Categories

Best Nipple Fittings For Water Lines

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

CHARLOTTE PIPE 2 SCH 40 COUPLING SXS PRESSURE ( 1 Unit Piece )

  • White fittings that are used in potable water applications only.
  • For use where systems will not exceed 140° F.
  • PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Direct Source International QRPSV Small Vertical Quick Release Plier

  • Used on push lock fittings for air as well as hydraulics, vacuum lines, wiper lines, water lines, and steering lines.
Check Stock

Direct Source International QRPLV Large Vertical Quick Release Plier

  • Used on push lock fittings for air as well as hydraulics, vacuum lines, wiper lines, water lines, and steering lines.
Check Stock

Anderson Metals - 38300-1625 38300 Lead Free Red Brass Pipe Fitting, Nipple, 1' x 1' NPT Male, 2-1/2' Length

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

DoubleWood 20Pcs Chicken Nipples Horizontal Side Mount Poultry Water Nipple Waterer Drinker Outdoors for Chicken Ducks Quail and Other Poultry (20)

  • MATERIAL- Made with durable plastic and stainless steel, last long time in outdoor exposure use..
  • EASY TO INSTALL- Just drill a hole in the side of your container and tighten the chicken nipple in by hand..
  • AUTOMATED- This horizontal chicken waterer will release water only if the steel rod is triggered by the flocks and then shuts off whenever no bird is striking into it. All you need to do is refill the bucket/container whenever water is runs out..
  • SUGGESTION- One nipple per every 4 chickens / poultry. Chicken nipples waterer require a low-pressure water source. When it is connecting to household water lines, a pressure regulator will be need..
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

RIDGID 48553 MegaPress Jaws And Rings, 1/2 Inch to 2 Inch MegaPress Kit, Hydraulic Crimping Tools

  • Ideal for black iron pipe in chilled water lines, natural gal lines, compressed air, heating fuel oil, and is FM and UL approved (pending) for the installation of fire sprinkler systems.
  • The MegaPress Jaws and rings and RIDGID Press Tools work together to allow press connections on “wet” sprinkler systems.
  • No Flame Required - MegaPress fittings and RIDGID Standard Press Tools work as a flameless system that eliminates the need for hot work permits.
  • Backed by RIDGID Full Lifetime Warranty against material defects and workmanship.
  • For use with MegaPress and MegaPress G fittings to join 1⁄2 inch to 2 inch commercially-available black iron pipe schedules 5-40.
Check Stock

Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System

  • Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings..
  • Compatibility: This valve works only with models 500800, 500803, 500805, and 500899..
  • This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater..
  • Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches.
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock