Categories

Best Mounting Cylinders

PowerMadd 34452 Black Sentinel Handguard ATV/MX Mount Kit

  • Made of 6061 anodized aluminum for lightweight strength and durability.
  • mounting bracket behind master cylinders and over or under brake and clutch levers.
  • Only 1/2" of space is needed near your handlebar grips.
Check Stock

Thule 91725B Universal Ski & Snowboard Rack Black

  • Includes universal factory mounting hardware.
  • One Key System - Includes two lock cylinders and keys.
  • Safely carries up to 6 pairs of skis or 4 snowboards.
  • Snowboards can be carried base to base for maximum capacity.
  • Fits all Thule, Yakima and most Factory racks.
Check Stock

Three Bond 1184A100G/BC-US Gasket

  • A synthetic rubber, visco-elastic sealer that is semi-drying.
  • Applications include sealing transmission case covers, motorcycle cases, timing chain cases, side covers, 2-piece cylinders, clutch housing bolts and oil filter mounting surfaces.
  • Excellent resistance to water, oil, gasoline and chemicals.
Check Stock

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

24\ Replacement Office Task Chair or Stool Base - Polished Aluminum Top - S4050

  • 24" wide replacement chair or stool base.
  • Standard 2" (50mm) center hole to receive standard chair gas cylinders.
  • Standard 7/16"x7/8" (11mm x 25mm) caster socket holes to receive standard caster mounting stems.
  • Polished aluminum top with un-painted underside.
Check Stock

SUPERLIFT | 92710 | Dual Steering Stabilizer Kit with Bilstein Gas Cylinders fits 1999-2004 Ford F-250 F-350 & Excursion 4WD

  • Fits 1999-2004 Ford F-250, F-350, & Excursion.
  • Helps combat forces that induce tire shimmy such as larger/heavier tires and wheels and slack in your suspension.
  • Includes a pair of Superlift stabilizer cylinders, brackets, and all mounting hardware needed for installation.
  • Works with vehicles with 3" lift kit or higher.
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

Titan Attachments 41" 4-in-1 Combo Mini Skid Steer Bucket with Teeth, 8 CU FT Capacity, Quick Tach Mounting, Grapple, Bulldoze, Back-Fill, Spread, Load, Dig, and Fine Grade

  • Mini Skid Steer Quick Tach Mounting System.
  • Compatible with Toro Dingo, Ditch Witch, Multi One, Ram Rod, Vermeer, Finn Eagle, Boxer, Thomas, and others with Toro style mounting. Will not fit Bobcat, Kanga Kid, or Prodigy..
  • All-in-one attachment for grappling, dozing, back-filling, spreading, and more.
  • Replaceable cast bucket teeth, Front welded-on AR400 cutting edge, Inside back edge replaceable/reversible cutting edge.
  • Twin 3,000 PSI cylinders, Greaseable pins and bushings, and Hoses and flat-faced couplers are included.
Check Stock

Belinlen 10 Pack Plastic Cylinders and Beakers Set, Including 5 Pack Clear Plastic Graduated Cylinders (10, 25, 50, 100, 250ml) and 5 Pack Plastic Beakers Set (50, 100, 250, 500, 1000ml)

  • Package Contains: 16 Pack Cylinders and Beakers Set. (5 sizes clear plastic cylinders, 5 sizes transparent plastic beakers, 5 Transfer Pipettes and 1 Test Tube Brushes)..
  • Size detail: plastic cylinders set- including 10, 25, 50, 100, 250ml, and plastic measuring cups-including 50, 100, 250, 500, 1000ml. Transfer Pipettes: 3ml..
  • Material: made of food grade thickened pp plastic, more resistant to corrosion, non toxic, durable and safe to use..
  • Special design of clear graduated lines on both cylinders and beakers which help you easily measure liquids while transferring them..
  • These cylinders and beakers sets are perfect for homeschool science experiments, students or tearchers doing chemical experiments in the lab, also great for kids Halloween costume. Nice not having glass to worry about breaking..
Check Stock

Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6\ x 10.2\ Mounting Holes - S2979-HD

  • Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern.
  • Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders.
  • Tilt control - push lever in to lock tilt, pull out to unlock.
  • Twist hand wheel to tighten or loosen (adjust) backward tilt tension.
Check Stock