Categories

Best Motors pumps

SAILINGFLO Shower Sump Pump System Boat Marine RV Drain Kit 12v 750GPH Multi-Port Inlet

  • All-in-one pump & switch – No float switch required.Pump turns on when water level rises & shuts off when water is removed..
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • High quality, 100% marine grade UV stabilised white ABS plastic construction..
  • Output: 750 gallons/hour, Max. recommended discharge head 3.0m. Designed to pump shower/sink water overboard or into a holding tank..
  • Clear snap-on cover for easy access and cleaning, with gasket seal..
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

creatorele Submersible Marine Auto Boat Bilge Pump 1100GPH Electric Boat Plumbing Automatic 12V

  • Connections: For 19mm (3/4") bore hose for 600GPH &750GPH, 29mm hore hose for 1100GPH. Output: Up to 1100 gallons/hour. Max. recommended discharge head 2.5m..
  • All-in-one pump & switch - No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning..
  • Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • Totally submersible and ignition protected.Compact pump for smaller vessels. Tough plastic body.Limited one year warranty..
  • Can be used with switch panel for manual override.Includes comprehensive user manual with installation instructions and wiring diagram..
Check Stock

Dilwe RC Boats 370 Water Cooling Pump with Motor Waterproof JR Plug Pump for RC Aircraft Carriers, Warships, Battleships

  • Waterproof DesignThe RC water pump is waterproof and works well in water, JR plug suitable for plug into the receiver, plug and play..
  • Long Working TimeUnder the condition of 5V voltage, the pump works continuously for 15 hours and pumps water continuously..
  • Application forPut it to work normally, the temperature will be hot, but it belongs to the normal range and will not affect the use, suitable for RC aircraft carriers, warships, battleships, etc. on a series of remotecontrolled ships that require water cooling for motors and ESCs..
  • Stable PerformanceThe power supply method is not to take power from the receiver, the battery used is greater than 2S and the voltage is between 728V, which is need to use a stepdown module to make the operation more stable..
  • Special NoteThe RC water pump is suitable for installation on remote control boats that require water cooling with watercooled motors and without waterabsorbing steering gear..
Check Stock

SAILFLO Boat Marine Shower Sump Pump Drain Kit System - 12v - 750 GPH - Multi-Port Inlet

  • All-in-one pump & switch – No float switch required.
  • Pump turns on when water level rises & shuts off when water is removed.
  • Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • Output: 750 gallons/hour, Max. recommended discharge head 3.0m..
Check Stock

Youxmoto Reversing Solenoid Switch/Relay Winch Motor, 12V 6 Terminal Reverse Polarity Solenoid DC Contactor, 24450 214-1211A11 214-1231-A11 2141211A1106 214-1211A11-06

  • 【FITMENT】: Reversing Solenoid Relay Switch For Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors & More!.
  • 【REFERENCE PART NUMBER】: 24450BX, 214-1211A11, 214-1231-A11, 2141211A51, 2141211A61, 214-1211A11-06..
  • 【Note】: This Reversing solenoid is only for permanent magnet motors, It is used to reverse polarity on Permanent Magnet winch motors with 2 terminal posts. Not suitable for old style motors with copper winding field..
  • 【6 Terminal Continuous】: 4X - 5/16"-24 threaded studs, 2X - 1/4" male blade terminals..
  • 【75 amps for 5 minutes】: Allow 5 minute cool down time after pushing solenoid to the maximum limit. 12 Volt, 150 surge amps..
Check Stock

Veris,Current Switch,Micro,Split-Core,Fixed,NO, H300

  • Hawkeye 300 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern..
  • Applications: Monitoring on/off status of electrical loads. Monitoring direct-drive units, exhaust fans, and other fixed loads. Verifying lighting run time. On/off status for direct-drive fans, pumps, and process motors. More reliable for status than relays across auxiliary contactsIdeal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads. Great for lighting status. Less expensive than 277V relays. Low 0..
  • Ideal for small exhaust fans (not intended to detect belt loss. Removable mounting bracket provides installation flexibility. Monitor status of fans, pumps, motors & other electrical loads. Split-core for fast retrofit installation. Micro housing for tight enclosures..
  • Saves valuable panel space 100% solid-state, no moving parts to fail. Polarity insensitive output 5-year limited warranty..
Check Stock

TE CONNECTIVITY / POTTER & BRUMFIELD T92P7D22-12 POWER RELAY, 12VDC, 30A, DPST-NO, FLANGE

  • Electromagnetic relays are widely used: household air conditioner compressor motors, fan motors, cooling pump motors, starter relays for car starters, spur relays, motors, generator circuit breakers, industrial relays, etc.
  • Product Name: Electromagnetic Power Relay.
  • Red mechanical indicatoe:It can intuitively judge whether the relay is attracted.
  • LED signal lamp : It can judge the AC or DC coil, and judge whether the coil is energized.
Check Stock

Triumilynn 12V 250A Winch Solenoid Relay Contactor Thumb Truck for ATV UTV Boat Vehicle Industry Winch 1500-5000lbs, Replace Warn # 63070 62135 74900 70715 2875714

  • ✔Replace Part Number : 2875714 / 63070 / 62135 / 74900 /70715.
  • ✔Fitment : for winch motors, snow plows and spreader motors, winches, hydraulic pump motors and other reversible motors.
  • ✔Package & Specification : 1 x Warn Winch Solenoid.
  • ✔Feature: The reversing solenoid switch adopts advanced technique and fine workmanship, which having the characteristics of stable characteristics and high reliability.
  • ✔Fast Delivery: Arrival within 2-4 business days, save time for your important task.
Check Stock

Amarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater

  • Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
  • ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
  • ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock

Sandia 66-2300-H Optimizer Portable Extractor, 12 gal, 300 psi Pump, 6.6" Dual 2-Stage VAC Motors with 2000W in-Line Heater, Dual Cord

  • Full 12-gallon recovery and solution tanks. 300 psi pump.
  • 6.6" dual 2-stage VAC motors, 25.2 amps. Non-skid, non-marking 10" wheels for easy stair climbing.
  • Advanced fan and chamber motor design supply a lower amp draw.
  • Made of root-molded Polyethylene for heavy duty applications.
  • Warranty: lifetime on body, 2 years on motors, 2 years on 100 psi pump, 1 year on electrical components.
Check Stock

DB Electrical 430-22046 Pump Motor Compatible with/Replacement for Monarch Leveler, Wheelchair Lift, Eagle Delamerica Thieman

  • Spec: Unit Type: Pump Motor, Voltage: 12, Rotation: CCW, KW: 1.0, Brief: MONARCH EQUIPMENT.
  • Replaces OEM Numbers: ARROWHEAD: 430-22046, DELAMERICA: 16399, EAGLE DC MOTORS: 1330185, J & N: 430-22046, LESTER: 10762, REFERENCE NUMBER: 14785, 17208, 2590100, 2590112, 262174, 50501, 56539, 8110, 82195, 8301, M2590112, M4100, THIEMAN: 4423720, WESTERN MOTORS: W-8031, W-8031-D.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New aftermarket Pump Motor built to meet OEM specifications.
Check Stock

DC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)

  • Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
  • Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
  • comes with start and stop button and can be controlled by external switch.
  • High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
  • Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
  • Widely applications - good to control the output of power, brightness, speed.
  • perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
  • (Note: This product can only be used for DC brushed motors, not for brushless motors).
Check Stock