Categories

Best Mounting Plates

Lesnala 4-Piece Bed Railing Bracket Used to Connect Wood, Bed Replacement Parts, Headboard and Footboard Fixing Fittings Wooden Bed Frame Used to Connect Headboards Footboards (Screws Included)

  • Packaged:set of 4.Hook plates with mounting pins. Plates are nickel plated to resist rust and corrosion over time..
  • These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds..
  • This hook plate is intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application..
  • The mounting holes for the pins are 11/32" in diameter. Eight Mounting Pins are included with this item.#10 Wooden Bed Rail Hook Plates,Set of 4,Bed Hooks with pins for Wooden Bed,Wooden Headboard,Footboard Frame,Claw it On intended replacement for Bed Hook #10 Plates,or for new bed constructions.
Check Stock

Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack

  • Adjusts to fit 1/4 Inch to 1 Inch thick wall board, paneling or drywall.
  • mounting brackets offer specially designed screw holes, for a better looking, easy to install job.
  • Adjusts to fit 1/4-Inch to 1-Inch thick wall board, paneling or drywall.
  • Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.
Check Stock

OhLectric Recessed LED Light Plate - Slim Light Kit Bracket - New Construction Light Mounting Plate with Notches - Steel, Pack of 6 (26\ Rough-in Plate for 6\ Recessed LED) - OL-48065

  • RECESSED PLATE SET: Made from top quality galvanised steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want..
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need..
  • MODERN FEATURES: The galvanised steel used in the making of the plates make it lightweight and less likely for rust formation. Use these plates for planning your lighting layout prior to hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted..
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots..
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from resid....
Check Stock

iMBAPrice Low Voltage 1 Gang Mounting Bracket for Banana Wall Plate (5 Pack)

  • 1 Gang Low Voltage Wall Plate, can be installed vertically or horizontally.
  • Horizontal or vertical mounting, installs faster and costs less than metal brackets, UL Listed Designed to mount wall plates flush.
  • Mounting bracket has Oval holes that allow final shifting and straightening.
  • Bracket is its own template for cut-out, trace the bracket then cut the hole.
  • Compatible to most 1-Gang wall plate such as banana wall plates, keystone jack wall plates, HDMI wall plates and more.
Check Stock

OHLECTRIC New Construction Rough-in Plate for Led Downlight - Slim Steel Plate/Bracket - Use As A Guide for Drywaller to Install LED Fixture - Used with 6\ Model - Pack of 48 - OL-31359

  • RECESSED PLATE SET: Made from top-quality galvanized steel material, our led light mounting plate ensures that they are durable through wear and tear. The slots allocated on the plate come with alignment notches in a way to allow easy mounting of the LED light wherever you want.
  • SUITABLE FOR NEW CONSTRUCTION: These plates are the perfect accessory to have whenever you are installing lights in a newly constructed building! The rough-in plate light mount comes in a variety of choices for the recessed holes from 2 inches to 8 inches which you can choose depending on the lighting need.
  • MODERN FEATURES: The galvanized steel used in the making of the plates makes it lightweight and less likely for rust formation. Use these plates for planning your lighting layout before hanging drywall, they will hold the precise spot in the ceiling where the light fixture will be mounted.
  • EASY INSTALLATION: The recessed light plate has mounting holes and tracks that make our mounting plate perfectly fit in different types of structure layouts. Alignment notches on the plate will help align multiple plates. Fix the plates with screws(not included) through the mounting slots.
  • VERSATILE APPLICATIONS: They are ideal for all types of construction projects from residentia....
Check Stock

PAGOW 2Pcs #10 Hook Plates, Universal Bed Rail Hook Plates Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Fonction : #10 wood Bed Rail Hook Plates are intended as a bed replacement parts for hook plates which have been damaged or for new bed construction where bed frame hooks installation is desired..
  • Material : The hook plates are made with 13 Gauge Steel and are the standard configuration for most American-Made beds. Plates are White Zinc plated to resist rust and corrosion over time..
  • Package : Includes 2 pieces of premium #10 heavy duty hook plates & 8 pieces of mounting pins for the 11/32" diameter mounting holes on the hook plates..
  • Dimention : Please refer to our dimention picture for the detailed size data. Measure the distance from the two pins in your headboard/footboard to confirm that hook plate will work in your application..
  • Applications : Suitable for new bed construction that requires hook plates and replacement for damaged hook plates. Wood Bed Rail Hook Plates with pins for Wooden Bed, Wooden Headboard, Footboard Frame..
Check Stock

QLLY 28 inch Adjustable Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (Black)

  • SIZE: Height: 28 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter:2 inches/5cm. Weight: 1.87LB/0.85KG (One Leg)..
  • NOTE: Some threads of the table legs are not perfectly vertical. You need to screw hard so that mounting plates can give the threads some pressure to make them vertical. OR try different table legs and mounting plates combination. If they don't work, please contact us for free replacement..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Desk Legs, 20 x Screws, 4 x Mounting Plates（Wood board not included）. If you find that the product is damaged or missing parts, please contact us for free replacement. (Don't contact Amazon, they will mess things up.).
  • APPLICATION SCENARIO: Great for tables, desks, counter tops, kitchen tables. Easy to install..
Check Stock

PanaVise 110120B 20 lb. Speaker Mount

  • Double knuckle design for twice the adjustability.
  • Two adjusting points offer a full range of motion:210° Tilt, 360° Turn & 360° Rotation.
  • Cast aluminum surface mounting plates include an extra hole for routing speaker wire up to 8mm thick.
  • Plastic coated, steel safety cable and mounting hardware included.
  • Mounting plates are 2.25"x 3.25" (57.1mm x 82.5mm).
Check Stock

2 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes two hook plates and four mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock

POROHOM 4 PCS Universal Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard with Pin Replacement Wooden Bed Parts or New Bed Constructions

  • Function：This hook plate is intended as a replacement for hook plates which have been damaged or for new bed.
  • Versatile：7 Hole Design Ensures Compatibility for ALL Wood Bed Rails，and it is the standard configuration for most American-Made beds..
  • The mounting holes for the pins are 11/32" in diameter，the two pins in your headboard/footboard to confirm that they are 2" apart on center . Tips:Please measure the distance to make sure it can match..
  • Material：Thickening galvanized plates can resist rust and corrosion..
  • Packing included：one item includes 4 hook plates and 8 mounting pins.
  • another one item includes four hook plates and eight mounting pins.
Check Stock

QLLY 8 inch Adjustable Metal Furniture Legs, Replacement Leg for Sofa Couch Chair Ottoman Cabinet, Set of 4 (Black)

  • SIZE: Height: 8 inches/20.3cm (with mounting plate), screw mechanism on the bottom can adjust about 1 inch/2.5cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 0.84LB/0.38KG (One Leg). If the size is inaccurate, please contact us for free replacement..
  • NOTE: Some threads of the table legs are not perfectly vertical. You need to screw hard so that mounting plates can give the threads some pressure to make them vertical. OR try different furniture legs and mounting plates combination. If they don't work, please contact us for free replacement..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Furniture Leg, 20 x Screws, 4 x Mounting Plates. If you find that the product is damaged or missing parts, please contact us for free replacement..
  • APPLICATION SCENARIO: Great for Sofa, Couch, Chair, Ottoman, Furniture, Cabinet, Shelves. Easy to install..
Check Stock

UCTRONICS 19 inch 3U Rack Mount for Raspberry Pi 4, with 8 Mounting Plates, Extendable to Support 12 Units of All Raspberry Pi B/B+ Models

  • This 19 inch rackmount is specifically designed to house 1-8 Units of Raspberry Pi 4 B, can be extended to support 12 units of 4B, 3B+, and other B models, much more than 1U rack. NOTE: It only comes with 8pcs mounting plates, if needed, please order others separately..
  • Standard 3U Size: 19"×5.25"(482.6×133.35mm), fully compatible with 19” server racks, had no issue plugging this into the 3U rack space..
  • Easy to Install: 4 slots on every mounting plate for raspberry pi 4B boards, and 2 mounting holes to the rack on the side, fixed with included screw.
  • the rack can be vertical fixed on the mounting rail (the rack mount screw is not included)..
  • Quality Built: Every piece is made of nice and sturdy gauge of 1.2mm carbon steel, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Package Includes: 1 piece 19" 3U rackmount for Raspberry Pi.
  • 48 screws. NOTE: The blank cover, Micro HDMI adapter, and Pi 4 board are not included.
  • If needed, please search for ASIN B08N66BCXR, B08KXZHD9P, and B08N665CHL to order the blank cover, Micro HDMI adapter and mounting plates separately..
Check Stock

MEICOCO Heavy Duty Wood Bed Rail Hook Plates for Beds Frame Bracket Headboard Footboard Replacement Wooden Bed Parts or New Bed Constructions Set of 4

  • Bed Rail Hook Plates are intended as a replacement for hook plates which have been damaged or for new bed construction where hook plate installation is desired..
  • These hook plates are made with 13 Gauge steel and are the standard configuration for most American-Made beds.hook plates and pins are made of premium steel coated with zinc for rust and corrosion resistance..
  • Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart on center to determine if this hook plate will work in your application..
  • The mounting holes for the pins are 11/32" in diameter. Eight Mounting Pins are included with this item.#10 Wooden Bed Rail Hook Plates,Set of 4,Bed Hooks with pins for Wooden Bed,Wooden Headboard,Footboard Frame,Claw it On intended replacement for Bed Hook #10 Plates,or for new bed constructions.
  • Complete set of 4 pieces of premium heavy duty hook plates with 8 pins..
Check Stock