Categories

Best Motor Terminals

Supplying Demand CP230 SPCP230 HVAC Condensate Pump 230V with Audible Alarm

  • This pump is designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
  • Motor Horsepower: 1/10 HP | Voltage:208 / 230 VAC | Watts: 75 W | Amperage: .72 A | Frequency: 50 / 60 Hz | Motor Overload Protector:Yes | Height Total: 7.25" | Length Total: 11.25" | Width Total:5" | Tank Capacity: 1/2 Gal. | Discharge: 3/8" Barb | Maximum Temperature: 110° F | Alarm Sound Level: 80 dB.
  • 22 feet of standard lift @ 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4" quick connect terminals | 3 terminals provided for easy connection.
  • Independent NO audible alarm switch rated @ 80 dB | Specially designed leak-free motor and safety float | 3/8" rubber ball check valve.
  • Vibration absorbing feet | Metal side mount tabs, 11.5" on center | 3 inlet holes | 6 foot power cord included.
Check Stock

Supplying Demand CP115 SPCP115 HVAC/R Condensate Pump with Alarm 1/10HP 115VAC

  • High quality pump designed to remove condensate from AC systems, condensing furnaces and boilers, ice machines, drinking fountains, and coolers. These pumps incorporate an audible alarm, and an overflow switch that can be used to shut down the system..
  • Applications include HVACR, ice machines, drinking fountains, and coolers..
  • 22 feet of standard lift at 10 GPH | Independent NC safety switch & motor switch | Suitable for acidic condensate | 1/4 inch quick-connect terminals | 3 terminals are provided for easy connection | Independent NO audible alarm switch rated at 80 dB.
  • Specially designed leak-free motor and safety float | 3/8 inch rubber ball check valve | Vibration absorbing feet | Metal side mount tabs, 11-1/2 inches on center | 3 inlet holes | 6 foot power cord included.
  • Alarm Sound Level: 80 dB | Maximum Temperature: 110° F | Tank Capacity: 1/2 gallon | Discharge: 3/8 inch | Barb. Frequency: 60 Hz | Motor Overload Protector: Yes | Amperage: 1.45 A | Watts: 80 W | UL Listed: Yes | Motor Horsepower: 1/10 HP | Voltage: 115 VAC | Dimensions: 5 inches wide x 11-1/4 inches long x 7-1/4 inches tall.
Check Stock

weideer 7-80V PWM DC Motor Speed Controller Switch 30A Control 12V 24V 36V 48V With Screwdriver And Terminals K-012

  • Drive current: 30A max,on-board switch with operation Stop brake function；Control power: 12V 300W 24V 400W 48V 450W 72V 500W..
  • 4 high pressure tube drive ,3 high-voltage 100V high-frequency resistance capacitors, and fuses for braking. The parameters are not easy to heat and easy to replace. The standard aluminum housing protects the internal circuits and components for long-term durability..
  • Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range.
  • Easy to install：An extra screwdriver and4Terminals is provided to make your wiring more convenient..
  • Package Contents:1pcs 7-80V PWM DC Motor Speed Controller.
  • Hard carton packaging, no need to worry about the aluminum shell being bent..
Check Stock

ClimaTek Upgraded Replacement for Whirlpool Dryer Timer Control - WPW10436303

  • Twelve (12) Terminals and Two (2) Terminals on the Motor..
  • Replacement for numbers: WPW10436303, W10436303 (162-426-AM). AP6021393 and PS11754717.
Check Stock

DC Motor Controller, Yeeco DC 10-60V 12V 24V 36V 48V 60V DC Motor Speed Controller, PWM Stepless Brushed Motor Control, Variable Speed Control Generator Kit with Control Switch

  • WIDELY OPERATING RANGE:Input:DC 10-60V,max drive current is 6A,Maximum wattage is 300W,PWM pulse width adjustable range: 10%-100%.
  • ADJUSTABLE KNOB:DC brush motor speed driver is designed with a voltage adjustment knob, very convenient for voltage control., DC output stepless adjustable..
  • WIRING TERMINALS DESIGN: The wiring terminals adopts fence type design and is with safety cover, and there is wiring marks on each terminal, please follow the marks when you are wiring..
  • SPECIFICATION:Small Size:0.4×3.9×2.4inch, DC motor speed controller has high precision, wide speed controlling range, low power consumption and long service life.
  • OCCASION:Pwm dc motor speed controller widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
Check Stock

Whirlpool W10436303 Dryer Timer Genuine Original Equipment Manufacturer OEM Part

  • Dryer Timer Control for Whirlpool Amana Admiral WPW10436303 W10436303.
  • Clothes Dryer Timer for Whirlpool part number W10436303 (162-418-AM)..
  • Twelve (12) Terminals and  Two (2) Terminals on the Motor..
  • Replacement for numbers 162-426-1, 162-418-1, WPW10436303, AP6021393 and PS11754717.
  • Designed to fit specific Whirlpool manufactured Dryers models including Admiral, Jenn Air, Kenmore, Magic Chef and Maytag..
Check Stock

MAYITOP 131763202 Washer Door Lock For Frigidaire Kenmore GE With Striker131763310

  • Replacement Washing Machine Door Lock Switch Assembly for Electrolux / Frigidaire part number 131763202..
  • It has 6 terminals on the grey plastic housing and 2 terminals on the wax motor..
  • Replaces numbers 131269400, 131763200, 131763245, 1531974, AH2367737, AP4455026, EA2367737, and PS2367737..
  • This is designed to fit specific Electrolux manufactured Front Load Washing Machine models including Frigidaire, Gibson and Kenmore models..
Check Stock

Leviton 5601-2WM 15 Amp, 120/277 Volt, Decora Rocker Single-Pole AC Quiet Switch, Residential Grade, Grounding, 10-Pack, White

  • Switch Frame shields against dust and prevents rocker binding.
  • Terminal screws accept up to no. 12 agw and quick wire push-in terminals accept no. 14 awg solid Copper wire only.
  • Sturdy construction for long service life.
  • Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating.
  • Switch frame shields against dust and prevents rocker binding^Terminal screws accept up to No. 12 AGW and Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Sturdy construction for long service life^Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating^Complements every décor.
Check Stock

Milling Machine Linear Scale, 170mm High Accuracy Linear Encoder for Milling Lathe Machine

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

HONEYWELL S&C SS41 IC, HALL EFFECT SENSOR, BIPOLAR, TO-92-3 (5 pieces)

  • Model number is 49E, OH49E, S49E, SS49E..
  • 3V to 6.5V operating voltage, used for electric vehicle motor or industrial motor..
  • Operating temperature is -40¡ãC to +100¡ãC, 3 pins terminals length about 15mm/0.59inch..
  • Miniature construction, low noise and stable output..
  • And also the ideal parts for electric bike or scooter brushless motor repair parts..
Check Stock

Morris Products 70303 Toggle Switches 3 Pole On/Off/On 1.09 Width 1.31 Length 0.80 Height

  • Heavy Duty 3 Pole Toggle Switch 3PDT On-Off-On Screw Terminals - Brass and Nickel plated Multi-Pole Toggle Switches are extra durable..
  • Heavy Duty 3 Pole Toggle Switch 3PDT On-Off-On Screw Terminals features include:.
  • Great for power tool and motor control switch applications.
Check Stock

Minn Kota Trolling Motor Power Center

  • This battery box / power center contains easy access external battery terminals that allow trolling motor leads and charger leads to be connected to the battery posts without opening the box.
  • Protects your battery (not included) on a small boat, transom application (boats that do not have battery compartments).
  • Built-in, push button battery meter with 4 LEDs displays current “state of charge”.
  • 60A resettable circuit breaker connected to top.
  • 10A resettable circuit breaker connected to two accessory ports.
  • Ring terminals on inside battery connectors.
  • Compatible with group 24 and 27 size batteries.
  • Overall dimensions: 7" x 13.5" wide x 12" tall.
Check Stock

Dial Manufacturing 3/4 HP 115V 2 Speed Evaporative Cooler Motor

  • Permanently lubricated ball bearings ensure against over-oiling.
  • Motor terminals are easily accessible for connecting the motor cord.
  • Corrosion-resistant steel construction for durability and long life.
  • Automatic thermal overload feature protects against overheating.
Check Stock