0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing
- Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
- Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
- Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
- Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
- Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check StockUniweld R1563 NITROGEN REGULATOR 5-175 PSIG
- Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
- Bright orange float ball visually confirms the flow of nitrogen gas.
- Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
- Protected from over pressure with a reseatable safety blow off that opens at 200 psi.
Check StockUniweld UNF3 Nitrogen Flow Indicator with 1/4-Inch Female Flare Inlet Connection and 1/4-Inch Male Flare Outlet Connection
- Nitrogen Flow Indicator, 1/4 Inch Female Flare Inlet Connection, 1/4 Inch Male Flare Outlet Connection.
- Provides extremely low pressure (3 to 4 CFH) precision gas flow control for nitrogen purging applications.
- Nitrogen Flow Indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of copper tubing in HVACR systems.
- Over Pressure Safety Relief Rupture Disk.
Check StockSPARC Nitrogen Flow Indicator 1/4 SAE Flare Inlet and Outlet 50PSI 2YR USA Warranty
- CONNECTIONS ✔ Nitrogen Flow Indicator, 1/4 Inch SAE Female Flare Inlet Connection, 1/4 Inch SAE Male Flare Outlet Connection.
- GREAT FOR ✔ Provides extremely low flow / high precision gas control for nitrogen purging applications.
- MEASURES ✔ 0-75CFH flow output @ 50psi. Nitrogen Flow Indicator uses a float ball to visually confirm the nitrogen is flowing during the brazing of....
- SAFETY ✔ Over-Pressure Safety Relief Rupture Disk.
- WARRANTY ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and....
Check StockUniweld NV1 Nitro Vue Flow Indicator with 1/4\ Flare Fittings Single-Gas Flowmeter, Regular, Silver
- Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
- Bright orange float ball visually confirms the flow of nitrogen gas.
- Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
- Protected from over pressure with a reseatable safety blow off that opens at 200 psi.
Check Stock
iSi North America 2293001 Decorator Tip Red Tulip for Gourmet Whip & Thermo Whip by iSi North America
- Case of 6 Nitro Whips offer a way to create Nitro coffee, tea and cocktails at the table setting or bar side.
- The Nitro Whip provides a simple process for infusing Nitrogen gas into liquid for nitro brew coffee, nitro teas and cocktails.
- just fill the Nitro Whip with cold liquid, charge with one iSi Nitro charger, shake and dispense for a spectacular cascading effect, making each beverage unique.
- Nitrogen creates a velvety creamy texture and long lasting foamy head for brews and cocktails.
- Nitro Whip allows dispensing fresh for every serving and the closed system allows the brew to remain unchanged for several days in the refrigerator.
- NSF approved, stainless steel bottle, designed for professional use.
- non-slip silicone grip on head and charger holder.
- specifically designed valve safely regulates nitrogen gas pressure and introduction in to the bottle.
- For use with only iSi Nitro Cream chargers (N2), no other charger will work with in the iSi Nitro Whip.
Check Stock
Royal Brew Nitro Cold Brew Coffee Maker Home Keg Kit System
- NITRO BREW: Enjoy the great taste of Nitro Brew coffee, without paying at a coffeeshop each time! Enjoy unlimited home brews: by adding Nitrous Oxide or Nitrogen, your cold brew coffee will taste better and stay fresh MUCH longer!.
- GREAT TASTE: Modeled after stout beer dispensing systems, featuring a special gas blend and stout beer faucet that work together to create a super-smooth, rich body with a foamy top similar to your favorite draught beer. Enjoy a frothy iced coffee without the need of creamer, dairy, or sweeteners!.
- THE ORIGINAL & #1 MODEL: Beware of copycats, we’re the original model, check our videos and great reviews! Attractive, durable matte flat black finished, food grade stainless steel 64 oz keg.
- coffee spear with unique pressure relief valve.
- Plastic hose (Make sure it is cut to only 20 cm long!).
- COMPATIBILITY: Use one 8g N20 (Nitrous Oxide) Cartridge or two 2g N (Nitrogen) Cartridges, for best results use 1 x FOMA N2O cartridges (Search B07H6MC1NF on Amazon) or any Nitrous Oxide cartridge (not included). Also works with Nitrogen, but we recommend N2O Nitrous Oxide for cascading foam! The Royal Brew is compa....
Check Stock
Nitrogen Regulator 0-600PSI CGA580 Inlet, 1/4-Inch Male Flare Outlet Connection, Heavy-Duty Handle, Self-reseating Relief Valve, Nitrogen Regulator Hvac, Helium Regulator, by NAKAO
- ➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
- ➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure..
- ➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation.
- ➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
- ➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check StockLUCKEG CGA580 Nitrogen Beer Regulator Dual Gauge Gas Air Pressure Regulator with 0-100 PSI Delivery Pressure Premium Double Gauge Nitrogen Keg Regulator with 5ft Gas Line and Free Worm Clamps
- 1.Include: Draft Beer Regulator CGA580(1 PCS), 5ft Red Gas Line 5/16" ID, 9/16"OD(1 PCS), Free Worm Clamps(2 PCS).
- 2.Material: Metal for Nitrogen Regulator, PVC Material for Gas Line, Stainless Steel Material for Clamps.
- 3.Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
- 4.Gas Gauge: 0-100 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, Recommended pressure is 15-30 PSI which keeps you safe when you operate regulator.
- 5.You will be protected by our hassle free guarantee. If you have any problem about Nitrogen Regulator, please feel free to contact us, we'll help you solve it until you are satisfied..
Check StockiSi Nitro Charger with Nitrogen Gas for use with iSi Nitro Whip, Box of 16 Individual Chargers, Bronze
- Nitro Charger only for use with iSi Nitro Whip for preparing Nitro Brew coffee, tea and cocktails.
- Includes 1 boxe of 16 pack Nitro Chargers.
- each charger holds 2.4 grams of Nitrogen Gas N2 only for use with iSi Nitro Whip.
- 16-count box of Nitro Chargers (Nitrogen Gas) in metallic bronze color, designed only for use with iSi Nitro Whip..
- Always use iSi Nitro Whip and Nitro Charger in combination and only in accordance with instructions.
- do not use for other purposes than to create Nitro coffee, tea and cocktails.
- Remove empty charger after dispensing all contents.
Check StockLZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow
- This gas meter is connected to hose to measure unidirectional gas flow.
- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
- It is simple to use, and has 8mm barbs for convenient connection to hoses.
- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
- Mainly used for detecting the flow, control flow and can be used in industry.
Check StockGas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas
- INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
- MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
- IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
- MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
- MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check StockMSA 10125914 Altair 4X Multi Gas Detector Charcoal
- Methane, Oxygen, Carbon Monoxide, Nitrogen Dioxide.
- Dependable multiage detector tests for LEL, oxygen, carbon monoxide, hydrogen sulfide, sulfur dioxide and nitrogen dioxide.
- Economical construction saves users more than 50% on calibration gas, replacement sensors and maintenance.
- Four-year sensor life means detector lasts 60% longer than the industry average.
- Two-tux CO/H2S sensor removes practically all cross-channel interference.
Check Stock
