Categories

Best Nato Strap

SmallRig NATO Rail with Locating Screw for ARRI 48mm BUN2521B

  • 【Install Way】SMALLRIG BUN2521 attaches to other accessory mounts for ARRI by using a 3/8”-16 screw and two locating pins.
  • 【Quick Release】The NATO Rail compatible with NATO clamps or other accessories features NATO clamp for quick release. For example, SMALLRIG Magic Arm 2071, NATO Clamp 1973, NATO Handle 1995/2187..
  • 【Anti-off】The spring-loaded safety pins on both ends prevent your devices from accidentally sliding off..
  • 【Light Weight】The NATO Rail is made of aluminum alloy. Length of 48mm, weighs only 27g..
  • 【Other NATO Rails】If you prefer other NATO Rail mounting options, we have SMALLRIG NATO Rail BUN2468(50mm), NATO Rail BUN2483(70mm), NATO Rail BUN2484(90mm), NATO Rail BUN2486(150mm)..
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • ... clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
  • 【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..
Check Stock

SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072

  • Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
  • Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
  • Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
  • Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check Stock

Nitze Stinger Handle Universal Camera Top Handle with Built-in QR NATO Clamp - PA28-A

  • 【Multiple Mounting Points】Nitze nato camera handle PA28-A is filled with 1/4”-20 threaded holes, 1/4” locating holes, 3/8” ARRI locating holes all around the handle for more accessories expansion..
  • 【Built-in NATO Rail】Camera top handle grip built-in NATO rail on the top of the handle provides convenience for attaching accessories with NATO clamp..
  • 【Built-in QR NATO Clamp】Nato clamp top handle built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
  • 【Cold shoe Adapter】Nato rail top handle equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
  • 【Ergonomic Design】Nitze stinger handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting..
Check Stock

CASIO 10502763 Watch Band for G-STEEL G-SHOCK GST-210 GST-S100 GST-S110 GST-W110

  • Material: Seatbelt weave nylon, 1.4mm thickness..
  • Our Elite Nylon NATO Style Straps, now available for select Casio Compatible G-Shock Watches. Crafted from premium seat belt weave nylon with custom....
  • Included in this purchase: One Elite Nylon NATO strap, one set of Black PVD Compatible G-Shock adapters, two 16mm spring bars to connect the adapters....
  • Hardware: Black PVD adapters, 316L Stainless steel or Black PVD buckle, 2 16mm spring bars, 2 22mm spring bars. Width: 16mm adapter lug width with....
Check Stock

SmallRig Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2926

  • Compatibility: This formfitting camera cage is made for Nikon Z5/Z6/Z7/Z6II/Z7II. And compatible with the HDMI & USB clamp of ID 2927 to protect the HDMI & USB cable head..
  • Key Functions: To ensure the comfort and safety of hand-held shooting, there are interfaces of the shoulder strap and wrist strap of the cage. Built-in cold shoe at the top of the cage makes it easy to install the microphone. And there is a built-in NATO Rail at the left side of the cage, it can be attached to Nato Clamp Handle 2187 for quickly switching..
  • Multiple Mounting Interfaces: With multiple 1/4”-20 thread holes and 3/8”-16 location holes for Arri. Aim to attach accessories such as Magic Arm 2070, Top Handle 2165, Monitor Mount 2903, etc..
  • Stable And Anti-twist: The cage will hold the camera tightly through a 1/4”-20 screw at the base and an M2.5 screw at the side. To keep the camera stable and no shaking..
  • Lens Bayonet Protect: Two threaded holes are reserved at the bottom of the front end of the cage, which is compatible with the FTZ lens adapter ring 2244, to protect the bayonet of the lens..
Check Stock

SMALLRIG Universal Low-Profile Quick Release NATO Rail Safety Rail 50mm/2inches Long with 1/4'' Screws for NATO Handle Camera Cage EVF Mount – BUN2468

  • 【NATO RAIL STANDARD】SMALLRIG BUN2468 is compatible with standard NATO accessories for quick release, such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components.
  • 【THIN & LIGHTWEIGHT】The thickness of SMALLRIG 2468 is 6mm, and the length of it is 50mm. Weighs only 14g, it is made by Aluminum Alloy, very sturdy and lightweight, easy for storage.
  • 【ANTI-OFF DESIGN】SMALLRIG The safety pins on both side prevents your NATO accessories from accidentally sliding off.
  • 【MOUNTING OPTIONS】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc.
  • 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig NATO Clamp 1973, SmallRig Monitor Mount with NATO clamp 2100 and BSE2347, SmallRig Rotating Nato Handle HTN2362, for quick attachment and release.
Check Stock

Luminox FN.3900.26.2 Nato Black Strap

  • Original Luminox nato 3 rings black strap made from high quality heavy nylon material with brushed stainless steel buckle and strap keepers.
  • This is a 22 mm replacement band for Luminox 3000, 3900, 3050, 3950 and 8400 series watches.
  • Brushed stainless steel signature single-tongue buckle, Band has 17 adjustment punch holes, In front: fixed 2x brushed steel loop, On back: fixed 1x....
Check Stock

SmallRig GH5 GH5S Cage for Panasonic Lumix Camera and DMW-XLR1 (Upgraded Version)-CCP2646

  • ...ffectively prevent twist and don’t need worry the camera fall off from your cage..
  • 【BUTTON ACCESSIBLE】This gh5/gh5s cage embraces camera body perfectly and will not block any access to the SD card slot, battery compartment, and all camera controls. Additionally, on the right side of cage is an eyelet for wrist strap for your convenience..
  • 【MOUNTING POINTS】The integrated cold shoe on the top could attach microphone or accessories with cold shoe adapter. It also features NATO rails on both sides for mount NATO accessories such as NATO Clamp to Arri-standard Rosette 2046 and then Wooden Handgrip 1941 for quick release. Cold Shoe 1241 could be mounted on the cage via 1/4’’ and M2.5 threaded holes for microphone, LED lights and so on..
  • 【RELATED RIGS】 There are abundance of 1/4’’ and 3/8’’ threaded holes for accessories, such as QR plates for Manfrotto and Vinten or Quick Release Baseplate Kit 2035. HDMI Lock 1822 could be mounted on the side via 1/4’’ threaded hole for the protect camera HDMI port. Lens Adapter Support 2016 could be mounted at the bottom of cage to support Metabones lens adapter..
Check Stock

CARTERJETT Quick Release Watch Band 22mm - Extra Large Black Nylon NATO Straps Compatible Samsung Gear Galaxy S3 Classic Frontier Moto Pebble Fossil Smartwatch Traditional 22 mm (L/XL Black)

  • NO SHARP EDGES, NOT STIFF OR SCRATCHY — Carterjett durable woven nylon bands are soft, breathable, flexible and water resistant.
  • Inspired by military NATO bands, these rugged watch straps are built tough yet comfortable for all day wearing.
  • SUPER SIZED! Our 22mm L/XL Nylon NATO watch band is recommended for men and women with EXTRA LARGE 8- 10.5” wrists (XL - XXXL) or for ankle wearing. Please measure your wrist before you order. Tuck excess “Nato-style” or trim and heat seal for a custom fit..
  • WHICH WATCH? Compatible with any traditional or smart watch that uses 22mm spring bars such as: Samsung Gear S3 Classic, Frontier, Galaxy (46mm) ::: Fossil Q, Founder 2.0, Marshal, Wander, Crewmaster, Grant, Explorist, Commuter ::: Pebble Time, Time Steel, 2, 2SE ::: LG G Watch, R, Urbane ::: Moto 360 2 (46mm) ::: Huawei Watch 2 Classic.
  • WE CARE ABOUT YOU — Carterjett USA based representatives are here to help with quick response times and hassle-free returns and exchanges. Contact us if there ís any problem and we will fix it!.
  • QUICK CHANGE ARTIST — Simply slide the built-in quick release handle on the back of our strap to pop it in or out. No tools required. Stays latched securely. We have watch straps in multiple colors and styles, so you can chang....
Check Stock

Adapters 16mm and 1 Piece HD Conversion RAF NATO Nylon Watch band Strap Kit For Casio GShock MIL-SHOCK 5600 GWM5610 DW6600 GW6900 2310 G100 Black

  • Material: Seatbelt weave nylon, 1.4mm thickness..
  • Our Elite Nylon NATO Style Straps, now available for select Casio Compatible G-Shock Watches. Crafted from premium seat belt weave nylon with custom....
  • Included in this purchase: One Elite Nylon NATO strap, one set of Black PVD Compatible G-Shock adapters, two 16mm spring bars to connect the adapters....
  • Hardware: Black PVD adapters, 316L Stainless steel or Black PVD buckle, 2 16mm spring bars, 2 22mm spring bars. Width: 16mm adapter lug width with....
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

  • ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
  • ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
  • ▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
  • ▶ What You Get: 1 x Ballhead with 1/4’’ Screw.
Check Stock