Categories

Best Multi Wire Battery Connector

Tetra-Teknica MotoBasics Series SAE-12 12V SAE 2 Pin Quick Disconnect Extension Cable with Dust Cover 12 Feet 16 Gauge

  • 12 feet of DC extension cord, ideal for projects in motorcycles, trucks, solar applications, RVs and cars.
  • 16 gauge wire for up to 3.7A for power transmission and 22A for chassis wiring.
  • Fits all Deltran Battery Tenders and allows access 12 feet from the battery.
  • Perfect for use with the multi-bank chargers.
  • Attached dust cover to protect 2-pin SAE connector.
Check Stock

Tetra-Teknica MotoBasic Series SAE-25 12V SAE 2 Pin Quick Disconnect Extension Cable with dust cover 25 Feet 16 Gauge

  • 25 feet of DC extension cord, ideal for projects in motorcycles, trucks, solar applications, RVs and cars.
  • 16 gauge wire for up to 3.7A for power transmission and 22A for chassis wiring.
  • Fits all Deltran Battery Tenders and allows access 30 feet from the battery.
  • Perfect for use with the multi-bank chargers.
  • Attached dust cover to protect 2-pin SAE connector.
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
  • 【Wide Application】These battery terminal connectors can be used for ....
Check Stock

SHENYANG 5 Pack MR-BAT ER17330V3.6V A6BAT PLC Battery for FANUC CNC System Power

  • ★ Battery Model Number : A6BAT Battery- Size 2/3A 3.6V Lithium Battery.
  • ★ 3.6v lithium battery with wire lead and connector ,2 wire 2-pin connector.
  • ★ Battery- Size 2/3A 3.6V Lithium Battery ； Dimensions battery: ø17 mm x 33.6 mm.
  • ★ Other applications: Alarm system, PLC memory backup power supply, CNC system, servo motors, machine tools, instruments, special electronic equipment, etc..
  • ★ Package Included: 5 x A6BAT ER17330V PLC Battery.
Check Stock

Universal USB/AC Fast Battery Charging Charger + Micro USB Data Cable for Alcatel Cameox 4G LTE 5044R AT&T

  • For Alcatel Cameox 4G LTE 5044R Phone Universal External Multi Function Wall Battery Charger USB Cable Connector Accessory..
  • Package includes: Universal Travel Dock USB/AC Battery Charger X 1.
  • Micro USB Cable Charging Power Data Wire ( 3 Feet/1M ) X 1.
  • Compatible with:Alcatel Cameox 4G LTE 5044R( AT&T ).
  • Accessory only,Cellphone and Battery not included..
Check Stock

DZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

LAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing

  • Package: Includes 5 pcs I TYPE 9v battery connector.
  • All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
  • Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
  • Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
  • Connection wires color of 9v connector: black and red..
  • Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
  • Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..
Check Stock

11.1V 5200mAh 6 Cell Lithium ion 18650 57.72Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 5200mAh 57.72Wh 18650 6 Cell Battery Pack.
  • High Density Rechargeable Battery Pack - Heavy Weight Battery Pack - Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

11.1V 2600mAh 3 Cell Lithium ion 18650 28.86Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 2600mAh 28.86Wh 18650 3 Cell Battery Pack.
  • High Density Rechargeable Battery Pack – Heavy Weight Battery Pack – Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

32GB 9-in-1 Linux Bootable USB for Ubuntu,Linux Mint,Mx Linux,Zorin OS,Linux Lite,ElementaryOS,Manjaro etc. | Top 9 Linux for Beginners| Try or Install | Boot Repair | multiboot USB

  • Compatibility: Our battery power connector is well-made, snug fit your battery, can install and lock your battery easily.Compatible with Milwaukee M18 battery 18v series..
  • Safety Design: For your safety, Our product has some security design. The switch ensures you can turn on&off the battery easily. The fuse supply overpowers protection. The copper contact improves the conductivity and safety. Heat-resistance 12 AWG wire is suitable for high-power batteries..
  • Easy to Install: Just move the power adapter to the inside of the groove, then push the converter and ensure it had locked the battery. ( Tips: If you want to remove the adapter from the battery, Please press down the buckle of the battery, then remove it. ）, there are 4 fixing screw holes on the adapter for easy fixing with screws..
  • Multi-function: Power wheels adapter has 12.6 inches of 12 gauge wire installed.
  • Maximum permissible current 18A, You can use it to upgrade your power wheels, toys, or Robotics DIY, high power application, etc. Let your kids have nearly endless power wheels fun with a 5-second battery swap out!.
  • High quality: Made of high-quality ABS Plastic，injection-molded，excellent scratch&shock resistance and chemical resistance and is impervious to heat, moisture, and corrosi....
Check Stock

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

  • SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
  • The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
  • The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
  • Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
  • Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
Check Stock