Categories

Best Nissan 3 3 Crank Pulley Removals

SCITOO AC Compressor with Clutch CO 11319C Compatible for Nissan Maxima Murano Pathfinder 3.5L 2011 2012 2013 2015 2015

  • ☃AC Compressor Fitment: 2008-2014 Fit for Nissan Maxima 3.5L,2009-2014 Fit for Nissan Murano 3.5L,2013-2015 Fit for Nissan Pathfinder 3.5L,2011-2015 Fit for Nissan Quest 3.5L.
  • ☃Advantages: Compressors are the heart of the air conditioning system,so each SCITOO air conditioner compressor is subjected to a variety of conditions and life cycle performance testing. 100% Brand New and High Quality, Fully re-manufactured and tested OEM unit-premium ISO/TS 16949 quality.
  • ☃AC Compressor and AC Clutch Part Number: CO 11319C, TEM275719,TEM255282,92600JP01C, 10000652, 926001JA1A, 10000772Y,2021990AM, 140921, 10347880, 5512742,68671, 255282, 275719, C2164. Oil Type: PAG46, Pulley Grooves:7, Pulley Diameter (mm): 115, Compressor type: DKS17D.
  • ☃Important Reminder: Before installing the air conditioning compressor please clean the cooling system pipe of the your car, If sundries or metal shavings in the cooling system pipe make the system stuck,it will shorten the life of the parts dramatically.
  • ☃Warranty: All units are pressure tested with nitrogen for leaks to ensure product quality.
  • AC compressor pump is backed by industry leading warranty, 1 year warranty.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warran....
Check Stock

Cloyes C-3210 3-Piece Set

  • Only fit - 2003-2005 INFINITI FX35 3.5L 3498CC V6 DOHC,2003-2005 INFINITI G35 3.5L 3498CC V6 DOHC,2003-2006 for NISSAN 350Z 3.5L 3498CC V6 DOHC,2002-2003 for NISSAN ALTIMA 3.5L 3498CC V6 DOHC,2002-2003 for NISSAN MAXIMA 3.5L 3498CC V6 DOHC,2003-2007 for NISSAN MURANO 3.5L 3498CC V6 DOHC.
  • What you get - 1x Timing Chain ,2x Timing Chains,1x Crank Sprocket (26 teeth),2xSprockets (external),1x Guide Rail (tensioner arm),1x Guide Rail (top - fixed),1x Guide Rail (left - fixed),1x Tensioner (lower),1x Tensioner (upper - left),1x Tensioner (upper - right),1x Water Pump with Gaskets.
  • Product features - Premium quality link belt type timing chain for exceptional durability,Meets or exceeds OEM performance requirements,Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
  • QUALITY - All components are closely inspected and validated to meet the strictest quality standards to ensure a long lifetime.
  • Part number - 13024-AL50A, 13025-EA22A, 13021-AL51A, 13028-JK20B,13024-AL50A, 13025-EA22A, 13021-AL51A, 13028-JK20B.
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

ARU Crank Pulley Tool Kit Screw Wrench Holder,Compatible with Subaru Imprezas 93-18 (EJ Engines only)

  • New V2 design has upgraded small pin reinforcement ring for loosening the toughest crank pulley bolts.
  • Integrated low profile handle allows you to easily remove your crank pulley with the radiator still in the car.
  • 2 sets of removable pins allows you to remove either style crank pulley found on applicable models.
  • Comparable and can be used in place of factory tools #499977000, 499977100, #499977300, and #499977400.
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SCITOO Alternator 13639 fit for Infiniti I30 1998-2000 for I35 2002-2004 For Nissan Maxima Murano 1995-2003 For Murano 2003-2007 AHI0104 IR/IF 110A

  • BENIFIT - Alternators with longer life,resist heat and moisture, protect alternators from excessive charging or failure due to shorts in your cars wiring that can cause spikes or open circuits.
  • REPLACEMENT - AHI0104 LR1110-710C LR1110-710F 400-44021 13826 23100-2Y900 ALT-3212 A204-4032R ALT-3212 1-2382-01HI.
  • COMPABILITY WITH - Alternator for Infiniti I30 1998-2000 V6 3.0L I35 2002-2004 V6 3.5L Nissan Maxima 1995-2000 V6 3.0L 2002-2003 V6 3.5L Murano 2003-2007 V6 3.5L.
  • SPECIFICATION - Part Type: UNIT, Voltage: 12, Rotation: CW, Amperage: 110, Pulley Class:S6, Regulator: IR.
  • Brief: For MAXIMA INFINITI I30 2000, 6-GROOVE PULLEY, 63mm OD.
  • CYCLING - New Alternator high Output are computer for voltage stability, terminal function, and circuit board integrity.
Check Stock

Ford Racing M-8600-M50BALT Alternator Kit for Ford Mustang Boss 302

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Installing this BBK Performance Underdrive Pulley is one of the Easiest Ways to Gain Approximately 8-10 Horsepower.
  • Direct Replacement Pulley Kit Requires a New Shorter Length Serpentine Belt and Will Not Affect Cooling or Charging of the Vehicle.
  • Premium Quality CNC Machined Lightweight Crank Pulley Kit Adds Great Looks and Performance.
  • 1 Pc Kit Includes Crank Pulley Only, All Hardware and Instructions for Simple Installation.
Check Stock