Categories

Best New Firmware Release

Official Creality Ender 3 V2 3D Printer with Upgraded Silent Motherboard and Carborundum Glass Platform,MeanWell Power Supply

  • 【32-bit Silent Mother Board 】4.2.2 Mainboard with Silent TMC2208 Stepper Drivers,You will Bnefit from a Very Quiet Working Environment During Your....
  • 【4.3 inch HD Color Screen】Creality Ender 3 V2 Equipped with a 4.3 inch HD Color Screen, Brand new operation UI system greatly improve user....
  • 【MeanWell Power Supply】Ender 3 v2 Meeting all the Needs of Fast Heating and Long-Time Printing. the Power Supply is Concealed in the....
  • 【Carborundum Glass Platform】With Better Adherence, and The Model Can be Easier Removed but Not Damage the Models.
  • 【New Features, New Firmware】 Update at any time,Ender 3 v2 firmware involves using a BIN file on a Micro SD card and flashing the new firmware to....
Check Stock

Creality Ender 3 V2 Upgrades V4.2.7 Silent Board 32 Bit Silent Mainboard with TMC2225 Drivers Compatible for Creality Ender 3 Ender 3 Pro Ender 5 Ender 5 Pro 3D Printer

  • NOTE: If you want to install this V4.2.7 silent motherboard on the printer, you need to flash the motherboard firmware to work properly. You can....
  • Firmware Pre-Installed Only for Ender3 V2 - Marlin 2.0.1 and firmware(not BLTouch version) for Ender-3 V2 comes pre-installed on this board. If your....
  • Update the Motherboard Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the....
  • Noiseless - TMC ultra-slience chip, effectively eliminates noise. Low-decibel operation keeps the motherboard running. Using high-quality MOS tube,....
  • High Performance - Equipped with STMicroelectronics 32-bit MCU, which brings a new experience. Connect to temperature sensor via smart fanEnable....
Check Stock

BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Sim Joystick Calibration - Mode 2 Left Throttle

  • ...RS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your drones.
  • 【BETAFPV Configurator】This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update.
  • 【Performance】This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz.
  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solv....
Check Stock

Put Ü First

  • COMPITABLE with PS5 and NEW XBOX SERIES X/S CONSOLES! You can use Xbox One controller to play games on PS5, Xbox Series X/S, PS4, Switch, Xbox one and....
  • Wireless Control (for PS4/Switch/Xbox one): You can play PS4, Switch and Xbox one with Xbox one controller wirelessly..
  • Support Motion Control (for PS4/Switch), Turbo and Remap function: You can set the button configuration by yourself..
  • Audio function: Use your headset on Xbox One controller. (for PS4/Xbox one, Headset compatibility improvement for latest firmware.)..
  • New function after firmware update(V1.4): Wireless use on PC (via Bluetooth, Windows 8 and above suggested, no headset support) / Wired use on Xbox....
Check Stock

AODELAN for Sony Remote Shutter Release ZV-1 A7 III A6400,RX100 VII,A7C,A7SIII,A6600,A7R,A7R III,A6100,A7 III Wireless Remote Replace Sony RMT-P1BT Remote Commander

  • Limited compatible Sony cameras: A7C, A7SIII, a6100, a6400, a6600, a7 III (with Ver. 3.0 firmware update), a7R III (with Ver. 3.0 firmware update),....
  • If you have a Sony mirrorless camera you need this wireless remote. No wires, it simply works perfectly.
  • This remote works perfectly as a remote shutter release, just take this remote control out of your camera bag and it is easy to pair.
  • If you are into macro photography and utilize focus stacking, this is the control for you，it works great as a release and for focus control.
  • Once paired to your camera, allows you to trigger the camera for stills and video with the remote in pocket. It will set off the shutter from in front....
Check Stock

Godox X2T-C 2.4G TTL Wireless Flash Trigger with 2X X1R-C Controller Receiver for Canon,E-TTL II Function,Bluetooth Connect Smartphone APP Control (X2T-C & 2*X1R-C)

  • ...ng multi-channel triggering and stable signal transmission,they are sure to be the great assistant for your studio..
  • 【TTL AF and Pro Functions】Fully support TTL Autoflash,High-Speed Sync 1/8000s, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Modeling Lamp, Firmware upgrade,Memory function,Adjusting All Groups' Output Value Simultaneously,ect..
  • 【Godox 2.4G Wireeless System】Built-in Godox 2.4G TTL wireeless transmission with operate distance reach up to 100 meters, The Godox X1R support GR group flash, max.5 groups & 32 channels remote control and trigger, 01-99 wireless ID setting, the ID and channel of the master unit and the slave unit must be set to match to trigger, effectively avoiding signal interference..
  • 【Multi-Use】Can be used as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions..
  • 【LCD Screen & USB Upgrade】Both X2T & X1R are equiped with large LCD Screen offer clear and convenient operation,Support type-c USB firmware upgrades.
  • New Hotshoe Locking Mechanism with X2T. New AF Assist Light that uses visible light....
Check Stock

Godox X1C X1R-C TTL 2.4G Wireless Receiver Compatible for Canon Series Cameras 1000D 600D 700D 650D 100D 550D 500D 450D 400D 350D 300D

  • Wireless Function: in TTL mode, Ratio off.
  • Synchronization Delay Set: Support (0-10ms, set in unit of 100us).
  • Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface.
  • Wireless Shutter Release: Receiver can control cameras shooting through 2.5mm shutter release interface Zoom Setting: The focal length can be adjusted through the transmitter.
  • Output Interface: Transmitter: use a PC port to input and output.
  • Receiver: use a 2.5mm sync cable to output Firmware Upgrade: Use the Micro USB port to upgrade.
Check Stock

Creality Original Upgrade Ender 3 V2 Intelligent Screen Kit HD Color Screen Display Compatible with Ender-3 V2, Ender 3 pro, Ender 3 3D Printer

  • Our default menu language is in English (Checked by Creality), if your menu is in chinese, please check the second photo, you just need two clicks to change the language without changing any firmware. We are the agent of Creality 3D Printer accessories, so this screen are original from creality.
  • The screen is tilted to make a wide vision and easy to operate. I can be fixed directly on the 3D Printer base..
  • User-friendly UI interface, Brand-new screen allows easier operation via its simple UI interface. And Mass memory, it provides sufficient storage space, and support to store pictures in JPEG compression mode, further increasing the number of stored files..
  • This screen is ONLY used for 32bits motherboard printers, and Here is directly used for ender 3 V2 3D printer, but if change the your motherboard firmware, it also can bed used for ender 3, and ender 3 pro, please flash your firmware to be ender 3 V2 firmware, please check the following description for more details..
  • This screen kit is updated, Intelligent, 24-bit Color Excellent HD screen and Mass Membory..
Check Stock

Retevis RA85 GMRS Radio Handheld, 5W Walkie Talkie Long Range Rechargeable, 2 Way Radio with mic, Flashlight, NOAA,USB-C, for Winter, Skiing, Hunt, Off Road, Survival(2 Pack)

  • you can also modify the wide and narrow bands directly from the screen and keypad.
  • contact us via Amazon mail for the latest firmware.
  • only the new version of RA85 can upgrade the firmware.
  • with chirp you can easily set the wide and narrow bands.
  • and name your favorite frequencies or channels.
  • includes 22 regular channels and 8 base station channels.
  • ensure transmission distance and clear reception.
  • through chirp you can name your favorite frequency or channel.
  • Each channel is preset with CTCSS and DCS by default to prevent unnecessary chatting.
  • which can receive calls from two channels at the same time.
  • LCD display can clearly display frequency.
  • you can charge your walkie talkie anytime.
Check Stock

Retevis RA85 GMRS Handheld Radios,5W Rechargeable Walkie Talkie, Long Range 2 Way Radio, Base Station Capable, Flashlight, NOAA, for Outdoors, Skiing,Emergency, Winter Camping (1 Pack)

  • you can also modify the wide and narrow bands directly from the screen and keypad.
  • contact us via Amazon mail for the latest firmware.
  • only the new version of RA85 can upgrade the firmware.
  • with chirp you can easily set the wide and narrow bands.
  • and name your favorite frequencies or channels.
  • high-power GMRS handheld radio preset 30 channels.
  • display and receive information of 2 frequency bands at the same time.
  • most basic settings are accessible via menu and keyboard.
  • rechargeable 1800mAh lithium battery can provide 14 hours of continuous using time.
  • the body is made of high-quality materials.
  • which is designed to be safe from drops and able to withstand rough and dirty environments.
  • Featured with NOAA weather channel,flaslight and emergency alarm.
Check Stock

Android Smart Projector V5 WiFi Home Theater LED Portable 3D DLP-Link Video Projector Support Full HD 1080P 4K HDMI 3800 Lumens High Brightness Free 3D Glasses

  • 【2019 NEW RELEASE Smart Video Projector V5】300 inch Android Smart 3D Projector Support 4K (at HDMI mode only). Wireless Connection for iphone ipad....
  • 【ANDROID SMART OS】Support download and install APPs, watch movies online, play games. Online firmware update..
  • 【HIGHER BRIGHTESS & RESOLUTION】Native Resolution: 1280*800 (WVGA) ,Max support 4K via HDMI. Support 3D function(DLP-LINK). LED bulb life: 30000....
  • 【WIRED or WIRELESS】2.4G & 5G Dual-band WiFi. Bluetooth 4.0 for wireless speakers or other devices. Ethernet port x1, HDMI 2.0 (Max support 4K) x1,....
  • 【PACKAGE INCLUDES】3D DLP smart projector x1, FREE 3D glasses x1, Power adapter x1, Power cord x1, Infrared remote control x1, User Manual. 1 Year....
Check Stock

4PCS Upgrade Rechargeable Motorcycle Helmet Light, Night Riding Signal Helmet EL Light Sticker, 3 Mode Led Helmet Light Strip Accessories for Motorcycle, Bike Helmet (Purple, Rechargeable Powered)

  • Standard 3. 5mm jack, these speakers fit practically any communicator on the market, no matter what brand.
  • Owners of Cardo FREECOM and PACKTALK series will enjoy extra boost with new JBL sound processor and firmware.
  • Not a FREECOM or PACKTALK owner? No worries: this powerful hardware will still drive your headset audio performance to new heights..
  • With a standard 3. 5mm jack, these speakers fit practically any communicator on the market, no matter what brand. Owners of Cardo FREECOM and PACKTALK series will enjoy extra boost with new JBL sound processor and firmware. Not a FREECOM or PACKTALK owner? No worries: this powerful hardware will still drive your headset audio performance to new heights..
Check Stock

Hitachi LG Multi OS External CD/DVD USB Type C Re-Writer (Fire, Android, Windows, Mac) (Black (True DVD App. Excluded))

  • ...is portable optical drive features a convenient and easy to use DiscLink Platinum app which automatically recognizes and displays album images, song titles and artist information through Gracenote. The app allows MP3 extraction from music CD, as well as backup data from your smartphone to an optical disc..
  • Automatic firmware update : Firmware update utility ensures that important security updates and new devices updates are automatically downloaded by automatic firmware update utility. You can maintain the latest firmware from Hitachi-LG Data Storage..
  • Fire TV DVD Player : Plug into your Fire TV and download DiscLink app from Amazon app store then you can play DVD movie from your Fire TV.
  • What’s Included: This External DVDRW includes everything you need for a smooth and simple installation. Cyberlink Power2Go Tool CD and manual, USB type A and USB type C. The ideal choice for backing up your precious memories or enjoying your favorite music and movies!.
Check Stock