Categories

Best Multiple Inputs Recorders

Universal NTSC PAL Video System Converter

  • Ideal for converting videos produced from different countries onto DVD disc or video tape for media players or recorder of the local system. Supports....
  • Supports inputs of worldwide video standards of NTSC, PAL(B/D/G/H/I/K) and SECAM signals. Selectable NTSC or PAL output format via dip switch for....
  • Automatic gain controller hardware built into for ensuring the output signal has accurate and identical level as the original input signal without any....
  • Digital comb filter for input system decoding and full digital decoding and encoding. Full digital field rate processing for high-resolution picture....
  • Works with most DVD players/recorders, video cameras, VCRs, satellite receivers, video monitors and television systems of all kinds. Compact size with....
Check Stock

WERJIA Hard EVA Travel Case Fits Tascam DR-07X Portable Digital Recorder

  • Tascam DR-60DMKII + EMB Cable + Gravity Magnet Phone Holder Bundle.
  • Fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limits of the camera’s microphone in.
  • Record up to 4 channels at a time to the internal SD Card, at up to 96kHz/24-bit WAV file resolution.
  • Two mic inputs utilize locking XLR connectors with 48V phantom power.
  • the other two use a 1/8” stereo connector for wireless and lav mics.
  • The channel 3/4 input connector supports a high-level maximum input – up to +10dBV.
Check Stock

BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range

  • POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly..
  • WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com.
Check Stock

California Project

  • ...as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Blackmagic Design ATEM 2 M/E Production Studio 4K, 4 Upstream & 2 Downstream Keyers, 22-Input Audio Mixer, 20 6G-SDI & 1 HDMI Inputs

  • ...resynchronizer so you can use sources without genlock such as consumer HDMI cameras or even computers for live PowerPoint presentations.
  • Outputs: ATEM includes program and down converted program outputs plus auxiliary outputs allowing clean feeds, perfect for connecting to giant outdoor LED screens, projectors, disk recorders, monitors and broadcast decks. The multi view outputs are 1080i HD so you can use any TV or monitor. You also get a balanced XLR output of your audio mix, which is also embedded into all video outputs.
  • Multi View Monitoring: ATEM's built in multi view lets you monitor the switcher’s video inputs on a single SDI monitor or regular HDMI TV. Multi view outputs in regular 1080i HD, so even if your broadcast is in SD or Ultra HD you can still use a standard TV for monitoring. You can customize the multi view layout and also add custom labels. Multi view makes it easy to watch your program, preview, and live sources all simultaneously on a single monitor.
Check Stock

BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db..
Check Stock

Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs..
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s).
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • ...as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Saramonic 5.8Ghz Wireless Lavalier Microphone System 3 Bodypack Transmitters & Receiver Kit Professional Video Microphone VMICLINK5

  • 3 wireless beltpack lavalier transmitters with a single lightweight three-channel camera-mountable receiver with XLR and 1/8“ (3.5mm) output cables....
  • Incredibly easy-to-use with plug-and-play operation, headphone monitor output in case your camera lacks a headphone jack, up to 6 hours of power from....
  • Perfect for DSLR, video cams and portable audio recorders for interviews, event videography, film dialog, field recording, broadcast TV and news....
  • Operates in 5.8GHz frequency range which is less congested than 2.4GHz, UHF and VHF, detects interference and automatically switches channels, offers....
  • Line-level audio inputs for getting audio from sound systems, smartphones, and more.
Check Stock

ANLEON Stereo Line Mixer four channel mixer, microphone XLR RCA mixes audio

  • four channel mixer with individual volume controls. It has three stereo inputs with RCA connectors (one input has both RCA and 3.5mm 1/8 inch stereo jacks) and one XLR input with switchable on/off phantom power, for a total of four inputs.
  • The unit has one microphone XLR input along with an 1/8” input and 3 sets of stereo RCA inputs..
  • the unit has a Stereo RCA jacks and a headphone /line output.to mix multiple sources (various computers / macs / consoles / etc...) into a single feed to output to amp..
  • MX200 is a useful audio tool for any situation where multiple consumer-level products need to be summed to a single stereo output..
  • accept inputs from a TV/phone/MP3/Mac Mini/PS3/Xbox/ FM Tuner and Phono Player,to desk speakers.
Check Stock

Saramonic Miniature 2-Channel 3.5mm Microphone & Audio Mixer with TRS & TRRS Output Cables for Cameras, Smartphones, Computers & More (AX1)

  • Battery-Free Passive 2-Channel Micro-Mixer for Powered Microphones, Wireless Microphone Receivers and other Audio Sources.
  • Two 3.5mm TRS Inputs to a single 3.5mm TRS Output with selectable Mono/Stereo output and two input level attenuators to control the audio mix.
  • Includes both TRS and TRRS Output Cables for use with Cameras, Smartphones, Tablets, Computers, Recorders and much more.
  • Incredibly Compact and Lightweight, it easily fits into even the tightest set-ups and smallest rigs and has a standard 1/4″-20 mount.
  • Ideal Mixer for Micro Wireless Systems and Battery-Powered shotgun mics like the Blink 500, Blink 500 Pro, CamMic+, Vmic mkII series and more.
Check Stock

BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space

  • ... inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 13.58” x 10.43” x 3.15”, Weight: 10.45 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock