Categories

Best Mounted Pcb

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

EPOMAKER Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight, Rotary Knob, Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch (Transparent)

  • 【Gasket-Mounted Structure】Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket and programmable software, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, ....
Check Stock

EPOMAKER Next time Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight Rotary Knob Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch White

  • 【Gasket-Mounted Structure】Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, Otemu, Kailh and other MX ....
Check Stock

ShareGoo S500 Quadcopter Fuselage Frame Kit PCB Version with Carbon Fiber Landing Gear Skide Kits

  • High quality PCB version carbon fiber material and exquisite design:S500 PCB 500mm Upgrade F450 Quadcopter Frame Kit with Landing Gear.
  • Compatible with Gopro Hero 3 2 Axis brushless gimbal for FPV.
  • Fast battery-mounted design. Battery replacement is quick and easy..
  • 6-hole motor installation, compatible with the majority of the motor In the market.
  • Center plate with solder point.Frame only, no electronic parts.Made Carbon Rod inside the arm,to make the arm hard and strong,not shake..
  • Frame only, no electronic parts,Anti-angle arm, increasing the stability of the flight at the same time minimize the power loss..
Check Stock

Mamba 16C2C-16 XLR Combo to 16 XLR Combo - XLR Patch Bay

  • 16 XLR Combo to 16 XLR Combo XLR 1RU Patch Bay.
  • Neutrik Gold Plated connectors. Mounted on PCB and routed for clean audio pass thru.
  • Phantom power OK. 1RU. Solid steel case and sleek finish.
  • Ideal to bring all I/Os that are on back of the rack mounted boxes to front of the rack.
  • Easy patch using XLR-XLR or TRS-TRS patch cables. 5 year warranty.
Check Stock

GE WR49X10283 Series INVERTER WITH JUMPERS KIT

  • Refrigerator compressor mounted controller,(PCB) - WR49X10283.
  • REPLACeS OLD PART NUMBERS: WR55X10490 WR55X10685 WR55X10979 2677747 AH10065259 AH6883663 AP5669522 B01MUF71II EA10065259 EA6883663 EAP10065259 EAP6883663 PS10065259 PS6883663 WR49X10283.
  • This part works with the following brands: G.E., GE, General Electric, Westinghouse, Monogram, Café, Moffat, Profile, Sears, McClary, Hotpoint, & Kenmore..
  • Refrigerator Inverter Board. This inverter board is compressor mounted. The invertor control board manages the functions of the refrigerator, such as cooling..
  • PLEASE NOTE: CONNECTORS FROM OLD UNIT REQUIRED!! THIS UNIT COMES WITHOUT CONNECTORS!.
Check Stock

Galaxy 75 Modular Mechanical Gaming Keyboard - 75% Layout - USB Type C - Full Aluminium Chassis by HK Gaming (Barebone, Black)

  • ✅ The Galaxy 75% features a Low Profile Aluminium Chassis.
  • Hot Swap 5 pins PCB ( Plate & PCB Mounted switches ).
  • ✅ 【RGB Backlit 】: 16.8 Million Color combinations , multiple backlit mode ( Radar, Ripple, Wave, Nebula , Waves, Gradient, Breathing, Star , Laser, Snake and race light mode), no drivers needed. Plug & Play small form factor keyboard.
  • ✅ Supports DURGOD Hera Engine software : ( Upgrade your keyboard firmware on the go and set up complex macros or rebind keys as you wish) and customize lighting effects.
  • ✅ Two Different Cables : Type C To Type C USB Cable-3.3FT (1M) and Type-C to type-A USB cable 5.9FT/ (1.8M).
  • ✅ Compatibility with Mac and Windows: Compatible with Windows 10, Win 8, Win 7, Win Vista, Windows XP and Mac OS (Might need to remap some key through the software).
  • The keyboard is adapted for all environment, Home & Office use..
Check Stock

Gateron KS-9 RGB Mechanical MX Type Key Switch - Clear top (120 Pcs, Green)

  • SMOOTH – Gateron Switches are a favorite among enthusiasts for their smooth and satisfying typing experience as well as their lightning-fast gaming performance. They are available in 10 PCS,  65 PCS, 90 PCS and 120 PCS making them the ideal fit for 60%, TKL and full size keyboards..
  • GATERON GREEN – Clicky switches have a small bump on each keystroke and an audible click sound. The Blue Switches have 4mm of total travel and an actuation force of 60g. The satisfying click sound make these a perfect switch for a typist..
  • TRANSPARENT – The clear design is SMD compatible and lets light shine through the switch making them perfect for RGB LED keyboards..
  • DURABLE – Gateron KS-9 Switches have a lifetime rating of 50 million keystrokes, making them extremely durable and reliable..
  • COMPATIBILITY – The plate-mounted mechanical switches are compatible with Cherry-Style Hotswap Keyboards such as Cherry MX, Kailh, Otemu and other mechanical Gateron Switches. The Gateron Switch is based on a 3 Pin PCB Design which is also compatible with 5 Pin PCB hotswappable Keyboards..
Check Stock

Xtrfy K5 Compact RGB Transparent White, US Layout

  • Super-scan technology for instant response.
Check Stock

Radeon X1550 Pci 256MB VGA Dvi-i Tv Out

  • Dual Link DVI x1 supports up to 2560x1600 resolution.
  • Small Form Factor design PCB - 2.4 x 6.7.
  • Standard ATX (tall) bracket mounted on card.
  • Convertible to Small Form Factor via bracket kit (sold separately).
Check Stock

Gateron KS-9 RGB Mechanical MX Type Key Switch - Clear top (90 Pcs, Brown)

  • SMOOTH – Gateron Switches are a favorite among enthusiasts for their smooth and satisfying typing experience as well as their lightning-fast gaming performance. They are available in 10 PCS,  65 PCS, 90 PCS and 120 PCS making them the ideal fit for 60%, TKL and full size keyboards..
  • GATERON BROWN – Tactile Switches have a small bump on each keystroke with a moderate noise level. The Silent Brown Switches have 4mm of total travel, an actuation force of 55g. The sound level and feeling make these an ideal switch in the office..
  • TRANSPARENT – The clear design is SMD compatible and lets light shine through the switch making them perfect for RGB LED keyboards..
  • DURABLE – Gateron KS-9 Switches have a lifetime rating of 50 million keystrokes, making them extremely durable and reliable..
  • COMPATIBILITY – The plate-mounted mechanical switches are compatible with Cherry-Style Hotswap Keyboards such as Cherry MX, Kailh, Otemu and other mechanical Gateron Switches. The Gateron Switch is based on a 3 Pin PCB Design which is also compatible with 5 Pin PCB hotswappable Keyboards..
Check Stock

Circuit Specialists | Deluxe PCB Preheater and Desoldering System with Hot Air Gun & Soldering Iron - Home & DIY Electronics - Solder Station Tool Kit

  • Introducing the CSI853B+ PCB preheater and hot air rework station, your ultimate solution to soldering and de-soldering surface mount integrated circuits..
  • Featuring a 1000 watt heater, the CSI853B+ integrates a PCB preheating platform with a hot air re-work and soldering system..
  • This easy-to-operate system is powered by 110 VAC +/- 10% and has a maximum power of 1000 watts (preheater and hot air combined)..
  • With a temperature range of 50-400 deg C (122 to 752 deg F) for the preheater and 100-480 deg C for the hot air, the CSI853B+ is designed for stable and consistent working output..
  • The hot air wand, with 720 watts of power and a maximum flow of 120L/minute, can be hand-held or mounted into the moveable stand for freehand work..
Check Stock