Categories

Best Multipurpose Welding Electrode Clamp

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

ZenStyle Arc Welding Machine DC Inverter 160AMP 120V/230V Dual Voltage IGBT Stick Arc Welder

  • 〖Dual Voltage〗Practical dual voltage input design ensures you don’t need to worry about the voltage, and adopts IGBT module technology for energy-saving and stable heat dissipation.
  • 120V / 230V / 60Hz Input current at rated output 20 Amp 160 Amp / 23V / 60% Duty Cycle / ETL Listed.
  • 〖Multipurpose〗This welder is suitable for welding mild steel, stainless steel, aluminum and other kinds of metal.
  • It is great for welding, maintenance, repair, light industry and more.
  • Package includes electrode holder and 5 ft cable, work clamp and 6.7 ft cable, input power adapter cable and plug.
  • 〖Portable Design〗Compared with other conventional large bulky welder, this lightweight portable welder is designed compactly, and has a carrying handle for easily transit and storage, allows you to take it to anywhere you need.
  • 〖Convenient Yet Safe〗This inverter has the ability to be plugged into a 110V wall socket with household current instead of high voltage.
  • Its over-voltage protection, under voltage protection, over current protection, over load protection designs ensure you are safe when you use it.
  • 〖Ideal Choice〗The inverter welder switches AC power to DC then incorporate a stepdown transformer to produce the proper voltage and current, ideal for hi....
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...e better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contact tip of this welding torch is 0.8mm. If you use 1.0mm welding wire, you need to change the contact tip. (If you have any questions in use, please feel free to contact us. We will reply you within 24 hours.).
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

ARC-160 Amp Stick Arc DC Inverter Welder, 110V & 230V Digital Display LCD Welding

  • Advanced control module IGBT, improves the performance of the welding machine..
  • Start arc easily, stable welding Arc, deep weld pool and beautiful welding shape..
  • This is optimized to deliver a flawless weld, making spatter and post-weld clean-up almost non-existent..
  • Over voltage protection, under voltage protection, over current protection, overload protection, fan automatic temperature control..
  • 115V/ 230V/ 60Hz input current at rated output 20 Amp, 60% duty cycle at 160 amps..
  • 10 feet 300A electrode holder & 10 feet 500A work Clamp cable..
  • Etl listed, All machines tested in the USA..
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A)

  • ★Electrode Holder can be used for 300A..
  • ★Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions..
  • ★MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • ★Constructed for long life and dependability.
  • ★Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs..
Check Stock

SIMDER MIG Welder 140A Flux Core Welder MIG/Stick 2 in 1 Welding Machine Gasless 110V/220v Dual Voltage IGBT DC Inverter Welder

  • 【Easy Start for Beginner】The Synergic mode on this MIG welder will automatically change the voltage by adjusting the current. Very easy to operate and start for beginners. Advanced IGBT&Inverter make this MIG welder a portable and efficient welding tool..
  • 【Dual Voltage ARC&MIG Welders】This is an ARC&MIG 2 in 1 Welding machine. 140Amp DC 110V/220V Dual Voltage MIG welder. Package includes MIG Torch,Electrode holder,Ground clamp, 110V/220V Adapter and etc..
  • 【Multi-Application MIG Welder】This Wire Feed MIG Welder is suitable for welding iron, carbon, steel and etc. Great choice for household welding, or DIY project on steel..
  • 【APPLICABLE FLUX CORE WIRE & RODS】The wire MIG welder apply for .030"(0.8mm) &. 035" (1.0mm) welding wire. ARC mode fits rods: E7018, E6013, E6011..
  • 【What’s more】SIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, feel free to contact us.
Check Stock

HITBOX TIG Welder 110V 220V 200A 2T 4T TIG Stick MMA IGBT Inverter High Frequency Dual Volatge Welding Machine (Model: TIG200A)

  • Ship from the United States. Dual Volt 200 amp IGBT Tig Stick Welder with tig torch, earth clamp, electrode holder and gas tube..
  • Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown.
  • Inverter frequency up to 100KHZ, the technology is mature, stable performance.
  • TIG Welding thickness 0.5-6mm, and application of electrode diameter (MM): 2--3.2mm.
  • Easy arc ignition, litter spattering, stable current and good shaping.
Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

  • Larger spark translates to more power and superior fuel economy.
  • 0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
  • 0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
  • DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..
Check Stock