Categories

Best Naturally High In Cobalt

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

Ernie Ball Regular Slinky Cobalt Electric Guitar Strings 3-pack 10-46 Gauge P03721

  • 3 individual sets of Regular Slinky Cobalt electric guitar strings.
  • Cobalt produces a stronger magnetic relationship between pickups and strings, resulting in increased output.
  • Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
  • Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
  • Made in California, USA with the finest and freshest materials.
Check Stock

TEMO M35 Cobalt Spiral Flute Step Drill 12 Size From 3/16 Inch To 7/8 Inch 1/4 Inch Hex Shank

  • M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm).
  • 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use..
  • double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

5mm Cobalt Drill Bit Set, M35 Twist HSS Drill Bits Straight Shank, 5mm High Speed Steel Drill Bits for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【10PCS 5mm Cobalt Drill Bits】10pcs -(Dia 5mm) x (Length 86mm) metal drill bits. This drill fits most power drills on the market today and comes with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed ​​Steel】Made of M35 Cobalt Steel, Cobalt is added to form a hardened alloy, measuring Rockwell hardness up to 67, faster cutting speed, longer service life, up to twelve times more drill bits compared to ordinary high speed steel. HSS bit set, harder than the 4241 HSS used in other similar bit sets. These bits also contain 5% cobalt for improved wear resistance and durability..
  • 【Full Grinding Process and 135° Split Point】Fully ground helical flute design removes particles quickly, reducing friction and heat for faster, cooler drilling performance. The 135° straight shank split point prevents walking, making drilling more precise and faster..
  • 【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
  • 【Quality Service】If you have any questions about ....
Check Stock

BOSCH CO14B 14 Pc. Cobalt M42 Drill Bit Set

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

BOSCH CO21B 21 Pc. Cobalt M42 Drill Bit Set

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

Topline Cutting Tools No. 7 Drill Bits Cobalt M42 4-Pk

  • Cobalt M42 drill bit – provides upgraded M42 Cobalt jobber-length bits designed for durability, high heat resistance and Hardened surface for stainless steel, cast iron, titanium, light-gauge metal and aluminum.
  • Enhanced M42 alloy material – contains 8% Cobalt alloy that delivers 10x life vs. Standard bits.
  • High-heat resistant bits – withstand high-temperature applications for extended periods of time.
  • Thick web-helix design – provides additional stability in tough applications.Case Type:Plastic.
  • Surface-hardened tip – penetrates tough abrasive materials.
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock