Categories

Best Multi stage Telescopic Cylinders

JCB 991-00012 Aftermarket Hydraulic Cylinder Seal Kit by Kit King USA

  • Jcb equipment types: backhoe loaders, rough terrain forklift, telescopic handlers, wheeled loaders & more.
  • Jcb equip. Models: 1400B, 1550B, 1700B, 3C, 3C 1400, 3C 1550, 3Cx, 3D, 3D 1700, 3Ds, 4C, 4Cn, 410, 410M, 412, 415, 420, 430, 530B, 921, 926, 930 & more.
  • Typical hydraulic applications: arm, boom, stick, stabilizer, swing.
Check Stock

Jump at the Dump / Road Block

  • Performance Props: Cloak shaped wing make you like a butterfly, let you be a most eye-catching star on the stage..
  • LED Glowing: With many LED lamp beads which has high brightness and can illuminate the entire performance area..
  • 2. Set telescopic baton to desired length.
  • 3.Place baton inside slot on both sides or veil.
  • With Stick: The wing comes with a pair of portable telescopic sticks..
  • Application: Perfect for belly dance shows, annual fancy-dress rave, stage, Halloween party, Christmas outfits, bar etc..
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

JCB 991-00130 Aftermarket Hydraulic Cylinder Seal Kit by Kit King USA

  • Jcb equipment types: backhoe loaders, js tracked excavators, telescopic handlers, wheeled loaders & more.
  • JCB Equip. Models: 1400B, 1550B, 1600B, 1700B, 1700B, 3C, 3CX, 3C 1400, 3C 1550, 3D, 3DS, 3D 1700, 4C, 4CN, 4CX, 408, 409, 410, 412, 520M, 530-95, 814S R'Master, 818, 818S R'Master & More.
  • Typical hydraulic applications: arm, dipper, stabilizer, swing.
  • Cylinders: 55936100, 55936300, 55936400, 55943200, 55944000, 55950200, 55952800, 55952900, 55953400, 55953500, 55953600, 55953700, 55944000, 55950000, 55950200, 55960004, 55960005 & more.
Check Stock

12'' Dial Height Gage Black DIAL FACE Shockproof 8'' X 0.001'' Dial Height Gage

  • 【Compatibility】This cylinder honing tool has a wide range of applications, and meets or exceeds the original factory specifications, can be directly replaced to meet your various needs.Suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in..
  • 【Adjustable】Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【Professional Tools】This cylinder honing tool has high accuracy and sensitivity,cylinderc Honing Tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【High Quality Materials】This cylinder honing tool are made of high-quality iron material,no rust, and high strength for maximum durability.Manufactured according to strict quality control standards, the improved design can extend the service life..
  • 【Production Guarantee】From the purchase of original materials to the factory inspection of products, inspections must be carried out at every....
Check Stock

Keenso 3Pcs Universal Foldable Aluminium Alloy Stoving Varnish Mini Antishake Telescopic Tripod Telescoping Tripod Stand Monocular Telescope Camera Tripod

  • 【Foldable & Stretchable】--Small tripod, fixed and anti-shake, don't take up space, take advantage, folding 15cm, pull 20cm, maximum load 0.3kg..
  • 【2 Stage Telescopic Foot Tube】--Exquisite stoving varnish, two stage telescopic foot tube, low angle adjustment, rubber non-slip pad..
  • 【International Standard Interface】--The upper thread interface is the international standard interface of telescope, camera, digital camera..
  • 【Locking Device】--There is also a locking device, after adjusted the angle, used to lock, not swing..
  • 【Mini Design for Outdoor Travel】--Mini design, super small and weightlight, convenient to caar, necessary for outdoor travel..
Check Stock

Merax 3 Pcs Luggage Set with TSA Lock Lightweight Expandable Luggage Spinner Suitcase Set

  • This modern 3 piece luggage set is engineered with both design and durability in mind. Made of ultra-light but impact-resistant ABS shell, the small....
  • Multi-stage telescopic handle adjusts to different heights for comfortable maneuvering. Comes in glossy 6 colors with smoth-rolling spinner wheels..
  • The combination lock is TSA Approved allowing the US Transport Security Association to inspect your luggage without having to damage your locking....
  • The features of anti-uv radiation and anti-aging ensure you to use the luggage for years. The zippered divider and garment straps keep content....
Check Stock

Miele Electro+ Canister Vacuum Marine Blue (Compact C2)

  • Air clean sealed system. Nominal power consumption in W : 1,100.
  • 6 stage variable speed Miele Made Vortex silence motor.
  • HEPA air clean filter. Filterbag volume in Liter: 3.5. Seb228 Electro plus.
  • Optimum carpet care - electrobrush for intensive deep cleaning. Gentle on sensitive hard floors - soft parquet brush. Maximum suction power – 1,200 W.
  • Sbb parquett-3 hard floor nozzle.Telescopic suction wand:Electro telescopic tube.
Check Stock

1/8\ Stainless Steel Tumbling Media for Jewelers 2 LBS Mix Shapes Tumbling Media

  • ⭐ Non-Abrasive Ceramic Small Tumbling Media. 3/16” dia. X 3/8” long, angle cut cylinders..
  • ⭐ Perfect for protecting stones or filling while rock tumbling. Cushions, quiets and improves tumbling action. Works with all tumbler types..
  • ⭐ No need to keep separate for each stage – rinse and use the same batch through all the tumbling stages. Non-toxic, non-static and non-residue pellets are dryable and easy to reuse..
  • ⭐ Compatible with any brand tumbler or grit..
Check Stock

[Newest] VANMASS Magnetic Phone Mount for Car, [Never Fall Off] Super Strong Magnets Car Mount Dashboard Phone Holder for Dash Windshield Air Vent, Compatible with iPhone Samsung & All Phones

  • [Grandmaster Design]: Industry-only made of Solid Aluminum Alloy & KING of Plastic, the 2023 Version took 6 years to optimize 117 models & test 156 kinds of material. Luxury look & streamlined alloy structure is certified by RoHS, CP65, REACH.
  • [No Block Your Driving View]: Millions of Users Prefer 3-stage Telescopic Alloy Arm - Longest, Sturdiest yet, unlike any other BULKY plastic stuff. 360° rotating magnetic head and 270° adjustable telescopic arm for adjusting any angle without blocking your view at all.
  • [4 Technologies for Top Safety]: 1) Extreme 9LB magnetic force for all devices 2) Extreme -40~194℉ resistance 3) Extreme 50 LBS sticky&suction force 4) Extreme 10,000 times vibration resistance. Thanks to Millions of users' voice, we are always keep upgrading.
  • [Never Worry About Your Phone Falling]: VANMASS magnetic phone holder for car brings super sticky suction cup & steel-cored vent clip from 3000+ surveys to accompany you anywhere.
  • [Luxury Present: Top-notch Configuration]: Exquisite magnetic car mount is fully protected in Elegant & Eco-friendly box. 1)Package included (1*suction cup, 1*vent clip, 1*pad, 1*manual, 4*metal plate) 2)Car/Desk/Kitchen/Bathroom/Gym, meet your multi-scenario use needs.
Check Stock

Short Microphone Stand with Boom Arm by GRIFFIN | Low Profile Tripod Mic Stand Mount for Kick Bass Drum, Studio Desktop Recording, Singing, & Guitar Amplifiers | Small Height Telescoping Boom Holder

  • SHORT, SAFE AND SECURE MICROPHONE HOLDER: This compact, deluxe short microphone arm stand is ideal for drummers needing a microphone for their bass drums, musicians mounting a mic in front of guitar amplifiers or anyone else needing a low-profile microphone.
  • TELESCOPIC, REMOVABLE BOOM MIC ARM: Thanks to its efficient design with 2 interlocking steel pipes, the telescopic boom arm allows you to reach further and provides more flexibility. The mic stand boom can also be removed whenever you wish and converted into a straight microphone stand to accommodate your changing needs..
  • MICROPHONE BOOM ARM DESIGNED TO LAST: Well-built with extremely durable, steel tubing construction, these telescoping tripod microphone boom stands are made to withstand constant use and will last for years to come. Stable, tough, and with a nice black finish that gives this small mic arm stands a beautiful, sleek appearance, these are some of the most affordable solutions for every professional or amateur performer..
  • EASY TO TRANSPORT MINI STUDIO MICROPHONE STAND: With an adjustable height, lightweight design, and a collapsible tripod boom to help with travel and easy storage, this telescopic tripod microphone stand is easy to pack and bring with you everywhere. This short mi....
Check Stock

K Tool International 1,000 lb (1/2 TON) Telescopic Transmission Jack, Two Stage (XD); Heavy Duty 2 Stage, Lifting Range 35\ to 74.2\

  • [2 STAGES] - The 2 Stage Transmission Jack can be lowered through its second stage which is a much lower height than the lowest height of the single stage transmission jack. The lower position of the two stage jack allows the operator to safely roll the transmission throughout the shop when mounted on the transmission jack.
  • [HANDS FREE] - Foot pump and release pedals provide hands free operation to align saddle with transmission.
  • [QUICK USE] - Speedy pump foot pedal raises telescopic rams to load quickly.
  • [OVERLOAD PREVENTION] - Built-in safety valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 2 year warranty and complies with ASME PASE/2014 Safety Standards.
Check Stock

W4-moto 1100LBS 2 Stage Hydraulic Transmission Jack Stand w/ 360°Swivel Wheels Lift Lifter Hoist for car Lift auto Lift (Red)

  • High Quality:Strong steel construction for maximum durability, and paint coated surface for rust-resistance..
  • Specification:Load Capacity: 1100Lbs / 0.5 Ton.
  • Lift Range: 33 inch (850mm)-70 inch (1790mm).
  • Design:It is features fully adjustable saddle with corner brackets. Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement..
  • Easy Movement: Comes with foot operated pump and lowering pedal, great lift range by telescopic two-stage hydraulic ram, wide 4-leg base with swivel casters for stability and easy movement..
  • Application: Floor jack can be used in many places, including car gearbox, auto repair station and other objects weighing no more than 1100lbs.It's ideal for any automotive or light truck..
Check Stock