Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8', 1/2', 5/8') | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y
- MOTOR: 8-Amp motor with intense power (530W).
- TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed.
- APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees.
- FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency.
- PRESET DIAL: With the turn of a pre-set dial, bends can be made in a variety of angles.
- COMPACT: Extremely low profile design (18. 4" L x 8. 5" H x 9. 1" W), yet extremely stable.
- LIGHTWEIGHT: Only 42 Lb., makes it portable and maneuverability for ease of use on any jobsite.
- EASY TO READ MARKINGS: Reference markings on bending plate provide for easy position adjustment.
- METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check StockLight‑Cured Steele Professional Steel Plate Good Performance withdustrial Supplies
- Easy to pick up, just bend lightly, special surface treatment, make the printed parts better adsorb on the panel..
- Super strong magnet, designed to resist the pulling force of FEP and maintain chemical exposure..
- After printing, just bend the printing plate, and then the parts can be taken out..
- Resilient steel plate, no deformation after repeated bending, has a long service life..
- Handle design, easy to take and install, convenient to use and with good performance..
Check StockLeaf Gulp Lawn Bag Holder For 39 Gallon PLASTIC or 33 Gallon compostable BIO-BAGS Leaf Bags Hands-Free Bagging Just Sweep Yard and Garden Leaves or Debris Made in USA
- Makes yard cleanup fast & easy! HGTV SAYS - "OK, THIS PRODUCT IS PRETTY GENIUS". No more pickup by hand, no more flimsy bags & no more bending! Leaf....
- Sweep piles of leaves and yard debris into your lawn bag in seconds without bending! Then lift the Leaf Gulp and your bag stays attached so you can....
- Fits 39 gallon plastic lawnbags & 33 gallon compostable bio lawnbags. Attach the bag to the Leaf Gulp in seconds, then stab the Gulp in the ground and....
- Leaf Gulp's revolutionary design weighs only 13 ounces and is built to last. It's compact flat design makes it easy to hang on the wall to store. You....
- Stop bending and picking up those leaves by hand! Fill a bag in seconds! Save your time! Get the Gulp!.
Check StockHasbro Marvel Spider-Man Bend and Flex Green Leprechaun Action Figure, 15 cm Bendable Figure, Includes Effect Accessories, for Kids 6 Years and Up
- Bendable! This articulated figure is great for fun. The 6-inch Green Leprechaun Bend and Flex figure has bendable arms and legs that can be put into many different poses.
- Flexible! There are no limits to your imagination when it comes to bringing the Green Goblin into a new action pose. The Bend and Flex figures are more versatile than ever before.
- Choice of poses: powerful poses. Each bendable figure also includes an accessory to make the best poses even more expressive.
- Classic Marvel design: this figure of the green goblin with classic design invites fans to immerse themselves in the action.
- Other Bend and Flex figures can be collected: other Bend and Flex Spider-Man figures can be collected. Additional figures sold separately. Subject to availability.
Check Stock
3 in 1 Tube Bender - Yellow Jacket 60390
- POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
- EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
- ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
- INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
- 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check StockFIFO Squeeze Bottle Refillable 16 oz Blue Tip Blue
- 【 MFi-certification】Mfi certified lightning cable 10 ft. NO frequent pop-ups when connecting, ensures complete fast charge and sync with your....
- 【UPGRADED STAYING POWER】 Upgraded zinc alloy perfectly connects with SR joint design that have passed 12000+ times bending tests for extra....
- 【Reinforced Joint Design】Nylon Braided long iphone charging cord 10 ft with reinforced joint design, cables have been tested to bend 95-degrees....
- 【Compatible With】This iphone charging cord 10ft compatible with iPhone 11/11Pro/11Max / X XS Max XR / 8 / 8 Plus / 7 / 7 Plus / 6s Plus / 6s / 6....
- 【Get】 Lightning Cable iPhone charger 10 foot *2..
Check Stock
Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999
- BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
- POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
- EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
- ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
- TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check StockUNAOIWN 1Pack Gutter downspout Extensions Flexible rain Gutter Down Spout for Outdoor Gutter Splash Block Drain Extender Extendable from 21 to 60 Inches, Green
- PREVENTS WATER DAMAGE – Downspout extensions help divert unwanted stormwater away from your home’s foundation when connected to a downspout..
- FLEXIBLE IN MANY WAYS – Flexible design easily bends and holds its shape while its corrugated design enables you to bury, connect and bend the extension..
- SPECS – Fits both 2 in. x 3 in. and 3 in. x 4 in. downspouts | Extendable from 25 to 45 inches | Vinyl construction for durability.
- Split design: downspout extender uses a split design, the interface is made of abs injection molding, will not tear off and crack, the hose uses high-quality pe material hose, no crease, no hole, will not crack, durable..
Check Stock
TEMCo TH3030 Dual Size Conduit Offset Bender 2 in 1 - both ½“& ¾” EMT
- TH3030 is 2 offset benders in 1 tool. Electrical Box Offsets can be made in both ½” and ¾” EMT with this one tool – NO NEED to buy more than one unit to bend both sizes..
- TH3030 easily makes quick accurate offset bends with one motion of the bender. The quality bend allows for improved connections to the electrical box and reduces time in bending offsets by eliminating the double bend with a hand bender..
- NO TOOLS REQUIRED to change bender from ½” to ¾” – Die change from ½” to ¾” can be made in less than 1 Minute. Dies are configured to assemble so that there is no possibility to mix up sizes..
- Light weight aluminum construction reduces weight to allow ease of use and movement at the job site while maintaining a quality tool producing quality repeatable bends..
- High Quality, Easy to use offset bender for the professional, industrial application or the Do It Yourselfer with TEMCo’s 1 year guaranteed full refund and 5 Year Warranty.
Check Stock
Ring Bender Tool Ring Bending Tool for Jewelry Making Ring Maker Bender Tool with Nylon Dies Ring Making Kit Ring Bending Machine
- Note: ring bending tool must be fixed directly to your workbench by using screws or if you have a fixed bench vice, the ring bender can be placed on top of the vice jaws..
- Although many people use this method to make spoon rings, the ring bender tool is designed for working with soft precious metals, so we recommend this bending tool for soft metals and its thickness must be 3mm or less..
- Most ring making tools bend the material by an external force, so it is unavoidable to leave marks on the material. so we are equipped with nylon dies that will allow you to make bends without marring delicate materials..
- The ring making kit is machined from solid steel and then hardened to 45-50 HRC. each steel post and die are black oxidized, and there is no corrosion for life. the jewelry tools can be bending earrings, rings, and other metal parts.
- suitable for home hand-made, jewelry DIY, jewelry repair, jewelry design, or jewelry stores..
- It is one of the most commonly used jewelry making tools, like other ring bending machines, you can easily get the more accurate size and shape with these r....
Check Stock
Hilmor Compact Bender Kit with Reverse Bending Attachment for 1/4" - 7/8" Tube and Pipe Bending, Black, CBKRB 1926598
- POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
- EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
- ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
- INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
- PRODUCT DIMENSIONS: Length: 16.4", Width: 12.3", Height: 3.3", Weight: 10.8 lbs.
Check StockDanco Universal Touch-Toe Push Button Tub Stopper, Chrome, 2 inch x 2-1/4 inch, 1-Pack (80811) (2)
- Just Push to both open and close without bending over.
- The Grid style design keeps your drain free from unwanted debris and clogs to keep water flowing.
- This very Easy-to-install and requires absolutely no tools.
- TOUCH-TOE PUSH BUTTON design easily pushes to open and pushes to close without having to bend over.
Check StockGardner Bender B1000 Portable Cyclone Conduit Bender
- Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
- Attaches to almost any pipe threader to use as a bending power source.
- Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
- 1 shoe for all sizes – no spare parts to carry around.
Check Stock
