Best Multi flute Handheld Reamer Set

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

uxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter

  • Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
  • Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
  • Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
  • Package Content : 1 x Adjustable Hand Reamer.
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

Utoolmart Adjustable Hand Reamer 23-26mm High Speed Steel H8 Milling Cutter Tool 1pcs

  • 【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • 【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • 【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock