Categories

Best Nextion Display 8

Nextion Intelligent 7.0 inch NX8048P070-011C Capacitive Touch Screen TFT HMI LCD Display 800x480 Support Audio Video (Capacitive Touch)

  • Compared with Nextion Basic & Nextion Enhanced, Nextion Intelligent display has more powerful hardware in terms of MCU, Flash storage and SRAM. Audio, video and animation play functions enrich your project HMI interaction..
  • You can power NX8048P070-011C from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board came with nextion. See image on how to use it..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Nextion Display 3.5 NX4832T035 Resistive Touch Screen UART HMI LCD Module 480 x 320 + Acrylic Case Enclosure Transparent for Arduino Raspberry Pi

  • NX4832T035 is nextion 3.5 basic screen: 3.5 inch TFT, 480x320 resistive touch display, 16M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.5 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Display 3.2 inch NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 + Transparent Acrylic Case Enclosure for Arduino Raspberry Pi

  • NX4024T032 is nextion 3.2 basic screen: 3.2 inch TFT, 400x240 resistive touch display, 4M flash, 2K Byte RAM, 65k colors..
  • You can power nextion 3.2 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

C4Labs DRPi-1NSX case for Raspberry Pi 3 B+, Duplex MMDVM v1.0, 2.4″ Enhanced Nextion Screen (Included) ~ (Black Ice)

  • Full body coverage for Raspberry Pi 3B (not included), Duplex MMDVM v1.0 dual antenna (not included), and 2.4" Nextion Touchscreen(included). Case kit requires assembly. Case is not waterproof..
  • Includes a 2.4″ Enhanced Nextion Touchscreen**Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions..
  • The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included).
  • For Raspberry Pi 3B+, 3B, 2B, and B+ (not included), Duplex MMDVM v1.0 (not included), and a 2.4″ Enhanced Nextion Touchscreen (included).
  • Designed and Crafted by Local Artists at our workshop in Tacoma, WA USA.
Check Stock

DIYmalls Acrylic Case Enclosure Black for Nextion Enhanced 3.5 Display NX4832K035 Resistive Touch Screen (3.5 inch)

  • This acrylic case only works with Nextion enhanced 3.5' NX4832K035, not for Nextion 3.5 Basic NX4832T035..
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

CP2102 6 in 1 USB to TTL Serial Adapter Module USB to TTL 485 232,TTL to 232 485,RS232 to 485 + 4P Dupont Cable Jumper Wire Female to Female for Nextion Display Beitian GPS Arduino Windows

  • -cp2102 serial adapter module supports usb to ttl, usb to rs232, usb to rs485, ttl to 232, ttl to 485, 232 to 485..
  • -USB specification 2.0 not 3.0, compatible with arduino,Windows XP/7/8/10 32bits/ 64bits, Linux etc..
  • -You need to set the dip switches for different conversion purpose..
  • -Before make 6 in 1 usb to ttl module work, you need to install cp2102 driver..
  • -cp2102 usb to ttl adapter widely used with nextion display, beitian gps, esp-01s adapter, sim7000a board etc..
Check Stock

Nextion Enhanced 4.3 inch Display NX4827K043 HMI Resistive Touch Screen LCD Module 480x272 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4827T043, NX4827K043 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4827K043 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 3.5 HMI Resistive Touch Screen UART LCD Display Module NX4832K035 480x320 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4832T035, NX4832K035 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4832K035 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 2.4 inch Display NX3224K024 Resistive Touch Screen UART HMI LCD Module 320x240 + Acrylic Case Enclosure for Arduino Raspberry Pi

  • Compared to NX3224T024, NX3224K024 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX3224K024 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Nextion Enhanced 3.2 inch NX4024K032 HMI TFT UART LCD Display Module Resistive Touch Screen 400x240 + Acrylic Clear Case Enclosure for Arduino Raspberry Pi

  • Compared to NX4024T032, NX4024K032 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU..
  • You can power NX4024K032 from 5V pin of microcontroller but not recommended. Working with insufficient power may damage screen, so pls use power board....
  • You need a USB to TTL adapter to plug nextion display into USB port..
  • The Battery (NOT included) is NOT used to supply power for display. It is only to keep the Real Time Clock running when there's no power to the....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

C4Labs JRPi-3.5NSX Nextion Screen Case for Raspberry Pi 4B & 3B+, Jumbospot MMDVM, and 3.5\ Nextion Screen (Included)

  • If you have a Zumspot Brand MMDVM Board there is a new case model: ZRPI-3.5NSX.
  • For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), JUMBOspot (a generic Chinese MMDVM board - Not included), and a 3.5″ Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included..
  • *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions..
  • Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.* The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included).
  • Engineered and manufactured with Pride in Tacoma, WA USA.
Check Stock

C4Labs ZRPi-3.5NSX Nextion Screen Case – Raspberry Pi 3 B+, ZUMspot MMDVM, and Enhanced 3.5\ Nextion Screen (Included) ~ Black Ice

  • If you have a Generic Chinese MMDVM Board (Jumbospot) there is a new case model: JRPI-3.5NSX.
  • For Raspberry Pi 4B, 3B+, 3B, 2B, and B+ (not included), ZUMspot Brand MMDVM Board (Not included), and a 3.5" Enhanced Nextion Touchscreen (included). Carefully designed to precisely fit these components using Laser cut components and stainless steel hardware. Full body coverage for components (not waterproof). Heat sinks and rubber feet included..
  • *Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions..
  • Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.* The new inner layers have been designed to fit the Pimoroni Fan SHIM (not included).
  • Engineered and manufactured with Pride in Tacoma, WA USA.
Check Stock

MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (Raspberry Pi NOT Included)

  • Save electricity, High quality TCXO, stable, low BER. Note: This is NOT a completed or assembled Hotspot, it is just MMDVM Board with Aluminum case..
  • Support Raspberry Pi 3B, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Support VHF/UHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG.
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
Check Stock