Categories

Best Mounted Flange Block Bearings

NTN Bearing 30206 Tapered Roller Bearing Cone and Cup Set, Steel, 30 mm Bore, 62 mm OD, 17.25 mm Width

  • 30206 Bearing Size: Out Diameter:62mm/2.44 inch.
  • Ealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Complete single tapered roller bearing assemblies are generally mounted in opposing pairs on a shaft to evenly distribute loads..
  • They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact. These features result in reduced noise and smooth operation..
  • Widely used in transmissions, span styleoil or greased, high radial and axial load, trailer and caravan axles, gearboxes and differentials, span..
Check Stock

Ryobi P241 One+ 18 Volt Lithium Ion 130 Inch Pounds 1,100 RPM 3/8 Inch Right Angle Drill Battery Not Included Power Tool Only

  • The angle extension gears are mounted in a die cast with 3 durable ball bearings. Strong bulid-in magnetic socket holds standard hex drilling and....
  • 105°Angle Extension 1/4inch 6mm Hex Drill Bit Screwdriver Socket Holder Adaptor, 1/4 inch hex drive shaft is quick change compatible and fits most....
  • Right angle driver made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust. durable die cast body with 3 ball bearings for long....
  • 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and....
  • Warranty: We believe in our products there for we offer a 60 day money back guarantee along with a 12 month replacement warranty for this high quality....
Check Stock

Antrader Pillow Block Bearing 10mm Bore Diameter Zinc Alloy Bearing Housing KFL000 Flange Bearing Pack of 4

  • 10mm Bore Diameter self-aligning, pillow block bearing, you can adjust or replace easily..
  • Having a wide inner ring with two set screws for attaching to the shaft..
  • Widely used in various of machinery, especially in food machine..
  • Also can be used into pharmaceutical machinery, conveyering systems, film processing machinery, spin machine, printing machinery,etc..
  • Zinc-aluminum alloy housing, chrome steel insert, easy to install. Pack of 4 Antrader Flange Bearings..
Check Stock

LIMICAR Manual Trolley 1 Ton Heavy Duty 2200LBS Push Beam Trolley Capacity Plain Trolley Crane Lift Dual Wheels Garage Hoist

  • ▲Steel Manual Trolley. Maximum Working Load: 1 Ton (2200LBS)..
  • ▲Push beam trolley adjustable to fit standard or wide flange I-beam track. Dual wheels are designed for a straight or tapered beam track and work on both straight and curved tracks..
  • ▲Multiple spacer washers make beam flange wide adjustments quick and easy. 1 Ton trolley hardened wheels with lubricated for life, double sealed ball bearings. Featuring a durable powder coat finish and pre-lubricated sealed bearings to withstand heavy use..
  • ▲Get strength and rigidity from a lightweight, compact design. Easily adjust trolley to fit a wide variety of beam flange widths. Load equalizing suspension distributes the load to all wheels. Wide standard flange ranges reduce the need for optional extended shaft kits. Match the needs of the job with a variety of trolley hoist suspenders..
  • ▲Push beam trolley is mainly used in the mechanical equipment of infrastructure construction projects such as electric power,automobile manufacturing, construction, highways, bridges, metallurgy, mines, slope tunnels and is an ideal material handling tool for docks, warehouses, garages and other industrial areas..
Check Stock

LIMICAR Manual Trolley 1/2 Ton Heavy Duty 1100LBS Push Beam Trolley Capacity Plain Trolley Crane Lift Dual Wheels Garage Hoist

  • ▲Steel Manual Trolley. Maximum Working Load: 1/2 Ton (1100LBS)..
  • ▲Push beam trolley adjustable to fit standard or wide flange I-beam track. Dual wheels are designed for a straight or tapered beam track and work on both straight and curved tracks..
  • ▲Multiple spacer washers make beam flange wide adjustments quick and easy. I/2 Ton trolley hardened wheels with lubricated for life, double sealed ball bearings. Featuring a durable powder coat finish and pre-lubricated sealed bearings to withstand heavy use..
  • ▲Get strength and rigidity from a lightweight, compact design. Easily adjust trolley to fit a wide variety of beam flange widths. Load equalizing suspension distributes the load to all wheels. Wide standard flange ranges reduce the need for optional extended shaft kits. Match the needs of the job with a variety of trolley hoist suspenders..
  • ▲Push beam trolley is mainly used in the mechanical equipment of infrastructure construction projects such as electric power,automobile manufacturing, construction, highways, bridges, metallurgy, mines, slope tunnels and is an ideal material handling tool for docks, warehouses, garages and other industrial areas..
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

VINAUO 2200LBS Heavy Duty Manual Trolley 1 Ton Capacity Plain Trolley Push Beam Track Roller Trolley Crane Lift Dual Wheels Garage Hoist for Straight Curved I Beam

  • ...l trolley is available in capacities 1 ton(2200LBS). It is designed for horizontally transporting loads by hand, enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment..
  • Built with heavy gauge steel for increased durability, the large steel wheels and thicker bearings provide smooth movement on a variety of beams. The built in bumper guards increase user safety and extend the life of the trolley..
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection. Manual trolleys are best suited for lighter cost effective jobs..
  • Easy to install by sliding it onto the open girder. Meanwhile the load is balanced on four wheels. You mount the trolley simply by pushing it on the open girder without disassembling of the unit. Large adjustment range on many carriers, simply by replacing the spacer discs..
  • This trolley maintains secure contact between wheels and flange surfaces even under highly variable load weights thanks to the carefully designed contours of the steel trolley wheels. Both side plates are pivot mounted so that trolleys can move freely at adequate angles to the flange surface in spite of welded joints that might otherwise cause uneven weight distribution on ....
Check Stock

VINAUO 1100LBS Heavy Duty Manual Trolley 1/2 Ton Capacity Plain Trolley Push Beam Track Roller Trolley Crane Lift Dual Wheels Garage Hoist for Straight Curved I Beam

  • ...trolley is available in capacities 1/2 ton(1100LBS). It is designed for horizontally transporting loads by hand, enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment..
  • Built with heavy gauge steel for increased durability, the large steel wheels and thicker bearings provide smooth movement on a variety of beams. The built in bumper guards increase user safety and extend the life of the trolley..
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection. Manual trolleys are best suited for lighter cost effective jobs..
  • Easy to install by sliding it onto the open girder. Meanwhile the load is balanced on four wheels. You mount the trolley simply by pushing it on the open girder without disassembling of the unit. Large adjustment range on many carriers, simply by replacing the spacer discs..
  • This trolley maintains secure contact between wheels and flange surfaces even under highly variable load weights thanks to the carefully designed contours of the steel trolley wheels. Both side plates are pivot mounted so that trolleys can move freely at adequate angles to the flange surface in spite of welded joints that might otherwise cause uneven weight distribution on ....
Check Stock

Youdert 2\ Grip Ring Caster Swivel Furniture Ball Casters Rolling Vintage Wheel Casters with Sockets Brass Ball Caster Wheels for Desk Wooden Chair Coffee Stand Pack of 4

  • [Set]: Flange mounted ball transfer come with 20 pieces for you to install, make your life convenient, hope you enjoy the fun of DIY..
  • [Purpose]: This roller ball bearing is just what you need for constructing movable surfaces in the home, garage or professional shop..
  • [Premium]: Stainless Steel ball transfer is good material ball wheels, moving quietly and safely..
  • [Practical]: Roller Ball Transfer Bearings is adopts precision production to enhance the stable characteristics and high reliability..
  • [Durable]: Ball Transfer Bearing is made of steel material, ensure long service life and more better using performance..
Check Stock

uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block Flange Bearing, Zinc (Pack of 4)

  • SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Flange.
  • FEATURES:This Bearing is a self-aligning, pillow block bearing.
  • MATERIAL: Zinc Alloy Flanged Base, rust-proof, durable, have long Life.
  • APPLICATION:Pillow Block Bearing Flange Block Bearing is widely used in various of machinery.
  • NOTE:Can be used in transportation, transmission system, feeding systems, processing system, processing machinery.
Check Stock

Birds Choice 1202 Pole Mount Flange, 1 in., Black

  • BIRD FEEDER POLE MOUTING FLANGE: This flange will allow a 1" pole to fit through the center of it to mount a tray feeder somewhere on the middle of the pole, or it can be mounted to the bottom of a feeder and sit on the top of a 1" pole.
  • EASY INSTALL: Allows a 1" pole to fit through the center of it to mount a tray feeder, or it can be mounted to the bottom of a feeder and sit on the top of a 1" pole. Screws included and made of black powder-coated heavy gauge steel for lasting durability.
  • MADE IN THE USA: This product is proudly made in America and manufactured in our Wisconsin facility.
  • BIRDS CHOICE: We currently operate out of a 50,000 square feet manufacturing facility in Chilton, WI, employs 45 awesome team members, and remains committed to designing and creating the best darn products in our niches.
  • PRODUCT SPECIFICATIONS: Includes [1] Pole Mount Flange, [4] screws | Material: Powder coated heavy gauge steel| Measurements: 1 in..
Check Stock

10 PCS Stainless Steel Roller Ball Transfer Bearing, FERCAISH Universal Rotation Ball Casters Round Ball Transfer Units for Transmission Roller Stand Roller Stand

  • Package Content: 8 x Nylon Roller Ball Transfer Bearings Flange Mounted 1/2 Inch + Screws..
  • Dimension: Roller Ball Diameter: 1/2 inch. Total Size: 48*32*20mm/ 1.89*1.26*0.79 inch (L*W*H). Mounting Hole Dia: 4mm/0.157"..
  • Material: Made of high quality carbon steel, good wear resistance, not easy to wear. Each ball transfer bearing with a load capacity of 22 lbs..
  • Application: Only use for bearing side up, not for use as castor wheels. Used in conveyor lines installing, transmission system, processing system, workbench, etc..
  • Quality After Sale Service: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. Free Replacement or Refund within 90 days..
Check Stock

Century 2 HP Pool and Spa Pump Motor, Permanent Split Capacitor, 3450 Nameplate RPM, 230 Voltage, 56Y Frame - B855

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock