Furnace Draft Inducer/Exhaust Venter Motor Fits Jakel 1172823
- Multi-speed, constant torque, brushless DC motor.
- NEMA 48-frame (5. 6 inch diameter) belly band mount with 5-inch long 1/2 inch diameter shaft.
- Four discrete speeds using 24VAC, plus automatic continuous fan speed.
- Designed to replace direct-drive blower motors in residential and light commercial indoor furnaces, air handlers and package systems that were designed with a 6-pole 1075rpm rated PSC motor.
- Replaces / Supersedes: American Standard & Trane MOT13004 , MOT-13004 , MOT12888 , MOT-12888 , MOT12292 , MOT12319 , MOT12542 , Carrier / ICP HD44AE137 , HD44AE137A , HD44AE138 , 1172987 , 1173682 , 5SME39HKL017 , 5SME39HXL285 , 5SME39HXL298 , S81-948 and other 1/2 HP X13 Constant Torque Motors from ALL Major Manufacturers as well as the Azure Digi-Motor # 10800..
- DOES NOT REPLACE EON , 3. 0 , 2. 3 and 2. 5 ECM Motors.
- 1/2 Horsepower , 208-230 VOLT , Universal X13 Replacement Motor.
Check StockHoneywell S688A1007 Sail Switch
- Simplified installations with multi-speed fans, in- accessible air handlers, fan motors with voltage or phase different from controlled equipment.
- Polyester film sail mounted on a micro switch snap switch.
- Removable spring counterbalances sail to allow mounting in either vertical (up or down) or horizontal air flow.
- Low air velocity switch operation makes at 250 fpm and breaks at 75 fpm.
Check StockMinn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black
- Designed to meet the increased stress created by high thrust motors and long shaft lengths.
- Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
- Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
- Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
- Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock
Trane SF AC Condenser Motor - 1/4 HP - 208/230 Volts - 1075 RPM – 48Y Frame - SFMC251SP2V - Replaces Emerson 1860 – A O Smith FSE1026S - GE 3728 - Fasco D909
- Trane Condenser Motors are designed to survive in harsh environmental conditions, rugged designed and field tested by the engineers and technicians. A reliable condenser motors for air conditioner that can last years to serve you..
- Trane AC Condenser Motors are UL approved for USA and Canadian market and Class “B” insulated..
- Trane Air-Conditioner Condenser motors are High Efficiency, Low Power Consumption, Continuous Duty, Contained Air Over, Thermally Protected, Reversible Rotation, Suitable for 48Y Frame mounting brackets, mount in any direction, Shaft Size: 1/2 Inch Diameter x 5 Inch Long..
- Trane Condenser Motor for air conditioner replaces other brands condenser motors: - Emerson 1860 - AO Smith FSE1026S - Fasco D909 - GE Regal Beloit 3728.
- Trane Air-Conditioning name stands behind the quality, reliability and superior performance of these Condenser motors. Buy the best, buy Trane AC Condenser motors.
Check StockA1458R,1/6-1/3HP Condenser Fan Motor 1075RPM
- Multi-HP, 1/6-1/3HP multi-HP Condenser Fan Motor, 1075RPM, 2.8AMP.
- Capacitor (required but not included): 7.5MFD/370V.
- Broad-Ocean multi-HP condenser fan motors are ideal for truck stock. Three 1075 RPM motors & two 825RPM models cover applications from 1/8 to 1/2HP.
- This motor is the same as one of our other listings, A1458 (search “B07VF89GZK on Amazon).
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands.
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors.
Check StockBaQiRo Stainless Steel 20hp Outboard Motor Bracket Kicker for Marine Boat
- With the sturdy design and smooth, spring‑assisted action, it is quick and easy to lift auxiliary or kicker motor..
- Mounting Size 8” × 8-5/8”, Broad Size: 8-1/4” × 10-3/8”..
- Full adjustable, 4‑position mounting plate accommodates a wide variety of motor and transom configurations..
- Fits most style of 2-stroke outboard motors.
Check StockDGZZI Gear Reduction Motor Holder 1Set Black 37mm DC Geared Motor Mounting L Shaped Bracket with 6mm Hexagonal Coupling and Mounting Screws
- Wear-resistant and not easy to rust, durable and not easy to bend. Black plating makes it more stylish and chic..
- The metal motor bracket has mounting holes for easy installation. The precise mounting holes match the M3x6mm screws perfectly, which saves you more installation time..
- Convenient mounts are suitable for these small motors.Ideal for many hobbies and alternative applications such as model cars and robots.Ideal for 37mm pinion stepper motors..
- Can be used for 37mm gear motors. Suitable for fixing 37GB, 37GA gearbox..
- Packaging Includes:1PC 37mm DC gear reducer motor mount,1PC 6mm hexagon coupling,2PCS hex coupling screws,10 sets of mounting screws and nuts..
Check StockPro Controll EZ Mount II Bow Mount Trolling Motor Bracket
- UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
- Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
- STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
- Indestructible fiberglass reinforced nylon.
- FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
- Spend less time assembling and more time fishing.
- ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
- EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
- Built with the needs of the Angler in mind.
Check Stock
Advanced VX 6 Refractor Telescope
- 6-Inch Refractor Optical Tube: Astroimagers who demand the highest possible contrast for planetary imaging and brighter deep-sky object viewing choose the Celestron Advanced VX 6-inch Refractor Telescope.
- Advanced Computerized GoTo Mount: Celestron's Advanced VX Mount is integrated telescope support, alignment, and guiding system and was specifically designed to provide optimum imaging performance for smaller telescopes.
- Motors: The Advanced VX improved motors offer more torque and can handle slight load imbalances with ease.
- Design: An updated industrial design offers more rigidity, less flexure, and improved aesthetics. The new design allows viewing or imaging across the meridian without interference from the motors housings, so you can seamlessly image the best part of the night sky.
- SkyAlign Function: Observers and astroimagers will be impressed by the seamless operation of the Celestron Advanced VX 6-inch Refractor Telescope's SkyAlign function. It makes computerized aligning of the telescope fast, easy, and accurate--simply point at any three bright objects in the sky and the telescope aligns itself.
Check StockStainless Steel 20hp Outboard Motor Bracket Kicker for Boat
- Material: Stainless steel, Base is made of plastic..
- Mounting Size 8” × 8-5/8”, Broad Size: 8-1/4” × 10-3/8”..
- Perfect for sailboats, powerboats, locks and holds motor up or down in two vertical running positions..
- Fits most style of 2-stroke outboard motors.
Check StockISURE MARINRE Aluminium Boat Outboard Motor Bracket Kicker 7.5-20HP Heavy Duty Trolling Yacht
- ➤Material: Anodised aluminium construction，solid polypropylene mounting board..
- ➤Suitable for 2-stroke 7-1/2-20HP motors, with a maximum weight of 52kg (115lbs), very suitable for small and medium motor boats and yachts..
- ➤Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options..
- ➤Sturdy design with smooth, spring-assisted lifting action Fully adjustable with 5 stop locations..
- ➤Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components..
Check Stock
Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks
- 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
- 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
- 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
- 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
- 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check StockAQUOS EASYMATE Folding Marine Outboard Motor Stand/Outboard Engine Carrier for Small to Medium Boat Engine, Max 20HP / 90 LBs
- MOTOR CARRIER – No more lugging boat motors! The Guide Gear Motor Carrier helps you expertly maneuver heavy boat motors around the shop, driveway, or garage..
- DURABLE – Made from 1” tubular steel for robust durability with a tough 1/2" plated steel axle. Easily transport your boat parts with the heavy-duty Motor Carrier..
- WEIGHT CAPACITY – The Motor Carrier is designed for moving boat engine motors of up to 85 lbs. Features ergonomic, easy-grip handles for simple movement..
- TOUGH WHEELS – The engine stand includes tough 7" semi-pneumatic rubber wheels which provide stability and support under heavy weight..
- MOUNTING BOARD – The motor stand features a molded mounting board. 46" tall from top of handle to ground..
Check Stock
