Categories

Best Natural Gas Dryer

Samsung LPKIT-3 lp kit, 1, White

  • Liquid propane conversion kit for gas dryers.
  • Converts a natural gas fueled dryer to liquid propane fueled.
  • Widens installation opportunities to more homes.
Check Stock

Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4 Inch by 10 Feet Flexible Clothes Dryer Duct

  • ✅【CHOICE NOT TO BE MISSED】--- The TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers. Duct has a 4-in diameter and extends to 10-ft in length. The package includes 1 x 4-inch by 10-feet proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
  • ✅【USER FRIENDLY】---TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. It is made of quality materials to prevent crushing or other possible damage to the kit. The pipes are flexible and soft, and can be installed quickly and easily, and it can be used when it is connected to the clothes machine. The indoor dryer vent kit is detachable and can be reused after cleaning. Ideal for apartments, condominiums and R.V.s but should not be used with gas clothes dryers..
  • ✅【MADE OF DURABLE MATERIAL】 --- This TDIDVKZW Indoor Dryer Vent Kit is made from durable high quality material to prevent crushing or other possible damage to the kit. Well-tested by the manufacturer, non OEM but quality equal to OEM requirements. High ....
Check Stock

EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)

  • EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
  • EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
  • Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
  • Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
  • The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock

Alpaca Home - 100% Alpaca Wool Dryer Balls - Felted - Set of 3 - Made in The USA - Reusable, Hypo-Allergenic, Chemical Free, All Natural, Decreases Drying Time, Fabric Softener Dryer Sheet Replacement

  • NATURAL & FRIENDLY – The best way to do laundry! No more chemicals building up on your clothes or on your skin from expensive dryer sheets or liquid softeners. Unlike single use dryer sheets that fill up in the trash (and land fill), our alpaca dryer balls help you save money, reduce waste and save energy while softening clothes and eliminating wrinkles. .
  • DO NOT SETTLE FOR SUBSTITUTES – Other balls can be smaller and not as efficient as these optimally sized solid alpaca wool balls. They may be plastic or have a nylon core, or have chemicals all which can out-gas in a hot dryer. Ours are made in the USA, handcrafted with care in Minnesota and hand felted with all natural, fragrance-free soap and ONLY pure alpaca fiber..
  • BE EARTH CONSCIENCE: All-natural, alpaca dryer balls are an environmentally friendly and a cost-effective alternative to the old-fashioned methods for softening clothes. Reuse them hundreds of times, designed for durability they often last several years. Constructed with all natural alpaca fibers that reduce drying time 25-30%, saving electricity and money. Packaged in a reusable muslin bag for easy storage when not in use. Perfect for any eco-conscience gift giver or recipient..
  • HYPOALLERGENIC - Protect your family from potential....
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • ...4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
  • GUARANTEE AND SERVICE- Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on qualit....
Check Stock

Side Vent Kit 3911EZ9131X for LG Dryer, Venting Kit Assembly 383EEL9001B Compatible with Kenmore/sears, Replacement Part AP4438852 Exhaust Out Either Side or Bottom

  • ✔ [Compatible with Most Models] This dryer side vent kit number 3911EZ9131X (also called 383EEL9001B) compatible with 408 models of LG dryer, and 144 models of Ken-more / Sears dryer. Please refer to Figure 3 for specific models. For use with LG gas dryer model numbers beginning with the prefixes (CDE, CDG, DLA, DLE, DLEX, DLEY, DLG, DLGX, DLGY). For use with Ken-more / Sears gas dryer model numbers beginning with the prefixes (796.61, 796.69, 796.71, 796.79, 796.80, 796.81, 796.82, 796.88, 796.90, 796.91, 796.92, 796.98). There are so many matching models that you must make sure that your dryer model matches this one before purchasing. This is very important important important..
  • ✔ [Venting Kit Assembly Included] : 2 X Straight Tubes, 1 X 90 Degree Elbow, 1 X Cover Plate, 1X Mounting Screw, 1 X Instruction Sheet, 1 X Adhesive Aluminum Foil Tape. Solving the problem that gas dryers cannot be vented on the right left and bottom side. .
  • ✔ [Simple Install by Yourself] This dryer venting kit installation is so simple. You can replace it by yourself with simple tools and have a perfect solution in just 20 minutes. Restoring the normally use of your drye....
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock

338906 Dryer Flame Sensor & 279834 Gas Valve Ignition Solenoid Coil Kit & 3392519 Thermal Fuse by BlueStars – Exact Fit For Whirlpool Maytag Kenmore Dryers - Replaces WP338906 303377 DC32-00008A

  • ✅ FULL KIT SET: 1 x 338906 Dryer Flame Sensor, 1 x 279834 Dryer Gas Valve Ignition Solenoid Coil Kit, 1 x 3392519 Dryer Thermal Fuse.
  • ✅ PREMIUM QUALITY: The replacement parts are made from durable high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. The 338906 Dryer Flame Sensor senses heat from the igniter to monitor if it is hot enough to ignite gas to light the burner. Once the igniter is hot enough it will open the valve and allow gas to flow. This is a safety mechanism to prevent dangerous levels of gas from building up.
  • ✅ HIGH COMPATIBILITY: It is made exactly fit for most top name brands (Kenmore, Whirlpool, Maytag, Amana, Roper). This kit fixes the following symptoms: No heat or not enough heat | Takes too long to dry | Shuts off too soon | Will not start | Timer will not advance.
  • ✅ REPLACEMENT PART NUMBER: ► 338906 replaces: 14205529, 14210083, 14218928, 303377, WP338906, 35001096, 56231, 63-5013, AP6008294, DC32-00008A, WP338906VP, Y303377, Y56231, PS11741429, etc. ► 279834 replaces: 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834VP, 306105, 306106, 58804A, 58804B, 63-6614, 63-6615, 694539, 694540, AP3094251, etc.....
Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • ...4in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only wi....
Check Stock

GE WE25X217 Liquid Propane Conversion Kit for GE Dryers

  • Converts a natural gas fueled dryer to liquid propane fueled.
  • Widens installation opportunities to more homes.
Check Stock

General Electric WE25X217 Dryer Conversion Kit- Natural Gas to Liquid Propane

  • This conversion kit changes the dryer from natural gas to liquid propane..
Check Stock