Categories

Best Movement Parts

StFlyBro 2 Pieces High Torque Silent Clock Movement Mechanism with 5 Pack Clock Hands, DIY Repair Parts Replacement, 1/2 in Total Shaft Length (Black)

  • “CE” & ”RoHS” Approved Clock Movement. The total length of the shaft of our “Push-On” movement is 1/2in, with a thread length of 1/5in that allows a clock face to be 1/8in (3mm) thick.  The clock hands are good for a clock dial diameter more than 2 3/4in (7cm). Recommended clock hand size for the movement is no more than 7 7/8in (20cm)..
  • We provide many parts to easily repair, replace and make a clock.  Our parts are used in craft clocks and frame-less clocks, etc.  Our movement parts are accurate and dependable when in motion, and the second hand spins without any ticking..
  • Five (5) different style & size hands are included with your purchase.  An appropriate style & size set can fit for many clocks.  All sets are good for replacement, repair and making of many clocks..
  • Included:  2 clock movements and 5 sets of clock hands (3 per set) Also included: 2 wall nails, 2 metal hooks, 2 plastic washers, 2 brass washers, 2 brass nuts and 1 instruction sheet. All items are placed firm in a custom foam insert to prevent scratching, bending, and other damage to enclosed items during shipping..
Check Stock

Clock Motor Movement Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (Shaft Length 0.9 Inch/ 23 mm, Black Red)

  • Features: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands, good for repairing, replacing or making a clock by yourself, these replacement parts suit well to different styles of clock frame.
  • Size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches).
  • Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel.
  • Hole center to the tip hand size: the hour hands are approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inches and 82 mm/ 3.2 inches respectively, minute hands are approx. 101 mm/ 3.98 inches, 92 mm/ 3.6 inches and 117 mm/ 4.6 inches, 2 second hands are approx. 100 mm/ 3.9 inches, 1 second caps is approx. 7 mm/ 0.28 inches.
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Check Stock

Paddsun Demagnetizer Watch Repair Screwdriver Tweezers Electrical Demagnetise Degausser Tools US Plug 110V

  • This device can be used for effectively demagnetizing watch movement parts, screws, and tools.Help to remove blockages in quartz watches..
  • Compact and portable. This device can be used for effectively demagnetizing watch movement parts, screws, and tools..
  • Easy to operate, simply place the object on the flux area and hold the red button for 5 seconds. Repeat the process if necessary to achieve the desired result..
  • Plug in the power supply. Put the magnetic watch or parts on the demagnetization area floating around 2 cm above, and the finger holding down the red button, so that items in the degausser on the back and forth around the flip several times, to the various parts of demagnetization, the time is about 5 to 10 seconds. Then release the button, unplug the power is degaussing to complete..
  • 3-7 days arrived destination,Ship from TX,US.1 day handling time during business days..
Check Stock

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft Clock Mechanism with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any....
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total....
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for....
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or....
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to....
Check Stock

RG Evangelion UNIT-01 DX Transport Platform Set

  • A new frontier of the real Grade series begins with the introduction of the multipurpose humanoid decisive weapon, artificial human Evangelion.
  • Rg Evangelion features intricate linked parts construction to represent the relaxation and contraction of muscle fibers resulting in a very close emulation of human-joints.
  • The Movement of the spine and shoulder blades are linked to the Armor parts and follow the movement of the arms and chest.
Check Stock

Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement Wall Clock Mechanism Replacement

  • [Suitable Size]: About 5.6 x 5.6 x 1.6cm/2.2 x 2.2 x 0.6inch.Please confirm the clock mechanism size and shaft length you need before purchasing, thank you for your understanding! ! !.
  • [Quartz Clock Movement]:The Quartz DIY Wall Clock Movement Mechanism has good precision and is equipped with a sweep to provide the watchmaker with accuracy and reliability, and it will provide you with a quiet environment..
  • [Clock Mechanism Replacement]:Wall Clock is made of high-quality aluminum, which is light in weight, corrosion-resistant, and can be used for a long time, providing you with a comfortable and high-quality use experience and decorative effect..
  • [Wall Clock Movement]:Clock movement mechanism parts are suitable for cross stitch, 3D embroidery, craft clocks, frameless wall clocks, etc. Ideal for replacing DIY quartz wall clocks.
  • 【Easy to Install】：the clock movements kits is easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame..
Check Stock

Gatuida 1Pc Clock Mechanism Replacement Quartz DIY Wall Clock Movement Clock Repair Parts Replacement

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment..
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm (0.9 in),thread length 15.4 mm (0.6 in),suitable for 9 - 13 mm thickness clock panel..
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set..
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying..
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..
Check Stock

Bandai Tamashii Nations Metal Build EVA-02 Test Type Spirits Figure

  • A new frontier of the real Grade series begins with the introduction of the multipurpose humanoid decisive weapon, artificial human Evangelion.
  • Rg Evangelion features intricate linked parts construction to represent the relaxation and contraction of muscle fibers resulting in a very close emulation of human-joints.
  • The Movement of the spine and shoulder blades are linked to the Armor parts and follow the movement of the arms and chest.
Check Stock

DEEWISH 14.5mm(0.57 inch) Quartz DIY Wall Clock Movement with 4.7 inches (120 mm) Length Clock Hands and Plastic Hook, Clock Movements Battery Operated DIY Repair Parts Replacement

  • Movement shaft: 14.5 mm(0.57 inch), thread length 6.7 mm(0.26 inch). Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches) Hour hand length: approx. 80 mm (3.15 inches) Minute hand length: approx. 120 mm (4.7 inches) Second hand length: approx. 100 mm (3.9 inches).
  • Jumping clock movement, suitable for 1 - 3 mm(0.04 inch-0.12 inch) thickness clock panel.
  • Long spindle quartz clock replacement movement parts with plastic hook, Good for repairing, replacing, or making a clock. Simple and elegant design, these replacement parts suit well different styles of clock frames..
  • Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements..
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent..
Check Stock

Quartex

  • ♥High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 white),....
  • ♥ Size: total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32....
  • ♥ Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should....
  • ♥ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY....
  • ♥ Package contents: a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come....
Check Stock

2 Pack Non Ticking Wall Miniature Clock Movements Mechanism with 5 Pairs of Short Hands Quartz Motor Kit Battery Operated DIY Repair Parts Replacement, 5/32 in Max Dial Thick, 1/2 in Shaft Length

  • ✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 5 different pairs of hands(4 black and 1 gold), good for repairing, replacing or make your own customized clock project by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well..
  • ✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32 inches) thickness clock panel. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability.
  • equipped with sweeping motion, no ticking.
  • ✔️ Five of most popular miniature clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock creations.
  • get to pick out the style and length of the hands that look best with your clock at no additional charge.The Diameter of Clock Panel should be longer than 2.36in/6cm. The clock hands should be less than 3.74in/9.5cm..
  • ✔️ Compatible clock: applicable to cross-stitch, Five-dimensional embroidery, craft clock, frameless draw clock, and especially suitab....
Check Stock

Silent Quartz DIY Wall Clock Movement Non-Ticking Repair Parts Replacement Kit Including 4 Pairs Hour Hands and Minute Hands 2 Second Hands

  • ⏰Long spindle clock movement: wall clock mechanism replacement movement parts with long shaft.
  • ⏰CLOCK HANDS KIT - Includes 4 pieces of minute hands and 4 pieces of hour hands, 2 second hand and 1 second caps, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • ⏰Clock Movement Wide Application: suit for repair and replacement your clock, pretty good for framless 3D wall clock.
  • ⏰CLOCK MECHANISM SIZE -Total shaft length is 16 mm (0.63 inches), thread length 8mm (0.315 inches), suit for 3 - 6 mm thickness clock panel.
  • ⏰RANGE OF USE - perfect for clock replacement, replacing or making a clock.
  • Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.
Check Stock

Cosiki Shopping Spree Mechanical Watch Movement, Mechanical Watch Part 2813 Watch Movement, Automatic Watch Movement Watch Accessory for Watchmakers DIY Home Use Watch Replacement

  • Professional 2813 watch movement, fine and exquisite workmanship..
  • Wonderful replacement for the old or broken mechanical watch movement..
  • Essential watch parts, easy and convenient for you to replace watch movement..
  • Exquisite workmanship, easy and convenient for installation, reliable in use..
  • Professional watch movement, suitable for professionals and watch repair shop..
Check Stock