Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

Brass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated

  • 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
  • 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
  • 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
  • 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
  • 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check Stock

FORMUFIT 3/4\ PVC Fittings, 3-Way Corner Connector, Furniture Grade, Orange (8-Pack) - for Greenhouse, PVC Pipe Furniture, Maker Projects | Fits 3/4 inch PVC Pipe - F0343WE-OR-8

  • EASY TO USE: The FORMUFIT PVC 3-Way Corner Fitting is the fastest and most effortless way to build structural PVC projects with 3/4" PVC pipe. With these PVC fittings (3/4 inch), you can make cubes, PVC pipe furniture, boxes, or right-angle configurations which require a corner or three-point connection. This PVC 3-Way Connector has three (3) extra-deep sockets on separate planes at 90 degrees to each other..
  • GENUINE FURNITURE GRADE PVC: FORMUFIT 3-Way PVC Corner fittings are 3/4" PVC fittings that are injection-molded using ultra-strong, premium furniture grade PVC resin.
  • a superior engineered plastic designed for outdoor use, weatherability, and can be used in direct sunlight. UV resistance maintains fitting durability and appearance through years of exposure to varying weather conditions. In addition, this 3/4" PVC elbow has an impact strength that is five times as strong as other PVC pipe connectors due to the formulated impact modifiers..
  • SAFE AND NON-TOXIC: FORMUFIT 3Way PVC Fitting products are approved for fluid handling in hydroponics, aquaponics, residential irrigation, and aquarium use. These 3/4" PVC pipe fittings do not contain heavy metals, off-gassing phthalates, dioxins, or calcium cobalt filler as seen in imported, imitation/look-a-lik....
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

ARVATO Leopard Braceletas for Women Metal Brass Pipe Charm Beads Stranded Wide Multilayer Animal Cheetah Print Magnetic Boho Cuff Leather Bracelet

  • 【STYLISH DESIGN】 Leopard print reflect a little of wild and sexy. Little Round Charm makes this wrap bracelet looks gorgeous and fashionable,You....
  • 【HIGH QUALITY】This wide wrap bracelet is made of high quality leather with leopard pattern and real horse hair.Multilayer leather bracelet is....
  • 【AVERAGE SIZE FOR MOST WRIST】 This women's leather bracelet is with length 7.68 inches, width 0.91 inches,fit most women and girls wrist. Weight....
  • 【A UNIQUE GIFT】 The leopad print and craftsmanship of brass pipe make this leather cuff bracelet a thoughtfull classic gift for your special....
  • 【About ARVATO】 This multilayer wrap bracelet is designed and produced by ARVATO.We promise 90-day Products Guarantee, if there are any problems....
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【[Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock

Brooklyn Pipe Flange - 16 Pack 3/4' Black Floor Flange Cast Iron Pipe Fittings | Our 3/4 Inch Pipe Flange | Industrial Pipe Flanges | Decorative Pipe Fitting Fit for Steampunk Furniture

  • 3/4 INCH FLOOR FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for DIY projects only, they are not rated to carry gas nor water..
  • INDUSTRIAL DECOR- Our 3 hole black floor flange is 2.75" inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project..
  • SUPPORT AMERICAN BUSINESS – Brooklyn Pipe is a small business headquartered in New York. We would really appreciate the opportunity to show you what makes Brooklyn Pipe the #1 top rated pipe fitting brand. We always go the extra mile for our awesome customers!.
  • NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market. Our 3 hole flange is just as strong as the competition but simply looks better!.
  • QUALITY CONTROL - We’ve partnered with world class steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged. Rest assured you are getting to....
Check Stock