Categories

Best Non Isolated Module

HiLetgo 250W DC-DC Module 10-40V to 10-50V 6A Adjustable Step-Up Power Supply Module 250W DC Booster Constant Voltage Constant Current Power Converter Module

  • Boost Step-up Constant Current Mobile Power Supply.
  • Module properties: non-isolated step-up module (BOOST).
  • Output voltage: 10-50V continuously adjustable.
Check Stock

DC-DC Converter Module Boost DC Step Up Voltage Regulator CV Stabilizer Power Supply Module 10-60V to 12-97V 1500W 30A

  • Stable Output: Boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC..
  • Intelligent Temperature Control: It adopts intelligent temperature-controlled fan design, and automatically works when the temperature reaches 60°C or so. It stops when the temperature is lower than 60°C..
  • High Conversion Efficiency: Step up module is made of high quality components, ensuring high conversion efficiency up to 97%..
  • Long Service Life: Boost converter is a non-isolated DC power converter module with a long service life..
  • Widely Used: It is widely used in high-power solar street lights, various LED lighting CV drives, car and mobile equipment power supplies, DIY adjustable CV power supplies, solar charging, and various battery charging..
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

DC DC Voltage Step Up Converter Boost Power Module 10-60V to 12-97V 1500W 30A CC CV

  • ADJUSTABLE VOLTAGE -- This is a non-isolated DC power converter module with long service life.High power and stable output, it converts 10-60VDC to 12-97VDC..
  • 97% HIGH CONVERSION EFFICIENCY -- High quality components ensures high conversion efficiency, up to 97%..
  • WIDELY APPLICATION -- This Boost Power Module is widely used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
  • DESIGNED WITH SMART TEMPERATURE CONTROL FAN -- Which will automatically work when temperature reaches about 60, and stop when temperature drops below 60..
  • NOTE: When using battery, switching power supply, solar panel, or generator as input power, please it is necessary to decrease the battery protection voltage value. Otherwise it will cause damage to the battery and the power supply..
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

Dorhea 12V to 6V Car Power Voltage Converter DC 9V-22V 12V to DC 6V Buck Voltage 3A 18W Waterproof DC Step Down Volt Module Power Supply Board Compatible with Car Vehicle Automotive LED Display Radio

  • High conversion efficiency of 95%, module properties -- synchronous rectification non-isolated buck module..
  • Car power converter input voltage range is DC 9V-22V, output voltage range is DC 6V, output current is 3A, output power is 18W..
  • Protection --- Over-temp protection, over-current protection, over-voltage protection, input reverse connection protection, output short-circuit....
  • Compatible with car audio, motor, speaker, radio, auto LED display screen, photovoltaic panel, electric fan, solar power monitor, navigator, GPS....
  • Note --- Positive pole and negative pole of input and output cannot be connected reversely..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

ESP8266 Wire~Less Wi~Fi Transceiver Relay Module, 4 Channel DC 5V Smart Switch Relay Module for Smart Home Automation System IOT A~PP Con~Troller

  • SUPPORT TWO WORK MODE: Mode 1: cellphone carry on WIFI module directly. Mode 2: cellphone and WIFI module carry on router together..
  • TRANSMISSION DISTANCE: In the open environment,when mobile phone is carrying on the WIFI module ,maximum transmission distance is 100 meter. When the WIFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal..
  • SAFE: Optocoupler isolated output, safe and reliable..
  • LED INDICATOR: On board relay LED indicator , mode option and working statue LED indicator..
  • SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..
Check Stock

ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino

  • It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
  • Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
  • RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
  • With optical coupling isolation, triggering more reliable, more stable..
  • EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..
Check Stock

V-Show 6 Way Isolated DMX Splitter - 6 Branch Universal Splitter Amplifier Distributor 3Pin Outputs for DMX Signals.

  • √ 6 port Dmx splitter isolated outputs greatly save your setup time and the use of cable, reducing the risk of a plug failure or tripped over wire.Each output module is completely isolated by photoelectric separator, which effectively enhances the isolation and protection ability of the product. And anti-interference ability..
  • √ 3pin male XLR inputs feed through 3pin female output. Each connection location can be connected independently, up to 32 lamps and lanterns.
  • √ Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system..
  • √ Built from high quality materials, this splitter is the ideal blend of functionality, durability and portability..
  • √ This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another..
Check Stock

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

  • Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
  • Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
  • It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
  • PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
  • Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Check Stock

USB to CAN Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS

  • The USB to CAN Converter Module compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop..
  • The USB CAN Module support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel), Ubuntu..
  • Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification..
  • Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature..
  • Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur)..
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock