Categories

Best Nc Cut Off

10pcs RC-33 NC Recessed Wired Window Door Contact Sensor Alarm Magnetic Reed Switch White

  • RC-33 NC Recessed Wired Window Door Contact Sensor Alarm Magnetic Reed Switch.
  • Magnet near together, the switch is closed.And the switch and magnet is separate, the switch is open..
  • NC means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separate, the circuit is not conductive ( light off )..
  • NC means Normally Closed:When the magnet together, the circuit is conductive( light on ).
  • Each Size(Approx): 17 x 10.6mm / 0.67 x 0.42-inch (H*D) Cable Length(Each): 25cm / 9.8-inch.
Check Stock

Ulincos U19C2D 19mm Latching Pushbutton Switch 2NO2NC DPDT Black with 12V Blue LED

  • 2NO2NC switch: You can use it as 1NO switch or 1NC switch.
  • Also it can be a 2NO or 2NC switch, control 2 circuits at the same time..
  • The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it. You can find the wiring....
  • Come with the wiring harness, which makes switch installation a breeze.
  • Can be use as a switch for various additional electric equipment inside & outside the car.(Such as critical lights, chassis lamp, fog lamps, dome....
Check Stock

DWL Key Blank with Out Transponder Chip for Motorcycles Repalcement Key duke200 250 300 rc 390 KTM250 EX250 KTM990 KTM690 KTM125 (Black)

  • Blank Key Uncut Fits: CB400 CB1300 VTEC CBR 600RR CBR1000RR VTR1000 CB400 CB1300 VTEC CBR 600RR CBR1000RR VTR1000 CTX700ND CTX700D CTX700N CTX700 NC700XD NC700X CBR500RA CBR500R CB500XA CB500X CB500FA CB500F CB500XA CB500X CB500FA CB500F NC700XD NC700X.
  • Worth to buy, It just cost a fraction than the OEM but it work to match the original in form and function.
  • 3 Pcs blank uncut metal key This key is without Chip, and ready to be cut by Locksmith or at dealership.
  • The Blank key is compatible with the majority of bikes. due to more vehicles and years. Please compare your keys with the product before purchase. If you have any questions, please feel free to contact us.
  • The metal part of the key embryo is due to batch problems. Sometimes brass is sometimes silver. It does not affect the use..
Check Stock

Ulincos U19C1D 19mm Latching Pushbutton Switch 2NO2NC DPDT Black with 12V Blue Power Symbol LED

  • 2NO2NC switch: You can use it as 1NO switch or 1NC switch.
  • Also it can be a 2NO or 2NC switch, control 2 circuits at the same time..
  • The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it. You can find the wiring....
  • Come with the wiring harness, which makes switch installation a breeze.
  • Can be use as a switch for various additional electric equipment inside & outside the car.(Such as critical lights, chassis lamp, fog lamps, dome....
Check Stock

CTA Tools 8240 Universal 53-Piece Rethreading Set RED

  • Use for thread repair ONLY, it does NOT cut new threads!.
  • Includes thread file #8231 and #8233 plus the following color-coded Taps and Dies:.
  • Tap & Die Sets: Metric - 6 x 1.00, 8 x 1.50, 10 x 1.00, 10 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.25, 12 x 1.50, 12 x 1.75, 14 x 1.50mm NC-USS - 1/4" -....
  • Dies (only) Metric - 6 x 1.25, 7 x 1.00, 8 x 1.00mm NC-USS - 5/8" - 11 NF-SAE - 5/8" - 18.
Check Stock

UHPPOTE Wired Shutter Roller Magnetic Overhead Door Contact Output NC/NO with Bracket

  • This Contact Works with Any Access Control or Burglar Alarm System Available.
  • Great for use in family and factory window, door. etc..
  • NO means Normally Open: when the magnet separate, the circuit is conductive( light on ).
  • When the magnet together, the circuit is not conductive (light off).
  • NC means Normally Closed: When the magnet together, the circuit is conductive (light on).
  • When the magnet separate, the circuit is not conductive (light off).
Check Stock

IRWIN Tap And Die Set Machine Screw/SAE/Metric 76-Piece 26376

  • This tap and die set is great for auto repair and machinery.
  • High-carbon steel taps and dies provide durability.
  • Machine screws: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC, 10 - 32 NF and 12 - 24 NC.
  • Fractional: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC, 5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC and 1/2" 20 NF.
  • Metric: 5/8" hexagon: 3mm - 0.5, 4mm - 0.7, 4mm - 0.75, 5mm - 0.8, 5mm - 0.9 and 6mm - 1.0.
Check Stock

TOPEC Tap Bit Set, 3-in-1 HSS Titanium Coated Drill Tap Combination for Titanium Coated Drill Tap Combination, 13 PCS SAE/Metric threading tap drill bit set with 1/4 Inch Hex Shank, and Quick-Change Adapter

  • ...mprove working efficiency. Deepening the chip flute helps to remove chips and debris on the tap, reducing friction and heat, thereby achieving a faster and cooler drilling process..
  • ❤【PREMIUM MATERIAL】These high-quality taps are made of high-speed steel(HSS) and have high hardness to achieve sharpness, fast execution and maintain strength and efficiency. It can be applied to all wood, copper, iron and part of thin stainless steel is also applicable. The surface is treated with titanium alloy to improve the cutting performance and wear resistance of the drill , and extending the service life..
  • ❤【 HIGH VERSATILITY&CONVENIENCE】The product portfolio includes SAE and metric sizes, can meet your various need. Each tap drill is engraved with its size, you can choose the accurate bit without any difficulty.The convenient 1/4" (6.35mm) hex shank has a tapered end to prevent excesssive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a portable storage case you can carry and keep the drill neat and tidy..
  • ❤【WIDE APPLICATIONS】These tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Hex Shank quick change adapter（with lock function....
Check Stock

Tork P47 Pair standard screw-on type trippers for Tork Timer 1101, Tork Timer 1102, Tork Timer 1103, Tork Timer 1104, Tork Timer 7000 Series and Tork Timer 1800 Series

  • Tork P-47 Trippers for T1100 (1100) and T7000 (7000) Series Timers set of 1 on and 1 off.
  • Used on the following Models: 1101 1101-N 1101-NC 1101-O 1101-M 1101-M-IAP 1101-7 1102 1102-N 1102-O 1102-M 1103 1103-N 1103-NC 1103-O 1103-M 1104 1104-N 1104-NC 1104-O 1104-M 1104-M-IAP.
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

RMT-D171A RMTD171A Replace Remote Control fit for Sony CD DVD Player DVP-NS775V DVP-NS425 DVP-NC610 DVP-NC615 DVP-NC625 DVP-NC655 DVP-NC675 DVP-NC80 DVP-NC875 DVP-NS305 DVP-NS315 DVP-NS325 DVP-NS415

  • AIDITIYMI RMT-D171A RMTD171A Replacement Remote Control fits for Sony CD DVD Player.
  • No programming or pairing needed, just install new AAA alkaline batteries, then it works.
  • Operates for Sony DVD Player model DVP-NS775V DVP-F25 DVP-NC610 DVP-NC615 DVP-NC615B DVP-NC615S DVP-NC625 DVP-NC655 DVP-NC655P DVP-NC655PB DVP-NC655PS....
  • DVP-NC675P DVP-NC675PB DVP-NC675PS DVP-NC685V DVP-NC80 DVP-NC80V DVP-NC80V/B DVP-NS315S DVP-NS325 DVP-NS325B DVP-NS415 DVP-NS425 DVP-NS425P DVP-NS501....
Check Stock

MIBRO 301360BLUE Tap Die and Drill SAE Set 26 Pieces

  • Titanium coated for sharper, more precise cuts.
  • Made to exact specifications from long lasting tool steel.
  • Sets include prcise drills to match the taps.
  • Includes: 6-32 NC, 8-32 NC, 10-24 NC, 1/4 inch-20 NC, 5/16 inch-18 NC, 3/8 inch-16 NC, 7/16 inch-14 NC, 10-32 NF.
  • Also includes adjustable tap wrench and hex die holder.
Check Stock

1\ NPT Pipe Carbon Hex Rethreading Die

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock