Categories

Best No Standard Flange

Quick Fix Exhaust Flange,Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless

  • Brilliant Compatibility:Exhaust Flange Spring Bolt Repair Pipe Kit,universal for most vehicles and can repair your car very well and effectively.2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
  • Stainless Steel Material:Quick Fix 2.25in Exhaust Flange Made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use:Exhaust Flex Spring Flange Easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one.Built to meet standard specification, strictly follow factory quality control..
  • Feature:Universal Exhaust Flange,Quick fix flange repair pipeline assembly, which meets strict quality control standards and can be used reliably..
  • Standard Specification:Exhaust Spring Bolt Flange Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications..
Check Stock

CELAENO Kitchen Sink Garbage Disposal Flange and Stopper Durable Gunmetal Black/Gray Stainless Steel Sink Flange with Nano Surface Fits 3-1/2 Inch Standard Sink Drain Hole

  • High Quality: This sink flange with stopper is made of top grade 304 stainless steel. Solid construction for durable and long service life..
  • Oil Free Tech: The gunmetal black/Gray kitchen sink flange with Nano Surface works like water on Lotus leaf, non-oil stick, no water trace....
  • Match Condition: Fits 3.5 Inch standard drain opening, the gunmetal black/gray garbage disposal flange and stopper color will be slightly bright than....
  • Easy to Install: You just need to make a tight seal with silicone sealant at the bottom of the flange and the top of the sink drain opening..
  • Easy to Remove Garbage: The garbage disposal flange stopper can block the drain effectively and help you hold water. Pulling up the stopper allows you....
Check Stock

Danco 10672X Flange Repair, small

  • FIXES WOBBLY LEAKY TOILETS - The Next By Danco HydroSeat Toilet Flange fixes wobbly or leaky toilet issues by repairing a damaged, broken or old closet flange..
  • FITS MOST STANDARD TOILETS - This toilet flange was designed to fit many standard toilet or closet flange. It's durable and flexible construction allows to fit all pipes, toilets and collars..
  • ASSURES A PERFECT SEAL - Installed together with a wax ring or waxless toilet ring to ensure a tight fit and multiple resets. The Sure Seal technology prevents any sewer gas smells from the bathroom..
  • SELF-CENTERING GASKET - The self-centering gasket grips the toilet horn for a complete seal and attached bolts make for a hassle-free seating. Equipped with durable powder-coated steel construction..
  • KIT INCLUDES (1) HydroSeat with rubber funnel, (2) 4-1/2 inch steel screws, and (2) stainless steel washers and nuts.
Check Stock

Taco 007-SF5 Stainless Steel Flanged Cartridge Circulator, 125 PSI,115V

  • Stainless Steel Construction, Standard High Capacity Output Compact Design.
  • Unique, 00 family replaceable cartridge contains all of the moving parts so you can service it easily instead of replacing the entire unit..
  • Quiet, Efficient Operation, Direct Drive-Low Power Consumption.
Check Stock

Replacement Escutcheon Cover Plate, 4 Inch Universal Shower Arm Flange Escutcheon Replacement Cover Plate, Chrome

  • Excellent Design: Do you have a larger hole where your shower arm is located? Do you want to cover up this ugly hole? If so, Ancable 3.5" large diameter flange is designed for this and is perfect for covering gaps, holes and damage in walls. Ideal for G1/2" standard shower pipes..
  • Top Material: Shower arm flange escutcheon plate is made of high quality stainless steel, not easy to rust and durable. A durable rubber spacer in the center guarantees a perfect fit, allowing you to use it comfortably for long periods of time..
  • Easy to Install: Just remove the shower head and slide the new flange onto the wall, the additional attached small gasket on it made it fit snuggly against the pipe and keep water out. No tools required, installation takes just a few minutes..
  • Perfect Accessory: With this shower arm flange, save yourself time and money when remodeling your shower without having to go to the big store to find the right size. The chrome finish looks beautiful and pairs beautifully with other chrome accessories to match the modern style of your bathroom..
Check Stock

4 1/4 Inch Round Shower Floor Drain Grate with 2 Inch Threaded Adaptor and Drain Base Flange, Brushed Gold

  • 【Size】- 4.5" outside diameter, with 4.25" screw mount round drain grate. Base flange connects to 2" or 3" drain waste pipe, fit standard U.S. plumbing connection.
  • 【Material】- This round shower drain made of sus 304 stainless steel, base flange made of ABS. High quality to enhance the longevity.
  • 【Design】- This 4-1/4" round shower drain grate with large aperture grid design to enhance water flowing, height adjustable design with threaded adaptor. Brushed Gold finish to prevent scratches, corrosion and tarnishing.
  • 【Installation】- Fits US NO HUB Drain Base System. Works with maximum 2.36 inch outside diameter and 3 inch inside diameter drain pipe. Can be used in bathroom, kitchen, balcony, roof, garage, basement and toilet, etc..
  • 【Packing】- Come as a combo set, no need to assemble. Complete accessories include square 4 1/4" drain grate, threaded adaptor, rubber gasket, base flange. Brushed Gold finish..
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

CBW Washer (250 pcs.)

  • DIMENSIONS IN INCHES: Hole Size: 1-3/32 Flange Diameter: 1.865 Length Under Flange: .465 Metal Thickness: .025 Inside Diameter: 1.195 Outside Diameter: 1.910 Metal Thickness: .020.
  • FAST SHIPPING - Orders are shipped within 1 business day. All orders placed by 2:30pm ET ship same day!.
  • HIGH QUALITY - All products are rigorously inspected in-house to yield near-zero defect rates. Stimpson has been ISO 9001 certified for over 10 years..
  • RICH HISTORY - Founded in 1852, Stimpson produces the largest variety of standard and special eyelets, grommets, washers and hole plugs of any single company in the world..
  • LIFETIME GUARANTEE - No hassle return for any item defects, full replacement of items guaranteed..
Check Stock

WOODBRIDGE SBR6036-1000R-BN Shower Base, 60\x 36\

  • ...s thickness. and Will not mold or mildew, no grout to clean..
  • ✅️[INTEGRAL FLANGE]: Integral 3-sided tiling/water retention flange for easy installation.
  • ✅️[STAINLESS STEEL DRAIN COVER]: Removable Brushed Stainless Steel trench drain cover included. Giving the shower base a modern look..
  • ✅️[DRAIN INCLUDED]: Standard White PVC Drain included, Save the trouble and cost to buy a new drain..
  • ✅️[SLIP RESISTANT DESIGN]: Slip resistant bottom. No worry about slipping in the shower.
  • ✅[EASY MAINTENANCE]: Will not mold or mildew, no grout to clean. can also be sanded down to remove any chips or scratches over time, without causing any damage to the look or quality of the product..
  • ✅[PACKAGE INCLUDED]: Shower base, Brushed Stainless Steel trench drain cover, Standard White PVC Drain, user & instruction manual. Besides, extremely solid package - very firm carton box is used to transportation , making sure a safe delivery..
  • ✅[CERTIFICATIO]: US & Canada UPC & CSA certified products.Woodbridge US based product support team is happy to assist with any sales or product-oriented queries..
Check Stock

Gardall SL4000F Heavy Duty Concealed Wall Safe

  • 1 each non-removable shelf is located right in the center (i.e 6 inches)..
  • The model SL4000F comes standard with a flange for easier and cleaner looking installation..
  • The model SL4000F comes standard with a flange for easier and cleaner looking installation. This all steel construction wall safe has 1/8" steel body and a 1/4" solid steel door. It mounts easily into standard 16" wall studs (hardware is not included)..
  • A wall hanging easily conceals the safe..
  • It also comes standard with a combination lock..
Check Stock