Categories

Best New Arduino Development Ebooks

Hosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos

  • It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
  • Compatible with Arduino IDE and WeMos D1 Mini..
  • 4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
  • 11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
  • 1 analog input (3.2V max input). Micro USB connection..
  • D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock

waveshare Universal e-Paper Driver Board with WiFi/Bluetooth SoC ESP32 Onboard Supports Various SPI Interface e-Ink Raw Display Panels Supports Arduino Development

  • This is a universal driver board for e-Paper raw panels, thanks to the dual wireless features - WiFi & Bluetooth - it is easy to display images from PC / smart phone via WiFi or Bluetooth..
  • Furthermore, it can also be used for Arduino development, just like any other normal Arduino board..
  • Onboard ESP32, supports Arduino development.
  • Provides Android APP, allows to refresh display content via Bluetooth EDR.Provides HTML host code, allows to refresh display content via remote webpage, suit for Internet applications.
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image.Supports popular image formats: BMP, JPEG, GIF, PNG, etc..
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3, ESP32 WiFi+Bluetooth and ESP8266 NodeMCU development platforms.
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users.
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield.
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly.
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable orga....
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

ELEGOO UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

  • The cheapest and most basic electronic components kit for Arduino beginner.
  • Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them..
  • With the newest UNO R3 development board + USB Cable and all the basic components..
  • Nice package in the box with clear listing and CD..
  • 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

Makeronics Microcontroller Board and RAB 7-in-1 Breadboard Holder with USB Cable Compatible with UNO R3 Board ATmega328P and Arduino IDE

  • RAB 7-in-1 breadboard holder is suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project..
  • Control using ATMEL ATMEGA328P chip(the same with Arduino UNO R3).
  • 100% compatible with the Arduino IDE and RoHS Compliant.
  • Powered via the USB cable or power it with an AC-to-DC adapter or battery to..
Check Stock

DollaTek GY-30 BH1750FVI Digital Light Intensity Sensor Module I2C Raspberry Pi

  • ANMBEST Pulsesensor Pulse Heart Rate Sensor is a plug-and-play heart-rate sensor for Arduino and Arduino compatibles..
  • Pulse Sensor adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. The Pulse Sensor works with either a 3V or 5V Arduino..
  • The sensor can be worn on the finger or earlobe..
  • Supported development boards are Uno R3, mega2560, leonardo, 51 series, msp430 series, KL25Z. s..
  • NOTE: This product is NOT a professional medical device and should not be used to diagnose or treat medical conditions..
Check Stock