum in place while the drum rotates on the support wheels. Replace Part #:....
  • ✅ [661570V Belt] Dryer drum belt 661570V attaches to the motor pulley and spins the drum as the motor rotates. 93 1/2" long, 1/4" wide, 4 ribs.....
  • ✅ [279640 Pulley] Idler pulley wheel 279640 maintains correct tension on the drive belt to spin the drum. Replace Part #: 279640VP, 697692, 3388672,....
Check Stock

BENCHWHEEL 48/59 Teeth Kit Drive Pulley Wheel Pulley Motor Pulley Belt Kit for DIY Electric Skateboard Longboard 59 Teeth

  • Snap-on drive pulley wheel: No need to screw, just stuck it into your wheel. Super convenient..
  • Compatible with：Wheels with 6 teeth gear core, 83/90/97/100 mm wheels..
  • What’s in the package: 48 teeth wheel pulley（Compatible with 6 teeth gear core）*1, 16 teeth motor pulley*1, 13 mm 225-3M belt*1, M3*3 screw *3....
Check Stock

BENCHWHEEL 48/59 Teeth Kit Drive Pulley Wheel Pulley Motor Pulley Belt Kit for DIY Electric Skateboard Longboard 48 Teeth

  • Snap-on drive pulley wheel: No need to screw, just stuck it into your wheel. Super convenient..
  • Compatible with：Wheels with 6 teeth gear core, 83/90/97/100 mm wheels..
  • What’s in the package: 48 teeth wheel pulley（Compatible with 6 teeth gear core）*1, 16 teeth motor pulley*1, 13 mm 225-3M belt*1, M3*3 screw *3....
Check Stock

3HP 250L/min 115PSI V Type Twin Cylinder Air Compressor Pump Head Single Stage 2200W 1050rpm Universal Air Compressor Head Motor Faster Inflation&Low Noise for Factory Auto Repair Painting

  • ...pport and correction to ensure the smooth operation of the main engine.Special valve steel is used for hair piece, which has good strength and toughness at high temperature.Faster inflation and low noise.Strong cooling blade, good cooling performance..
  • 【Installation notes】1. When placing the pump head, the motor pulley and the belt pulley must be in the same straight line. The more aligned, the less vibration.2.Tighten the screws (including the base and pulley screws).3.After the screws are installed, the belt shall be tightened. If the belt is loose, please move the motor. After the screws are tightened, reinstall the belt..
  • 4.The new machine must be filled with engine oil before starting, and the engine oil shall be added to the center of the red point of the oil mirror.5.The rotation direction of the pump head is clockwise. If it reverses, please adjust it in time.6.Change the oil for the first half month, the second one and a half months, and the next two to three months..
  • 7.Replace the air filter regularly. Under normal conditions, it must be replaced in two to three months, and in case of poor environment, it must be replaced in one month.8.The operation of the machine will produce high temperature, be careful not to burn!【Shipment】We....
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Heavy Duty 4 Ton 8800 lb Snatch Block Recover Winch Pulley Snatch Block for Winches Double Winch Capacity

  • Fits up to 5/16" winch wire rope. No disassembly required: the pulley swivels open to accept line. Fast attachment: 3" holes. Measures: 10-1/4" x 5"..
  • Load tested to 8818 lb (4 Ton), 3/16" thick high tensile strength steel pulley wheel with black powder-coated, smooth pulleys and quiet if pulled on-axis..
  • When you need your winch to perform powerfully, this snatch block is your go-to accessory, allows better angles during difficult pulls. Winch pulley block feature is prevent the cable from bunching up on one side of the drum during angled pulls and can also double your pulling power..
  • Winching with this snatch block pulley can also reduce amp load and prevents winch overheating, increases and preserves winch motor life..
  • Double the pulling capacity of your ATV/UTV/Truck winch. Use for towing, climbing, warehouse, home and industrial uses..
Check Stock

Lifstar 2-1/2-inch Diameter Nylon Pulley, Rope Pulley for Outdoor Clotheslines - Fits 1/4-inch Rope, 4 Pieces

  • 5.95" OUTSIDE DIAMETER , FITS 1-1/8" SHAFT DIAMETER. 1/4 KEYWAY IS STANDARD FOR 1-1/8" SHAFT, 182T & 184T FRAME MOTORS. KEYWAY NOT INCLUDED..
  • THIS CAST IRON DOUBLE GROOVE PULLEY TAKES 2 BELTS AND INCLUDES THE " H " STYLE TAPERED BUSHING..
  • GROOVES WILL FIT THE FOLLOWING V-BELT TYPES ( 3/8" TOP WIDTH 3L / 3LK) (1/2" TOP WIDTH 4L / 4LK / A / AK / AX ).
  • THE TAPERED BUSHING LOCKS ONTO YOUR MOTOR SHAFT AS YOU SCREW DOWN THE LOCK SCREWS, RESULTING IN A SUPER TIGHT INDUSTRIAL TAPERED LOCK..
  • MOTOR PULLEY IS MADE OF CAST IRON, THE H BUSHING IS MADE FROM C45 STEEL WITH BLACK OXIDE FINISH..
Check Stock

Cutex Speed Reducer (2' and 6' Pulley) for Industrial Sewing Machines

  • Speed Reducer For Industrial Sewing Machines..
  • Adds torque and allows you to gear down sewing speed from 1/3 of your machine's rated speed..
  • To be installed under sewing machine table, between machine handwheel and motor pulley..
  • Recommended to use on heavy duty leather or upholstery sewing machines for more torque and better stitch control..
Check Stock

RuiLing 2pcs GT2 Aluminum Alloy Synchronous Wheel 3D Printer Accessories 20 Teeth Bore 5mm Timing Pulley for Width 6mm Open Timing Belt

  • Type: 2pcs GT2 Timing Pulley, Teeth Number: 20 Teeth, Inner Bore Diameter: 5mm, Outer Diameter: 16mm.
  • Made of high quality aluminum alloy, with fine workmanship, smooth surface, rust and corrosion resistant, sturdy and durable to use..
  • Designed specifically for linear motion, round tooth profile guarantees that the belt tooth fits smoothly..
  • Fixed Mode: 2pcs Fastener screws for each pulley, which have already been screwed in the pulley, come with a mini wrench for convenient installation..
  • Application: Perfect choice for 3D printer or similar projects, suitable for 6mm width GT2 timing belt and 5mm shaft stepper motor..
Check Stock