Categories

Best Mtb Bar Ends

D Dymoece Mountain Bike Handlebar 31.8 mm MTB Riser Handlebar Aluminium Alloy Bicycle Riser Bars 720mm 780mm

  • Bicycle handlebar bar ends diameter:22.2mm,Clamp diameter:31.8mm(1 1/4''),Handlebar length:720mm.
  • Sand blasted and anodised surface for fatigue resistance and durability.
  • Compatible with most MTB mountain bikes,dirt bicycles,XC downhill and off-road.
Check Stock

Handle Bar Grips for Pro Trick Stunt Scooter BMX/MTB Bike with Handlebar Ends - Soft TPR Grips 150MM Length Non-Slip Comfortable Rubber Hand Grip, 2PCS(White)

  • SOFT TPR MATERIAL - Scooter Grips are made of high-quality soft TPR rubber material, non-slip and shock-absorbing, durable and extremely comfortable, suitable for long-term riding..
  • ERGONOMIC DESIGN - Ribbed Texture Grip reduces vibration and hand fatigue, provides traction maximum control. The anti-slip layer design is not easy to slip whether by rain or sweat permeability, which greatly improves safety..
  • STANDARD SIZE - Length : 5.90inch/150mm, Inner diameter :1.25inch/35mm. Weight: 0.11lb(50g)/PC. Package contents: 1 pair 2 x grips and 2 x plug ends.The standard handlebar quality is also suitable for MTB/BMX bicycles..
  • EASY TO INSTALL - Easy to Install and Long Lasting. Only 1 minutes to install the grips with a little dish soap on the bars and use rubbing alcohol then wait until dry(Will install tight) and no glues needed..
  • BROAD PERFORMANCE - JOYCRUISE Scooter Grips have many Crazy Mixed Colors for your Choice. Suitable for Handlebar Grips works great for most Stunt Scooters (Standard or Oversized bar) MTB/BMX bicycle Bikes.100% quality assurance. Please feel free to contact us if you have any questions..
Check Stock

corki Low Rise Mountain Bike Riser Handlebars 31.8mm Length 720mm Riser 30mm Black

  • Aluminium alloy material ,Riser:30mm,Clamp diameter:31.8mm,Bar end diameter:22.2mm Sweep back angle:3°..
  • The alloy used in mtb handlebars is manufactured with micro-grain refinement, making the bar strong and light..
  • Sand blasted and anodised bike handlebars for fatigue resistance and durability..
  • A wider mtb bar gives more control,Wider bars also make breathing easier as your chest is allowed to expand more..
  • Compatible with most of mountain bikes and dirt bicycles.Great for XC downhill and Off-Road..
Check Stock

Genesis V2100 Men s Dual Suspension Mountain Bike Slate Gray

  • Alloy micro adjust 27.2 X 300mm seat post with quick-release.
  • Shimano EF40 integrated aluminum brake levers.
Check Stock

Rock BROS Mountain Bike Grips Handlebar Grip Bicycle Handlebar Grips Bike Handle Grips Double Aluminum Clamp Lock On Grips for MTB BMX Mountain Bike Handle Bar Ends Black Red

  • 【ERGONOMIC DESIGN】:Compared to the traditional bike handlebar grips, this grips expands the contact area of the hand, It can support from the index finger to the thumb, offering the best grip for natural state of riding. Reduce the pain in your wrist with the correct grip posture.
  • 【ANTI-SLIP&SHORK ABSORPTION】: The surface has anti-slip particles and lines that prevent vibration. The TPR rubber is very grippy. Not so soft that they feel squishy, not so hard that you’ll wonder if you even have grips. your hands no longer fall asleep on those long epic adventures through the trails.
  • 【Double Aluminum Clamp Bar Ends】: The grips hold onto the handlebars tightly by tightening down the collars on both ends. Aluminum lock ring can lock the handlebar firmly, don’t worry about moving.
  • 【EASY TO INSTALL】: This bike grips installation step takes only 3 steps. To begin installation of the handlebar grips, loosen the screws at the end with an allen key wrench included). The locks-ons make installing and removing the grips easy.
  • 【APPLICABILITY】Suitable for Bike Handlebars with Outer Diameter between 2.22cm bike handlebar grips for MTB, BMX, Mountain, Downhill, Folding Bikes..
Check Stock

Lim Black Racing CNC Bar End Sliders For Kawasaki NINJA 300 R 13-17 15 16 Z1000 ER-6F Ninja 650R Ninja 400 2019 2018

  • CNC Billet Bar Ends Bar End Sliders Pair Racing Bar Ends Handlebar Bar Ends.
  • Perfect Fit Kawasaki Ninja Motorcycle Handlebar Bar Ends.
  • Special Laser Logo Bar Ends Product Made by Billet Aluminium T6061-T6.
  • ZX 600 Ninja ZX6, Ninja 650R, ZX-9R Ninja, NINJA 250R, NINJA 300R, NINJA 1000 SX.
Check Stock

31.8mm Bike Handlebar PRO External Swing Angle Design Carbon Fiber Bicycle Handlebar Big Angle Bend Handlebars for GRAVEL Bikes Cross Country Road Bikes MTB Traveling 640mm

  • 【Material】：High-strength carbon fiber, with the softness of textile fiber, light weight, lighter than a quarter of steel. Strong strength, outstanding corrosion resistance performance. A new generation of reinforcing fibers..
  • 【Size】：31.8mm stem diameter, 580mm/640mm width, 22.2mm bar ends diameter..
  • 【Adjustable Angle】：Can be adjusted to a comfotrbale angle for better control of the bike and giving a better riding experience..
  • 【Application】: Universal fits for GRAVEL Bikes Cross Country Road Bikes MTB with 31.8mm stem diameter..
  • 【Easy to Install】：Take no more than 10 minuters to install. We offer free return service but please measure and confirm the diameter that you actually need before ordering..
Check Stock

Sanzhi Bike Stem 31.8 90mm 110mm 130mm 0-60 Degree Adjustable MTB Riser Stem Short Handlebar Stem Mountain Bike Stem for Bicycle, MTB, Road Bike, Cycling, BMX (Only Fit 1.25'/31.8mm Handlebar)

  • Please confirm your bike handlebar diameter is 31.8mm (1-1/4") and fork steerer tube diameter is 28.6mm (1-1/8") before order!!! Otherwise, the item is not suitable for your bike!.
  • Degree: 0-60° adjustable.Not applicable to Giant bicycles.The mountain bike stem is constructed of high-strength CNC machined 6061 T6 aluminum alloy.Lightweight and Durable MTB Stem - about 280g.
  • Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..
  • Just connect up the bicycle stem to original front fork stem. Four bolt bar clamp holds bar securely in position.The bicycle stem is easy to install, just connect up the original front fork stem. Four bolt bar clamp holds bar securely in position..
  • Boenoea adjustable handle bar stem suitable for most road bike,mountain bikes,downhill bike, track bike,fixed gear bicycle,MTB,BMX. The stem is not suitable for GIANT bicycles with 31.8mm fork diameter..
Check Stock

Funn Full On Mountain Bike Handlebar with Bar Clamp 31.8mm and Width 785mm Tough and Lightweight Alloy Riser Handlebar for MTB BMX and Road Bike Rise 30mm Red MTB Handlebars

  • Perfect Fit : The Full on MTB Handlebars are available in 31.8mm and 35mm clamp diameters. This version is for mountain bikes with a 31.8mm bar clamp only, measuring the clamp size before purchasing to make sure the handlebar will fit your stem..
  • Moderate Rise: Full on handlebar with 30mm rise provides a more comfortable and upright riding position without feeling too stretched out or too cramped for riders to challenge different terrains. With its well-designed shape and wide bar, Full on MTB handlebars offer more control and stability on rough or off-road terrain..
  • Small Sweep : Full on handlebar built with a smaller back sweep angle will position the hands and wrists relatively close to the rider's body, which can help to maintain a more upright and relaxed riding position..
  • Solid and Tough : Engineered from triple butted AL6061 aluminum to provide sturdy and lightweight construction, Full on has optimized durability yet still light as feather. With durable sandblasted and anodized finish, Full on is long-lasting and tough enough for intense riding..
  • Precision Control : Full on performs well both as bmx handlebars and downhill MTB bars, and is also the perfect choices for trail, enduro, XC and freeride. No matter is for casual riding or aggressive rac....
Check Stock

PRO BIKE TOOL Mini Bike Bike Tire Pump Premium Edition - Fits Presta and Schrader valves - High Pressure PSI - Bicycle Portable Tire Pump for Road and Mountain Bikes

  • New Premium Sleek attractive design with rounded ends and enhanced exterior design, I’m sure you’ll agree it looks pretty Awesome! Reach high pressures bicycle air pump up to 100 psi/6.9 bar..
  • Super Compact, Strong And Lightweight - Only 7.5inches / 19cm long and 4.3 ounces / 121g in weight, our handheld portable inflator is the best accessory for those cyclists and racers obsessed with marginal gains!.
  • Reliable And Built To Last -The Hand Bike Pump made from superior quality CNC machined aluminum alloy with durable and precise parts, which are built to last so you can have a safe and enjoyable ride..
  • Presta And Schrader Compatible - For Road and MTB's, our high performance mini bike pumps thread-on valve connection allows for a tight seal with no air leaks..
  • No Rattles Or Lost Pump with our safe & secure frame mounted bracket with extra security strap. Pre-drilled holes in bike frame required for installation of pump mount..
Check Stock

Gem Hand Pump - Green

  • Lightweight hand pump, essential to any MTB rider.
  • Convertible head for Presta or Schrader valves.
  • High Volume/High Pressure Compatible via the patented air switch.
Check Stock

BESNIN Adjustable Bike Stem 0-90 Degree 1-1/8'x31.8/25.4x60/80/90/93/100mm, Adjustable MTB Stem Mountain Bike Handlebar Stem for Bicycle, Road Bike, MTB, BMX, Cycling (0-90° 31.8 * 60)

  • size: 31.8x60mm Angle: 0~+90 adjustable Material: Constructed of high-strength CNC machined 6061 T6 aluminum alloy.
  • Advantages: 1. Two-in-one design of height increaser and bike stem, it saves your money to buy height increaser or bike stem.2. It can be adjusted from 0-90° (you can also think of it as 90-180°). it can be adjusted the height in the maximum range for the handlebar,giving you more riding options.3. The quality is guaranteed. Our shop specializes in selling bicycle accessories, professional factory, more reliable quality..
  • Made of aluminum alloy , lighter weight, better toughness, no deformation, corrosion resistance, provide security for your outdoor travel..
  • Easy Installation: Just connect up the original front fork stem.Four bolt bar clamp holds bar securely in position.
  • Bought this stem to enable you to convert an old MTB into a commuter bike.Suit for MTB ,BMX, DH, downhill bicycles, fixed equipment, road bikes, etc..
Check Stock

TRLREQ Universal Bicycle Shifter Cable Housing Set for Shimano Sram Derailleur/MTB Road Bike (Black)

  • ღThis derailleur cable is made of 3 layer:outer double PVC plastic layer.
  • heated alloy steel bunch layer and PETT inner pipe,temperature resistance,intense heat resistant with rapid and sensitive performance..
  • ღIncluded 4mm Diameter cuttable shift cable housing - 2000mm,1550mm front inner derailleur cable and 2100mm rear inner cable,long enough to custom the shift cables length..
  • ღWorks For Shimano or SRAM Front & Rear Derailleur universal,BMX,Road bike,MTB bike,folding bike etc..
  • ღPackage includes: 1 pcs 2m shift housing cable + 2 pcs shift cables(front 1.55m rear 2.1m) + 10 pcs housing End Caps+ 4 pcs S-buckles + 4 pcs cable end crimps + 4 pcs isolation protection clip..
  • ღCome with other cable and cable housing fittings like brake cable cover ends S-buckles Wire cover ends, protect the bike from scratches and keep the bike cable neat..
Check Stock