Best Negative Insert

Katzco Red Precision Magnetizer and Demagnetizer - 3 Pack - for Screwdrivers, Screws, Drill Bits, Sockets, Nuts, Bolts, Nails, Drivers, Wrenches, Tweezers, and Other Steel Tools

• EASY TO USE- No batteries or electrical required.To magnetize a tool, simply slide it through the center hole. To de-magnetize a tool, slide it through the side slots. If you need to work with electronic parts requiring demagnetized tools, just insert the screwdriver tip in the negative terminal cavity.To magnetize the screwdriver tip, insert it in the positive terminal cavity..
• PORTABLE- The lightweight and compact design of this magnetizer/demagnetizer makes it amazingly portable to fit in tool bags and super easy to store in workshops/tool sheds. Since it does not require battery, it is even more portable and can be deployed for used at any time..
• CONVENIENT- Converts any tool blade to a magnetic retriever of screws, nuts and metallic particles. Perfect for demagnetizing tweezers, screwdrivers and other small tools. Will also magnetize bigger sized tools.Minimize tools slippi....

HHIP 6062-5003 T/NT-3R C5 Coated Right Hand Threading Carbide Insert, 0.098\ Depth of Cut

• Grade C5 /TIC-65 coated insert which is the same as the Kennametal KC810, KC850, KC950, KC730 grades.
• Completely interchangeable with the Kennametal Top Notch and the Teledyne Firth Notch systems.

OSCARBIDE 5/8'' x 8''Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304(CCMT32.5) Right-Hand Sclcr Boring Bar

• Negative 5 degree end or side cutting edge angle for 80 degree CNMG 43X insert.

HHIP 6062-3125 T/NG-3125L C5 Coated Left Hand Grooving Carbide Insert, 0.075\ Depth of Cut, 0.125\ Groove Width

• Grade C5 /TIC-65 coated insert which is the same as the Kennametal KC810, KC850, KC950, KC730 grades.
• Completely interchangeable with the Kennametal TopNotch and the Teledyne Firth Notch systems.

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

• Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
• Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
• Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
• Bar hardness approximately 45HRC. Extreme fine gloss finish.
• Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

25W Powerful LED Flashlight 100000 High Lumens Bright Rechargeable Flashlights Handheld Tactical Flashlights for Emergencies and Camping Zoomable Waterproof Flash Light with 5000mAh Battery

• 【100000 High Lumens Super Bright Flashlight】Powerful 25W flash lights powered upgraded XHP70.2 LED cree, supports brightest output of 100000....
• Please confirm the positive and negative pole before use.The convex end faces forward, and the flat end faces the tail end.【Zoomable Flashlights....
• Attention Please! Insert the battery in the POSITIVE INSIDE and NEGATIVE OUTSIDE directions. If in the INCORRECT direction, it will CAUSE DAMAGE to....
• 【USB Rechargeable Flashlights Powered New Upgrade Battery】The brightest flashlight is built-in overcharge , over discharge and overcurrent....
• 【Widely Application of This LED Flashlight】This flash lights powered led is very suitable for outdoor activities such as camping, hiking, fishing,....

AMMCO 6914-10 Negative Rake Carbide Insert 10 Pack

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

• Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

GBJ MWLNR 1616H08 5/8\ Lathe Turning Holder + 10PCS WNMG431 Carbide Turning inserts, SER1212H16 SER 1/2\ External Threading Holder +10pcs 16ER 3/8\ AG60 Threading inserts

• MTJNR 12-3C Right Hand Turning Tool Holder,3/4”Shank ,5” Length ,negative 3 degree lead angle..
• Turning holder is made of HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Indexable Turning Holders use with TNMG, TNMA, or TNMM-32 style negative inserts.
• MTJNR 12-3C Lathe Tool Holder,93 degree,clanping& Tool style for turning.
• MTJNR 12-3C indexable tool holder for external contouring, profiling and facing from light roughing to finishing.

allsun Car Memory Data Saver OBD2 Automotive Emergency Power Supply Battery Adapter Protection Connector Memory Saver Adapter Cable Keep Memory Alive for Cars 2 Alligator Clips Cigarette Lighter

• Car Memory Saver OBD2, has red clip link back-up battery positive, negative black negative.Prevents electronic memory loss when disconnecting a vehicle's battery preserves vehicle codes and electronic presets..
• Car Memory Keeper, Alligator clip car charger, you can use this Car Data Saver to keep your car's computer powered through the OBD-II port or the cigarette lighter socket on the car while you replace the car's storage battery. The Car Data Saver needs an additional 12V storage battery as a temporary power source. It is a very useful tool for car service..
• Memory Saver Automotive, the Emergency Power Interface with super long 6.5 ft (2meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
• Memory Saver Adapter Cable,as our device with 2 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery..

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

• Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

Wolverine Titan 8-in-1 20MP High Resolution Film to Digital Converter with 4.3\ Screen and HDMI Output, Worldwide Voltage 110V/240V AC Adapter & 32GB SD Card (Bundle) (Yellow)

• 1 x F2D Titan 8-in-1 20MP High Resolution Film to Digital Converter ( B017H11VI4 )- 135 mm Negative Film Adpater - 135 mm Slide Adpater - 110/APS Negative Film Insert - 110 Silde Instert - MultiVoltage 110V/240V AC Adapter USB Power Adapter & Cable (Simply add your countries type plug adapter! Not Included) - Cleaning Brush - English User Manual.
• Convert 35mm, 127 (1.5x1. 5"), 126Kpk, 110, Advantex APS slides & negatives into digital in three seconds.
• SanDisk Secure Digital High Capacity (SDHC) Memory Card features an impressive 32 GB capacity to hold all your important pictures, videos, music, data files and more..

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

• Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
• Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
• Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
• CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
• Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.