Categories

Best No Voltage Output

Songhe 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Voltage Adjustable Module Laptop Voltage Charger Board Car Power Board 6A (5pcs)

  • Output power: natural cooling 100 w (MAX), strengthen heat 150 w (MAX) real power use time more actual situation, please Decide whether to add fans, please be sure to ensure heat sink temperature not to exceed 80 degrees..
  • DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be less than the input voltage..
  • Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need..
  • (1) continuous adjustable output voltage (12-35 v).
  • (2) fixed output (select) between 12-35 v, when buying, please tell the shopkeeper..
  • Input current: 16 a (MAX) (please strengthen heat, more than 10 a).
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

DROK LM2596 Analog Control Buck Converter DC-DC Step-down Transformer Voltage Regulator Module 36V 24V 12V to 5V 2A Power Inverter Volt Stabilizer with Red LED Display Voltmeter Board Input/Output Voltage

  • Analog Control: using a mini screwdriver to increase or decrease output voltage by adjusting the screw, clockwise to step up voltage and....
  • Has very stable output, input range is DC 4~40V and output range is DC 1.25~37V, please make sure the input voltage should be higher than output....
  • Press the button next to voltmeter to test input voltage or output voltage. Green LED lights on when testing output voltage.
  • With input and output voltage measurement error calibration function.
  • Wiring terminals require no soldering iron and create convenient usage..
  • Press the button for 1 to 4 seconds, voltmeter would be shut off when releasing your hands.
Check Stock

Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter

  • No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
  • Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
  • Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
  • Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
  • The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
  • Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
Check Stock

D-PLANET [8-Pack] LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module …

  • Input voltage range： DC 3 -40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
  • Output voltage range：Output: DC 1.5 - 35 V voltage is continuously adjustable, maximum output current is 3 A.
  • 8 pieces of LM2596 board and heat sinks included.
  • Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver..
  • 100% SATISFICATION SERVICE: If there are any problem with our products, please feel free to contact us. you can request a refund for any single module....
Check Stock

Valefod 6 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Power Supply Step-Down Module

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state....
  • 【Input Voltage】DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
  • 【Mini Size】45 * 23 * 14 mm (with potentiometer). 6pcs included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue....
Check Stock

5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

  • Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
  • Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A.
  • Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
  • Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.
Check Stock

Dorhea 7PCS LM2596 DC to DC Buck Converter Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Adjustable Power Supply Step Down Module

  • The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
  • DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
  • The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
  • Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....
Check Stock

CBI Tools New Cable and Wire Grip 2000lb Capacity - Cable Size 3/32"-5/8"

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

Ampeak 1200W Pure Sine Wave Power Inverter and AC Power Inverter Remote On/Off Switch

  • 【Anti-spark Protection】: Built-in CPU control starts to prevent sparks to protect your safety, and to avoid damage to the battery connectors. Use Ampeak 1200watts pure sine wave inverter with safety, no scaring..
  • 【Digital LCD Display masters the power inverter working status】: Can show you Input voltage, Output voltage, Output Watts, Output Current, Internal temperature, Battery status, Battery status percentage, Output frequency, and indicate protection in time..
  • 【17 Safe Protections】: Ampeak 1200Watts pure sine wave inverter is the safest. Advanced pure sine wave best technology provides 17 safe protections: Anti-spark,Busover Voltage, Buslow voltage, Vcclow Voltage, Reverse Polarity, Batover Voltage, Batlow voltage Over current,Overload ,Invter overcool,Invter overheat,Invover Voltage,Invlow Voltage,Commwarn,Front Overcool, Front Overheat Short Circuit, fully protects and extends the life of your electronics and appliances..
  • 【Independent Remote Control】: Flush mountable design making for clean and simple installation, Features a soft switch allowing you to turn on or off the LED indicator light..
  • 【Remote Advanced Intelligence】: Turns inverter on and off from up to 20 feet away, Includes RJ11 long phone cord for remote hookup..
Check Stock

1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power

  • ★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
  • ★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
  • output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
  • ★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
  • with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
  • ★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
  • ★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

  • DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
  • Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
  • Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
  • Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
  • Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
  • please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
  • please add heatsink when the output power is larger than 15W..
Check Stock

ATNSINC 4Pack LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module

  • The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.).
  • The output voltage: DC 1.5 - 35 V adjustable..
  • The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required)..
  • Steps: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage..
  • Package includes:4XLM2596 DC-DC buck converter module（Note：The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
Check Stock