Categories

Best No Gas Mig Welder

Eastwood Mig Welder Consumables Kit Contact Tip Set Torch Gun & Gas Nozzles in Plastic Storage Case

  • Kit Includes A Complete Set Of Consumables For Your Eastwood Mig135 Or Mig175 Welder Or Any Other Mig Welder With A Tweco-Style Torch..
  • With 20 Contact Tips (Ten 0.023 in./0.6 Mm And Ten 0.030 in./0.8 Mm).
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

HZXVOGEN Multifunctional MIG Welder 110V 220V 185A with Color LCD Display IGBT Inverter MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine Model MIG185Ⅱ

  • ★ THE COOLEST AND PLEASANT MULTIFUNCTIONAL WELDER - HZXVOGEN MIG185Ⅱwelder came with color LCD display with make the setting parameter very easy....
  • ★ MIG FUNCTION - HZXVOGEN MIG185Ⅱwelder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld....
  • ★ LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a....
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little....
  • ★ IMPORTANT NOTE - This welder can work on both 110V and 220V. The “SIM” ”SIG” is for dual pulse function, but this welder does not have....
Check Stock

Welding Machine 3 in 1 Gasless Mig Welder 110/220V, Flux Core/Lift TIG/Stick Welder 160A

  • Welding Machine 3 in 1: 3 in 1 combo gasless flux core welder, stick welder and Lift TIG welder. (TIG torch need purchasing separately)..
  • Dual Voltage Input Design: Welding machine can be plugged into 110V / 220V dual voltage (automatic matching)..
  • 160A Welder: Up to 160A output current that can weld mild up to 5/32 inch (4.0mm) plate. The welder comes with 10pcs welding rods..
  • Gasless MIG Welder: Release hard moving of gas cylinder, and work with flux core wire perfectly( welder suitable for 0.030/0.035" flux core wire), comes with 1pcs 0.030"/2 lbs flux core wire, 2pcs 0.030" mig tips, 2pcs 0.035" mig tips..
  • Synergic Control: Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

ZENY MIG130 Gas-Less Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask AC Current 60 AMP – Commercial Grade – 110 V

  • 【Solid Construction】– ZENY MIG 130 welding machine is compact and exquisite MIG welder is constructed of high-quality durable steel, fully painted body can withstand rust and wear, a strong and durable welding machine for your long-term use.
  • 【Flux-Cored Wire, Gas Less Welder】– This welder machine uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. Automatic Thermal Safety Protection, Ideal for welding mild steel, stainless steel..
  • 【 Adjustable Feeding Speed】– ZENY MIG welder features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. It also features a wire feeding speed adjust rotary knob, 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • 【Widely Applications】– It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specifications for This Welder】– Frequency : 50/60HZ/ Max absorbed power (KVA): 3.6/ Absorbed power 60% (KVA): 1.1, Power factor:0.9, Flux wire diameter (MM): 0.8-0.9, Max Open Voltage: 37V/ Current range (A):50-90.
Check Stock

ARCCAPTAIN MIG Welder, 200Amp 6 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG/Spot welding/Spool Gun 110V/200V Aluminum Multi Process Welding Machine with LED Digital Display, Burn Back Adjustment

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

  • 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
  • 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
  • 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
  • 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
  • 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check Stock

YESWELDER Plasma Cutter Welder Combo Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welding Machine FIRSTESS MP200

  • Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welder.
  • Can take up to 0.9mm(.035") MIG solid wire(Gas MIG) and 0.9mm(.035") MIG FLux wire(Gasless MIG)..
Check Stock

JINSLU MIG Welding Gun 100A 8-ft Replacement Compatible with Chicago Electric Welder Parts/Clarke Torch Stinger Welder 130EN 160EN 180EN / Craftsman 20569 20504 / Harbor Freight Welder And More.

  • 【Perfect Replacement】: The MIG Welding Gun is perfectly compatible with Chicago Electric Welder Parts, Clarke Torch Stinger Welder 130EN 160EN....
  • 【What Is Inside】: 2 trigger wires, gas hose, wire liner, and power cable all running up in the hollow plastic hose, There is a gas valve in the....
  • 【Parameter】: 100A gas shielded welders. Wires diameter :0.6-1.0mm（0.023‘’-0.04‘’）. You can connect this mig gun with a wire feed motor....
  • 【Of Course You Can Try】: We are very confident in our MIG gun and we believe this MIG torch can bring you a good experience when welding. Just....
  • 【About Brand JINSLU】: JINSLU has many years experience in the sale of professional welding products. JINSLU only provide customers with high....
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

  • The New Mig 155 GD is perhaps the most capable and versatile MIG welder in its class. Equipped with features designed to meet even the most demanding welding jobs while not breaking the bank. The 155 GD can perform MIG, flux core and DC stick welding as well as the ability to adapt scratch TIG with the optional TIG torch available through our website..
  • This latest version of our economy minded 155 amp MIG welder now includes the ability to remove the torch cable and replace it with our aluminum spool gun. After inserting the spool gun a simple flick of the switch inside the welders drive roller housing enables spool gun operation..
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little ....
Check Stock