Categories

Best Multi clutch Torque Distribution Systems

SchaefflerLuK DMF023 Dual Mass Flywheel OEM Dual Mass Flywheel LuK Replacement Clutch Parts

  • OEM Clutch Replacement Kits: Our LuK DMF019 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch....
  • Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the....
  • LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a....
  • Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the....
  • OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is....
Check Stock

Drive Belt For Coleman Powersports KT196 Go Kart Buggy 4 Wheelers 196cc 6.5HP

  • Our replacement torque converter asymmetric belt for the Coleman KT196 go-kart replaces the belt numbers 203589, 203589A, 203589 A/DF, and 5959 used on Comet style torque converters. Fits many converter 30 series Torq-a-verter drive systems..
  • Used On Most Manco, American Sportworks and Ken-bar Karts with 5Hp-7Hp engines. Also used on the Comet Tav2 bolt on Torque-a-verter kit..
  • Compatible with torque converters with a 6" distance between the driven pulley and the driver clutch. This distance is measured from the center of each pulley. Not compatible with units with a distance of 7" center to center distance. The belt is asymmetric with a 3/4" wide top face, 18 degree angle on one side, 2.5 degree angle on the other side..
Check Stock

Schaeffler LuK DMF123 Dual Mass Flywheel, OEM Dual Mass Flywheel, LuK Replacement Clutch Parts

  • OEM Clutch Replacement Kits: Our LuK DMF123 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch replacement..
  • Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the flywheel-to-crankshaft bolt heads is so small that the flywheel must be replaced with every clutch installation..
  • LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a primary section that bolts to the crankshaft, and a secondary section, which the clutch is bolted onto..
  • Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the transmission. By design, dual-mass flywheels cannot be resurfaced..
  • OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is carefully crafted to suit the exact needs of a car, keeping in mind....
Check Stock

MOOSUN 30 Series Torque Converter Driver Clutch 3/4' Bore Go Kart for Comet 219552 5957

  • This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers..
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one..
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load..
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car..
Check Stock

VEVOR 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable.
  • it can reduce the engine load and get more power..
  • 30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4″ and a 5/8″ drive clutch, suitable for all engines with 3/4 “straight crankshaft.The 3/4″ drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76″, Outside circumference: 27″（68.8cm / 27″), Width is 3/4”.（1.9cm / 0.75″). Center to Center of driver and driven: 6.7″（17cm / 6.7″)..
  • UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts..
  • COMPLETE ACCESSORIES: The torque converter clutch includes： 1x 3/4″ drive clutch； 1x 5/8″ drive clutch； 1 x Plastic Assy Cover；1 x Aluminum Mounting Plate；1 x Drive Belt； 1 x 10 Tooth Sprocket for #40/41/420 Chain； full mounting hardware. Fully equipped, worry-free installation..
Check Stock

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4' Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

  • 【30 Series Torque Converter and Go Kart Drive Belt】 ：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
  • 【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
  • 【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
  • 【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
  • 【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....
Check Stock

TUPARTS Electric PTO Clutch Lawn Mower Clutch - Replace for 532179335 Fit for Husqvarna 179335 414737 532179335 for Craftsman GTH2548 2648 2654 2752 264 for Xtreme X0169

  • ...ince wires can be easily routed to a simple switch on the control panel versus linkages that would be required with mechanical units..
  • SOLID FORGED ROTOR - A one-piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque..
  • HIGH TEMPERATURE EPOXY COIL - In order to help prevent failure from both vibration and outside contaminants, all coils of our PTO clutch are sealed in the coil shell with a high temperature epoxy coating..
  • HEAVY DUTY FIELD PLATE - To resist deflection or breakage due to vibration, a thick backing plate is used. Projection welding enhances the connection to the coil shell. Please check the part number before purchasing..
Check Stock

TUPARTS Electric PTO Clutch Lawn Mower Clutch - Replace for 53462700 Fit for Ogura GT1A-EH01 53462700 for Ferris 5100417 for Dixie Chopper 500144

  • ...ince wires can be easily routed to a simple switch on the control panel versus linkages that would be required with mechanical units..
  • SOLID FORGED ROTOR - A one-piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque..
  • HIGH TEMPERATURE EPOXY COIL - In order to help prevent failure from both vibration and outside contaminants, all coils of our PTO clutch are sealed in the coil shell with a high temperature epoxy coating..
  • HEAVY DUTY FIELD PLATE - To resist deflection or breakage due to vibration, a thick backing plate is used. Projection welding enhances the connection to the coil shell. Please check the part number before purchasing..
Check Stock

KENDA Juggernaut Tire 26 x4.00 Wire Clincher DTC 60TPI Black

  • 【Brand new predator 212cc 6.5 hp go kart torque converter clutch kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular....
  • 【TAV2 30 Series Go Kart Clutch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or....
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75").....
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission,....
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
Check Stock

SEYVUM P10 21V Cordless Drill Set, [Powerful Brushless Motor] [Compact], Power Drill Driver, Electric Drill with Li-ion Battery, Fast Charger, Variable Speed, 57pcs Drill Bits with Tool Bag

  • ... with brushless motor, high power ceiling, and long service life. The maximum speed of the drill is 1500rpm, and the maximum torque is 400in-Lbs. Also brushless drills don’t generate friction or heat during use, last longer than brushed motors, require little maintenance, and perform better and more smoothly.
  • 25+1 CLUTCH & METICULOUS AND THOROUGH - An 25+1 position clutch prevents the stripping of screws and delivers 400 in-Lbs (45N.M) of max torque. Power drill's multi-position clutch will deliver precise power where you need it. When faced with a change of density in materials. The electric drill allows you to set the gearing for low speed and high torque or high speed and low torque.
  • 2 VARIABLE SPEED ADJUSTMENT - The electric drill is designed with variable 2-speed settings (0-550 rpm and 0-1500 rpm) for multiple purposes. The drill trigger controls the speed. Being able to vary the speed makes it easier to start holes, drive screws, and drill metal. The reversibility option can help reverse drills out of holes and remove screws.
  • 1H FAST CHARGE - Our power drill cordless used with a max 21V Lithium-ion battery and 1H fast charge. At the same time, the brushless motor consumes less energy and has a longer running time. Battery level display at ....
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

VEVOR Slip Clutch 1 3/8 PTO Slip Clutch Smooth Round Ends PTO Friction Clutch Carburized Steel Tractor Slip Clutch Adjustable Rotary Cutter Slip Clutch Black Brush Hog Slip Clutch for PTO Shaft

  • Quality Pto Slip Clutch: The tractor PTO slip clutch is made of advanced 20CrMnTi carburized steel, which has high durability and impacts resistance properties. The black-painted surface is smoothing and anti-weary. Thus, it can withstand higher torque and speed to gain better protection for your PTO shaft..
  • 1 3/8" Round Shaft Ends: Constructed in round smooth ends, this PTO shaft slip clutch has a size of 1 3/8" for both male and female ends. It fits the PTO slip shaft, matching perfectly with the same diameter of your implement input shaft and tractor output shaft, featuring superior safety functions as shear bolts..
  • Adjustable Torque Setting: With rated torque 900 nm, adjustment range: 20 - 55 hp, You can adjust the overall length of the tension springs to set an appropriate torque for your rotary cutter slip clutch. Just tight/loose the eight nuts by 1/4 of a turn and check its tightness for correct operation..
  • Replaceable Friction Disc: The PTO friction clutch adopts an essential spring and disc set up, assembled with fiction discs inside to help transmit forces, allowing two sides of the PTO shaft to spin at different speeds..
  • Wide Range Application: Adding a slip clutch for PTO is meant for protection. It works as an extra safety line with PTO dri....
Check Stock

New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4 Bore Max Torque

  • This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a....
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine....
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help....
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is....
Check Stock