Categories

Best Motorcycle Spark Plug Wrench

AUTO-PLAZA 16-18MM (5/8-45/64Inch) Motorcycle Ignition Spark Plug Spanner Deep Reach Socket Wrench Tool Set

  • Spark plug deep reach socket spanner with length 150mm, it can be reach to the awkward plugs.
  • Two sizes on 2 ends: 16mm & 18mm, covering most common plugs.
  • Length of wrench:15CM，Tommy bar length: 13cm, Type:One plug wrench.
  • Widely used in the disassembly of automobile and motorcycle parts.
  • Ergonomic design, high quality, high strength and durability for long service.
Check Stock

Pair of 16-18mm(5/8-45/64'') Double Ended 150mm(5-7/8') Length Motorcycle Ignition Spark Plug Spanner Deep Reach Socket Wrench Tool with TommyBar

  • Spark plug deep reach socket spanner with length 15mm, it can be reach to the awkward plugs.
  • Two sizes on 2 ends: 16mm & 18mm, covering most common plugs.
  • Length of wrench:15CM，Tommy bar length: 13cm, Type:One plug wrench.
  • Widely used in the disassembly of automobile and motorcycle parts.
  • Ergonomic design, high quality, high strength and durability for long service.
Check Stock

Powerbuilt 12mm Back Tap Spark Plug Thread Repair Tool, Straightening Tool, Motorcycle Spark Plugs, Repairs Damaged Threads - 641148

  • Back-taper 12 millimeter thread straightening tool for motorcycle spark plug fouled threads.
  • Collapsible design allows it to engage be placed through the spark plug hole and into the CHAMBER.
  • Expands the tool's threaded area and threading into the clean threads.
  • Back-Tap 12 millimeter thread straightening tool for motorcycle spark plug fouled threads.
  • Collapsible design allows it to engage be placed through the spark plug hole and into the chamber.
  • Backtap repairs the damaged threads as it is drawn up through the spark plug hole.
Check Stock

EWK Mercedes Spark Plug Wrench Boot Puller 17mm for V6 V8 Engine Remove & Install

  • 【 Easy to Use】This wrench allows it to fit into metal spark plug boots easily. To change spark plugs for optimal performance and better fuel economy..
  • 【 Special Angle 】The 17mm spark plug wrench with specially designed angle along its tapered machined surface. To remove the spark plug in hard-to-reach places without damaging the wire..
  • 【 Necessity For Maintenance 】There are 16 spark plugs and wires in different positions and depth in Mercedes Benz engine. Replace spark plugs in scheduled to prevent the engine misfire, rough idling, or increased fuel usage..
  • 【 Applicable 】 Design for Mercedes Benz M110, M112 and M113, V6 and V8 engines. Include: 280, 280C, 280E, 280CE, 280S, 280SE, 280SL, 280SLC, C-class, SLK, CLK, E-class, SL-class, S-class, ML-class, G-class..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

CruzTOOLS SKHD SPEEDKIT Tool Kit for Harley-Davidson Motorcycles black

  • The new SPEEDKIT provides unprecedented capability in an ultra-compact 7" x 2" x 2" pouch.
  • The SKHD was developed to cover the most common needs of all Harley-Davidson models except the V-Rod.
  • Includes wrenches, nut drivers, star bits, hex wrenches, 5-in-1 screwdriver, pliers, 2-in-1 spark plug socket, and a tire pressure gauge.
  • Perfect for stashing in a saddlebag or fork bag.
  • Kit Contents: 14 x 17mm Open End Wrench, 12mm Combination Wrench, 10mm Combination Wrench, 8mm Nut Driver, 5/8″ & 18mm Combo Spark Plug Wrench w/....
Check Stock

CruzTOOLS SKEU SPEEDKIT Tool Kit for European Motorcycles , black

  • The new SPEEDKIT provides unprecedented capability in an ultra-compact 7" x 2" x 2" pouch.
  • They'll fit into most OEM tool cavities, but with more content and technician-grade tools.
  • Included are wrenches, hex keys, a 5/8" x 18 mm spark plug socket, pliers, tire gauge, and more - all housed in a sturdy zip-up pouch.
  • The SKEU packs the same muscle as the SKJAS, but with a slightly different wrench set to match European metric size standards.
  • Kit Contents: 10 x 12mm Open End Wrench, 13 x 15mm Open End Wrench, 8mm Nut Driver, 5/8″ & 18mm Combo Spark Plug Wrench w/ lever, Mini 5-in-1 screwdriver w/ Torx T20,25,27,30 bits, Hex Keys: 3,4,5,6mm, 10-50 psi tire gauge, 5.5″ slip-joint pliers, & Heavy-duty zip-up pouch.
Check Stock

KIMPEX Bolt-on Muffler

  • 【Perfect Performance 】This motorcycle exhaust silencer fits for most motorcycles with 48mm diameter exhaust pipes. This does very well at quieting free flow exhaust, not to affect the performance at all..
  • 【Easy to Install 】The muffler exhaust silencer is equipped with a wrench to match the installation of the outlet 48MM pipe, and the design is perfect without additional adjustments.Motorcycle exhaust silencer can be used to replace the old or damaged muffler, easy to install, just remove the screw and tighten it with our own wrench..
  • 【Excellent Function 】48mm motorcycle muffler DB killer makes the exhaust smoother and improve the power, this detachable DB killer can quell the noise from the motorcycle exhaust, At the same time, it can as an extra decoration of your motorcycle, it can also help your motorcycle get the maximum output, it can work as a spark reducer als detachable DB killer, to get rid of the annoying harsh sound..
  • 【High Quality】This motorcycle exhaust pipe muffler made of high grade stainless steel, excellent quality, corrosion resistance, professional modified exhaust system, high temperature resistance, long life，reduce overall weight for maximum output for maximum performance..
Check Stock

Hyper Tough Ht 51-piece Auto And Motorcycle Tool Kit

  • Hyper Tough Ht 51-piece Auto And Motorcycle Tool Kit SET INCLUDES: 1-6-in.Adjustable Wrench 1-3/8-in. Drive Reversible Ratchet 2-3/8-in.Drive Spark Plug Sockets:5/8-in.&13/16-in. 5-3/8-in.Drive 6-Point SAE Sockets:3/8-in.,7/16-in.,1/2-in.,9/16-in.&11/16-in. 5-3/8-in.Drive 6-Point Metric Sockets:8mm,10mm,12mm,14mm&15mm 1-5-in, Curved Jaw Locking Pliers 1-10-50 PSI Tire Gauge 4-Open-End Wrenches:3/8-in.x7/16-in.,1/2-in.x9/16-in.,10mm x 11mm & 12mm x 14mm 1-Magnetic Screwdriver Handle 20-1-in. S.
Check Stock

Inline Spark Plug Tester with Carb Carburetor Cleaner Kit, Gzingen 2 Packs 6-12V Engine Ignition Test Tool Armature Diagnostic Detector Tool for Automotive Car Lawnmower Vehicles Engines

  • ... is a diagnostic tool for any engine with a spark plug, which can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel delivery system..
  • USE FOR: Essential Troubleshooting for All Internal & External Combustion Engines, cars, trucks, motorcycles, lawnmowers, chainsaws, trimmers, snow-blowers, generators etc. - A must have for any individual, professional mechanic garage and auto shop..
  • HOW TO USE: Simply connect the tester between the spark plug and the plug wire, if spark is being sent, the tester will mirror the spark and light up - Find dirty spark plugs, defective points, bad cables or connections, etc..
  • CARBURETOR CLEANER CLEANING BRUSHES KIT: Made of high density nylon brushes and 304 stainless steel material, it's rust-proof, non-deforming with good elasticity and no hair loss, Spiral bristles, great access to the inner side, making the washing clearly and thoroughly. Perfect for clearing out blockages or obstructions in the narrow passage of auto motorcycle carburetor..
Check Stock

MotorFansClub Accessories Fit For Compatible With Yamaha V star 650 XVS650 Dragstar650 / 400

  • 【Perfect Performance 】This motorcycle exhaust silencer fits for most motorcycles with 48mm diameter exhaust pipes. This does very well at quieting free flow exhaust, not to affect the performance at all..
  • 【Easy to Install 】The muffler exhaust silencer is equipped with a wrench to match the installation of the outlet 48MM pipe, and the design is perfect without additional adjustments.Motorcycle exhaust silencer can be used to replace the old or damaged muffler, easy to install, just remove the screw and tighten it with our own wrench..
  • 【Excellent Function 】48mm motorcycle muffler DB killer makes the exhaust smoother and improve the power, this detachable DB killer can quell the noise from the motorcycle exhaust, At the same time, it can as an extra decoration of your motorcycle, it can also help your motorcycle get the maximum output, it can work as a spark reducer als detachable DB killer, to get rid of the annoying harsh sound..
  • 【High Quality】This motorcycle exhaust pipe muffler made of high grade stainless steel, excellent quality, corrosion resistance, professional modified exhaust system, high temperature resistance, long life，reduce overall weight for maximum output for maximum performance..
Check Stock

XtremeAmazing Motorcycle Repair Tool Kit Wrench Spark Plug Socket Spanner Screwdriver Pliers Set Set of 7

  • Made of high quality metal material, high hardness, compact and durable.
  • Easy to carry and store, with storage pocket, light and portable, do not take up space..
  • Package Contents: 1 x Double Ended Screw Drive Double Ended Spanner 8mm & 10mm.
  • 1 x Double Ended Spark Plug Socket 18mm & 16mm (Length 108mm).
Check Stock

Spurtar 14mm Spark Plug Socket 3/8-inch Drive Thin Wall Magnetic Spark Plug Socket - 12-Point Design Compatible with BMW Mini Motorcycle, Car, SUV, Mercedes, Nissan, Peugeot

  • Easy Remove Socket Wrench 14mm Socket Spark Plug: Built-in strong magnet grip systems for easy spark plug removal, 3/8-inch drive. 12-Point 14 mm spark plug socket thin wall 1mm thickness. Good to have a 14mm spark plug repair kit..
  • Fitment: This spark plugs socket magnetic remover fits 2007+ BMW 3.0L turbocharged engines such as the N54, N55, N20, N26, S55, N63, B46, B48, B58, and BMW motorcycles such as the R1200GS. Ideal magnetic socket spark plug tool.
  • 14mm spark plug socket will also be compatible with Mercedes Benz, Nissan, Citroen, Renault 1.2 16v - Peugeot 207 / 307 engines such as the N43, N52, N54, N55, 335, 535, along with lawn mowers and ATVs and many more.
  • *Please check with your engine code or user manual for fitment information.
  • Build to Last: Spurtar 14mm thin wall socket is made with durable, heat-treated chrome vanadium steel (CR-V), ensuring you higher resistance to deformation and long-lasting durability..
  • Buy with confidence: If you have any problem with Spurtar 14mm Magnetic Spark Plug Socket, please email us directly, we promise will provide the best solution....
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...um steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of in....
Check Stock