Best Narrow Opening Clamp

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

• Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
• Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
• The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
• Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
• SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

• HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
• CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
• LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
• WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
• EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..

PONY Malleable Iron C-Clamp Set, 3-Piece, (1\

• [Clamp Set]: 3pc mini pony C-clamp / G-clamp constructed by iron casting for strength and toughness.
• [Dimensions]: 1-inch c clamp: 1-inch jaw opening & 1-inch throat depth.
• 2-inch c clamp: 2-inch jaw opening & 1-inch throat depth.
• 3-inch c clamp: 3-inch jaw opening & 2-inch throat depth.
• [Characteristics]: Bright Pony Orange Gloss Finish prevents the clamp from corrosion and rust for added longevity. Moveable parts with zinc-plated surface for rust resistance.
• [Comfort Of Use]: Sliding T-handle offers suitable maximum torque in order to reduce hand fatigue, flexible and smooth threaded rods without stick during use.
• [Range Of Application]: Ideal for wide range of applications as crafting, painting, sculpting, masonry, metalwork, photography, DIY and so on.

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

• ...ce. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
• This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a composite material and can be drilled with the proper size hole if desired. Please keep in mind that it takes two Universal Fence Clamps to hold one corner clamp in place..
• Made with a rigid and durable aluminum body, these clamps are made for everyday use. The adjustable 3/8” diameter steel threaded post is angled inward in order to keep your stock firmly against the fence. Other comparable clamps like these are straight and can leave gaps at the bottom you your auxiliary fence which can cause issues when making your cuts..
• Please note: Your auxiliary fence should be at least ¾ of an inch thick in order to accommodate for the 3/8” hole that must be drilled. Half inch thick stock is too narrow and will likely split out the sides when drilled or when pressure is applied by the clamp..

Lisle 34750 Low Profile Fuel Line Disconnect

• Package: 3pcs fuel pipe Pliers kit includes fuel filter Pliers, 80-degree disconnect Pliers,Fuel Filter Calipers Tool, and tool bag for easy storage and carrying..
• The fuel filter caliper is made of carbon steel, with an elastic spring design, which can adjust the opening, saving time and labor. It is compatible with most automobiles, and is suitable for automobile maintenance or fuel filter replacement..
• The 80-degree disconnect pliers are made of carbon steel, and the curved jaws are suitable for operation in narrow spaces, which can avoid hand injuries..
• The hose clamp is suitable for installing automobile water pipes, such as fuel pipes, gasoline pipes and oil pipes..
• Tips: Our products are exquisite in workmanship. If there are any problems in use, please contact us in time and we will deal with them in time..

Atyes Wood Clamps Spreader for Woodworking, with 4-Piece 6 Inch Woodworking Bar Clamps and 4-Piece 4.3 Inch Large Spring Clamps, Hardened Steel Bars, Up to 150lbs, One-Handed Light Duty Design

• Reinforced hardened steel bars to prevent flexing. Thickened pads with soft surface grips firmly and protect the workpiece from any scratches.
• With up to 150 lbs of squeezing force that keeps the workpiece together. Convert from clamp to spreader by moving the jaw to the opposite end of bar.
• Large and soft rubbery handle offers strong grip. This clamp/spreader also applies consistent and precise pressure to keep the workpieces together. Perfect for small projects, and narrow spaces.
• Press the large release button to freely slide the jaws to any position that you want.
• 4-Piece reinforced large spring clamps. Max opening 3 inch, clamping force up to 35lbs, which can hold objects strongly.

2" Exhaust Clamps Narrow Band Muffler Seal Clamp Exhaust Tip, Exhaust Resonator, Exhaust Manifold, Exhaust Flex Pipe, Project Catalytic Converter Repair Stainless Steel 2.0 inch 2PCS

• 【Application】Seal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, Exhaust Muffler Repair Projects..
• 【Function】The narrow band clamp adds the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. Distributes the cla amping force evenly over the entire 360° to prevent leaks and control material distortion. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service..
• 【Easy to Install】Easy and less time consuming to install or remove with one bolt. This exhaust clamp is adjustable, has been tested for strength, and is reusable without damaging the pipes..
• 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

CRAFTSMAN Locking Pliers, 2-Piece Fast Release Set (CMHT81727)

• This set Includes Two Type Heads: Straight and 80 Degree Bent Nose Locking Plier. Max Opening Size : Straight Head - 1-3/4"(45mm), 80 Degree Head - 1-1/8"(30mm), Max Clamping size : 3/4"(20mm)..
• Serrated teeth provide tight grip. Soft Rubber Grip Handles and Fast Release Handle Design..
• Chrome vanadium steel head with heat treated enjoys preminum quality with nickel-plated finish provides rust and corrosion resistance..
• Extra-long reach and angled jaws allow the tool to reach into narrow and strict areas. Perfect for the Professional or DIY lover to grab, hold, clamp, twist, lighten, turn, reach, remove, insert, pick up, and more..
• Suitable for a home garage, professional auto body shop, construction site, or carpenter’s tool box, Use for a variety of jewelry making projects or other small, detail intensive hobby projects..

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

• ...ular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
• 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
• 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
• 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
• BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
• Hex key adjustment screw for adjusting to the correct pressure.
• Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
• Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
• Each wood working clamp comes lightly pre-oiled for rust-resistance (we recommend lubricating between uses).
• EASY STORAGE: 15-inch x 13.75-inch (38.1cm x 34.9cm) canvas roll-up tool pouch that inc....

Tripod Clamp Mount, Lab Stand Holder Cross Clip, for Experiment Laboratory

• ADJUSTABLE TONG OPENING: Because of flexible tong opening, the condensing tube clamp can be used in different specifications of the lab instrument..
• STRONG CLAMPING FORCE: The four-claw lab clamp features strong clamping force, which makes sure that the experiment supplies held by the clamp will not fall..
• FLEXIBLE HANDLE: The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
• FOUR CLAW DESIGN: The beaker clamp adopts four-claw design, which improves its clamping force..
• APPLICATION: The condensing tube clamp is suitable for clamping various lab supplies such as condenser pipe, flask, etc..

Pony Jorgensen 3724 24-Inch Steel Bar Clamp

IRWIN Tools VISE-GRIP Locking Pliers, Fast Release, Curved Jaw with Wire Cutters, 7-Inch (7T)

• IRWIN VISE-GRIP clamp uses Fast Release that is easy to open with a no-trigger release and 1-hand operation.
• Locking C-clamp has wide-opening jaws to provide greater versatility in clamping a variety of shapes.
• Turn screw on the locking clamp to adjust pressure and fit work.

Park Tool PRS-3.3-2 Deluxe Single Arm Repair Stand with 100-3D Micro-Adjust Clamps

• The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp, with narrow clamping jaws and a dual-stage cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size.
• Maximum weight capacity: 120 lbs. (54 kg).
• Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes.
• Clamp jaws are nominally 2.75" (70 mm) wide.
• Clamp height: adjustable from 50" to 62" (128–158 cm).