Categories

Best Natural Looking Wood Filament

NOVAMAKER PLA Wood 3D Printer Filament 1.75mm with Cleaning Filament, 1kg(2.2lbs) Spool , Dimensional Accuracy +/- 0.03 mm, Dark Wood PLA

  • 【1kg Spool Wood & 20g Cleaning Filament】 NOVAMAKER Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. 1kg Wood filament combines real wood fibers, meeting your demands for printing projects of functional parts with wooden texture..
  • 【Less Tangle】 Full mechanical winding and strict manual examination, which guarantee the PLA filaments tidy,and solves the problem of printing interruption caused by the knotting of the wire.Once you have completely untangled the knot, you need to make sure you use a clip pass the filament through a hole in the side of the spool..
  • 【Dimensional Accuracy & Consistenc】This 1.75mm diameter PLA filament has been made with strict production standards, so novamaker can assure that you that its size remains consistent all throughout.And solves the problem of printing interruption caused by the knotting of the filament.Works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
  • 【Clog-Free, Bubble-Free】Complete drying for 24 hours before packaging.Novamaker use vacuum-sealed packaging bag for packaging 3d printer filament to keep the humidity percentage at a minimum and controlled. To avoid clogging of the nozzles and bubbling..
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg Spool 1.75 mm Green

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended....
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with....
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a....
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection....
Check Stock

iSANMATE Wood Filament 1.75mm, PLA+ Wood Filament 1.75mm, 3D Printer Filament 1kg/Spool (20% Wood Powder+80% PLA)

  • 【Parameter】-iSANMATE Wood PLA+ Filament Print Temperature：190℃-225℃. iSANMATE PLA+ filament dimensional: 1.75mm,accuracy +/- 0.03mm, 1KG (2.2LBS)..
  • 【Wood PLA+】- iSANMATE Wood Filament is made up of 20% wood flour and 80% PLA+ with wood color and texture.Able to make products with woody touch.
  • 【High Quality】- iSANMATE Wood PLA + filament has superb layer bonding, and strength and toughness are greater than conventional PLA filament. Easy to use.
  • 【Spool Size】- Spool Diameter:197mm(7.76").
  • 64mm( 2.52") - Spool Hub Hole Diameter: 57mm(2.24")..
  • 【100% Satisfactory Service】-1 year warranty. Provide fast and efficient technical solutions when you have any printing problems. With 24 hours guaranteed reply..
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament Dimensional Accuracy +/- 0.03 mm 1 kg Spool 1.75 mm Black Dark Black

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended....
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with....
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a....
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection....
Check Stock

ERYONE Rainbow PLA Filament 1.75mm Filament for 3D Printer 1kg /Spool, Steampunk Rainbow

  • [Rainbow Steampunk Filament Makes Vibrant Metallic prints]Rainbow steampunk finish PLA filament begins with a corroded brass (green) base color transforming through to copper and gold .No hardened nozzle is needed to print with this filament. Perfect for rustic and metal looking props or prints ..
  • [Large Size Model ,Marvelous Metallic Steampunk]As per color change it’s about 13-15m, bigger size prints will show up more of the amazing colour changes. Small prints may only stay one color due to the nature of the filament..
  • [No clogging, Non Toxic | Professional Packaging, Vacuumed Sealed]+/-0.05mm tolerance . Low warping to ensure consistent feeding and stable prints, no clogging, extremely high success rate. 100% with virgin natural materials, biodegradable and Eco-friendly, no Harm to user and environment. Ideal for indoor printing. Professional package by a Sealed Vacuum bag with a desiccant bag to keep it dry and free off dust and foreign particles.
  • [High Compatibility]- Compatible with 3D Printers that use 1.75MM filament, such as: Prusa, Makerbot, etc. Our filaments have been tested on various brands of 3D printer in the market and with positive customers' feedback..
  • [100% Money Back Guarantee] Eryone guarantees your purchase and provides a lifeti....
Check Stock

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

Creality Ender 3 Pro DIY 3D Printer with Removable Magnetic Bed and UL Certified Power Supply 8.6

  • Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

SUNLU Wood PLA 3D Printer Filament, 1.75 PLA Filament Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75mm Wood fibers (Real Wood)

  • ① 【20% WOOD Fibers】SUNLU Upgrade Spool Wood PLA Filament is mixture of 20% recycle wood with polymer,Gives prints surface of wood color and texture. The print even smells like wood.SUNLU 1kg Wood filament combines real wood fibers, To satisfy your demands for printing projects of functional parts with wooden texture.
  • ②【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Wood PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • ③【Clog-Free, Bubble-Free & Easy-to-use】SUNLU WOOD PLA 3D Printer Filament is completely mechanically wound, with sturdy fixing holes, 100% tangled free, and manual inspection one by one. Which has an advantage of high purity with low shrinkage. It enables you to have a smooth and stable printing process, with excellent quality prints..
  • ④【Wide Compatibility】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
  • Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Check Stock

Snapmaker Wood Filament 3D Printer Filament 1.75mm, 750g Spool (1.65 lbs) - Dimensional Accuracy +/- 0.03mm, Fit Most FDM Printer Wood PLA

  • Dimensional Accuracy and Consistency: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker wood filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker Wood PLA filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wood-like, Perform Better and Less Weight: Snapmaker Wood PLA Filament is PLA-based and uses a special foaming technology, which gives it a stable foam structure to mimic actual wood. It enables you to print whatever you want with wood color and texture, and outperforms traditional wood composite in terms of printing quality.
  • Wood-like density makes the filament lighter than traditional PLA filaments and fits a wide range of applications..
  • Wide Compatibility: Snapmaker Wood filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge,....
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Granite

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • Design complex, medieval castles and replicas of historic art sculptures with a texture that mimics from granite, limestone and marble.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings.
  • Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed.
  • PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price.
  • From art and design, to prototypes and m....
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Gray

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • Design complex, medieval castles and replicas of historic art sculptures with a texture that mimics from granite, limestone and marble.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings.
  • Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed.
  • PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price.
  • From art and design, to prototypes and m....
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • Design complex, medieval castles and replicas of historic art sculptures with a texture that mimics from granite, limestone and marble.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings.
  • Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed.
  • PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price.
  • From art and design, to prototypes and m....
Check Stock

HATCHBOX Magic Stone PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Brick Red

  • FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F).
  • NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX.
  • Design complex, medieval castles and replicas of historic art sculptures with a texture that mimics from granite, limestone and marble.
  • BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings.
  • Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
  • TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed.
  • PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
  • WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price.
  • From art and design, to prototypes and m....
Check Stock