Categories

Best Network Serial Server

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega..
  • This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software s....
Check Stock

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

Lantronix Xpress Dr-Iap Industrial Device Server W/Installable Indust Protocols Xsdrin-03

  • Socket modes: TCP server/TCP client/UDP/Real COM.
  • Configure via Telnet/Web/Windows utility.
Check Stock

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

  • Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
  • Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
  • Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
  • 1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
  • Configure Via Web Browser or Virtual Com Software Interface.
  • Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
  • What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..
Check Stock

2-in-1 Wireless USB Print Server - USB Printer Network Adapter

  • This 2-in-1 wireless/wired printer network adapter allows any networked computer to access the USB printer connected with this print server device..
  • This USB print server offers the ability to place your printer anywhere as long as this print server can stay connected with Wi-Fi network or hotspot so other computers at home or in the office can access the same USB printer through the network..
  • Users may change the IP address of this printer server by using smartphone, tablet or computer to connect into the hotspot of this printer server and change the default IP if needed..
  • Printer driver needs to be installed on each networked computer in order to gain access of the printer connected via this printer server. After connecting the USB server box to a wired or wireless router with power supply, users just proceed with same steps like adding a network printer in computer OS as the screenshots shown below..
  • This USB print server box fully supports all Windows OS including Win10, Win8.1/Win8, Win7, Vista, and Win XP. This usb printer sharing device is fully compatible with all printers including laser printers, thermal label printers, barcode printers and so on..
Check Stock

Sysracks 22U Server Rack Locking Cabinet Network Enclosure for Server AV Networking Computer and Other IT Equipment - 35-inch Depth

  • BUILD AN IT PROJECT YOU LOVE - An IT Enclosure is more than just a steel box. This Solid locking server rack cabinet adds security and stability to your network / computer / AV / server / IT / audio equipment it also gives a stylish look you living / working place.
  • WHAT'S INCLUIDED - This rolling server / network equipment rack is supplied with: 8-Outlet rack mount power strip with surge protector, Sturdy Casters Wheels / Cooling Fan / cage nuts screws / server rack shelf / 2 X Dust Tight Cable Entries / Lockable Doors / Side panels and other HQ accessories - Over $90 Value.
  • TECHNICAL PARAMETERS - 22U 35-inch deep server rack / Dimensions: 22U 24”X35”X43” – 35” Depth / Rolled steel profile / Frame / server rack rails - 1.5mm.
  • other components (inc rack mount shelf) - 1.0-1.2mm / Color - Black / Application - wall mount network rack / standing server rack / home theater cabinet / datacenter rack / rolling network rack /.
  • EASY TO SET UP AND USE - The computer rack Is Easy Assemble and Set Up due To Welded Frame Design and Quality Hardware / Video Guide and PDF Instructions Provided / No special tools or skills necessary /.
  • SATISFACTION GUARANTEE - We aim to provide each customer with the highest standard of CS. Quick Customer Service Support. 2 Y....
Check Stock

StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server - Windows 10 - LPR - LAN USB Print Server Adapter (PM1115U2)

  • NEW FIRMWARE UPDATe AVAILABLE: To enhance the performance of your 10/100Mbps networking USB print server we suggest downloading the latest version of the product firmware to improve stability in varied network environments..
  • SHARE A PRINTER: Share a USB printer w/ multiple users over an Ethernet network. The print server has 10Base-T/100Base-TX auto-sensing to ensure a reliable connection, letting you print from any network computer, across the office or over the Internet..
  • GREAT FOR ANY ENVIRONMENT: This USB print server adapter is the perfect printing solution. It's ideal for home or small office applications, and government and educational institutions that require shared printing capabilities..
  • BROAD COMPATIBILITY: This USB to Ethernet print server is USB 2.0 compliant, and works w/ Mac & Windows, including Windows 10. The print adapter also supports LPR network printing and Bonjour Print Services to provide ultimate compatibility..
  • PRINT FROM ANYWHERe: Print from any computer connected to the LAN. This print server doesnt require a wired connection to a computer, however you must connect the server to your networking device (eg. router) w/ the included RJ45 network cable..
Check Stock

Orange Pi Zero 512MB SDRAM AllWinner H3 Quad Core, Open-Source, Android 4.4, Ubuntu, Debian, Single Board Computer (Zero 512+White case+OTG Power Supply)

  • Orange Pi Zero uses Allwinner quad-core A7 high-performance processor Allwinner H3, integrated Ethernet, 100M onboard network port, onboard storage, USB OTG power supply, USB2.0 port, etc. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
  • Orange Pi Zero open source development board integrates on-board network, on-board storage, LED indicators, low-level peripherals, and is compatible with Raspberry Pi GPIO ports, and has a unique debugging serial port, etc..
  • 512MB DDR3, Onboard Network. One USB 2.0 HOST, one USB 2.0 OTG USB OTG can supply power.
  • Include: Orange Pi Zero 512 Single Board Computer+White Case+OTG Power Supply.
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
  • Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon servic.
Check Stock

WORK[etc] 8 Users

  • One additional SBS 2008 User CAL (Client Access License) for accessing a Windows Small Business Server 2008 network.
  • Purchase incremental CALs for each user or device that is accessing the Windows SBS network.
  • With user CALs, you acquire a CAL for individuals who are given named access to your server--licensed users can access the server from any device.
  • Perfect for an organization that has many roaming employees who need access to the corporate network from mobile devices or employees who use multiple devices to access the network.
  • Reallocate a user CAL if a reassignment is permanent, or temporarily reassign a user CAL if the user is on leave or the device is disabled.
Check Stock

StarTech.com StarTech.com 1-Port 10/100 Mbps Parallel Network Print Server - Fast Centronics Ethernet Printer Server Adapter - Windows 10 (PM1115P2)

  • 10BASE-T/100BASE-TX: The Ethernet to Parallel Network Print Server lets you convert a standard parallel printer into a shared network printer over a 10/100Mbps network..
  • EASY INSTALLATION: The parallel print server can have you up and running in minutes, using either a remote web-based interface or Windows based installation wizard..
  • BROAD COMPATIBILITY: This parallel print server works w/ Mac & Windows, including Windows 10. The print adapter also supports Simple Network Management Protocol (SNMP) for remote monitoring..
  • PRINT FROM ANYWHERe: This compact, lightweight Ethernet print server connects directly to the Centronics port on your printer, for a discreet solution that doesn't require a cable.
  • simply connect the device to the network using an RJ45 cable..
Check Stock

Rosewill Server Rack, 19 Inch Desktop Open Frame Server Desk Rack Free Standing

  • Rosewill 25U 4 post Server racks are able to provide the best way to store your server network, telecommunications equipment and perfect compatible with server accessories such as server shelf, cable managements..
  • Rosewill 4 post adjustable server rack cabinet allows users to adjust depth of horizontal rails from 22 to 40 inches by themselves which means user never got stuck with different server cases, server rails and others..
  • The 4 post server rack comes with adjustable rails which offer the flexibility to customers who owns different servers. This open frame server rack (25U) is suitable for all rack mount server chassis, network switches, routers and etc..
  • The server rack posts have easy-to-read Unit (U) and depth adjustment markings for DIY builders and IT staff to recogonize and the convenient cable manager with hooks gives a organized environment for data centers..
  • With RoHS Compliance, Rosewill adjustable open frame rack guarantees our rackmount products and materials to be eco-friendly for our customers and the environment..
Check Stock

DollaTek SIMCOM SIM900 GSM GPRS Quad-Band Modules 2G Development Shield Board for R3 Mega with Antenna

  • Quad-Band 850/900/1800/1900 MHz - could work on GSM networks in all countries around the world, work with Uno Mega.
  • Embedded TCP / UDP stack - allows you to upload data to a Web server | RTC supported | selectable serial port | Jac speakers and headphones.
  • Note: This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • ...e serial port is perfectly compatible. The TTL serial port is compatible with 3.3 and 5V microcontrollers.Speaker and Headphone jacks..
  • The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud rate by default).Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data to a web server.RTC supported.Selectable serial port.Low power consumption - 1.5mA(sleep mode)..
Check Stock