Best Nipple Mating Hose Fitting

NEW MSD HIGH PRESSURE ELECTRIC FUEL PUMP,45 GPH AT 60 PSI.375" HOSE NIPPLE INLET & OUTLET

Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
Features: 45 GPH at 60 PSI | 3/8" Hose nipple inlet & outlet.
Specs: Brand: MSD | Current Draw: 12 Amps at 14 Volts | [email protected]: 45 | Inlet & Outlet Size: 3/8 in. Nipple Fitting | Product Type: Fuel Pump.

King combination nipple for connecting two hoses of different diameters in a straight run.
Connects to a hose on one end and an NPT female connector on the other.
Plated steel for greater corrosion resistance than unplated steel.
Barbed fitting for a tight seal on hoses.
King combination nipple for low-pressure discharge or suction service.

Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..

Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..

The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.

F-Series Fumoto Valve With Long Nipple And Lc-10 Lever Clip For M14 - 1. 5.
Allows For Clean And Mess Free Oil Changes. Nipple diameter-3/8 inch, Nipple length-1/2 inch.
One Touch Operation. Sealing Type: Fiber Gasket.
Standard Length Nipple For Easy Hose Attachment.

... 【All Metal Hose and Drill Free Shower Holder】Hibbent all metal shower hose is made of braided stainless steel and EPDM inner lining to ensure corrosion resistance and durability. 59 Inch shower hose has solid brass connector that comes with brass insert and brass nipple, both sides fitting are 1/2'' straight threads. A free shower holder is available to hold handheld shower head, and the hose when not attached to faucet sink which is easy to install with adhesive glue..

【DURABLE】Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..
【INCLUDE】1 x 1/4 Tee Fitting, 4 x1/4 Elbow Fitting, 4 x 1/8 Elbow Fitting, 1 x1/4 Coupling, 1 x 3/8-1/4 Nipple & Reducer & Bushing, 1 x 1/4-1/8 Nipple & Reducer & Bushing.

【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
【PACKAGE CONTAINS】5/16'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
【TIGHT CONNECTION】5/16 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 5/16'' hose ID hose barb fittings. Meet your multiple needs..