Categories

Best Non Marring Vise Jaws

Bessey BV-NVJ Multi Purpose Vise Jaw Caps, Yellow

  • Works with most vises with jaws from 3 to 6 inches wide.
  • Designed to avoid marring of already machined surfaces, soft metals and wood.
  • Securely fastens over steel vise jaws with 2 strong magnets.
  • Grooved to assist in holding round stock, tubing etc..
Check Stock

WORKPRO 2-Pair Vise Jaw Pads, Magnetic Vice Jaw Covers Protectors, 5-1/2 inch Multi-Groove Jaw Pads and 6 inch Aluminum Pads Set

  • Two Pack: The set includes 6 inches soft standard pads and 5-1/2 inch multi-groove jaw pads, works with most Bench Vises, Clamps, Drill Press, Millers, and more.
  • Non-Marring: Aluminum Vise Jaws with drawer type soft pads are designed to protect hard workpieces, and the tough multi-groove pads perform well in protecting soft workpieces.
  • Skid-proof Surface: The drawer pads have a waffle surface to hold round or hex parts and support flat parts well, the mutli-groove provides 5 round grooves and 90° & 45° clamping angles.
  • Strong Magnets: Embedded magnets on the pads attract them to the vise tightly, keep vise pads securely in place and hold the work-piece better.
  • Multi-Purpose: These vice jaw pad sets can be used on many types of vices and help protect surfaces of wood, metal, plastic, tubing or any other workpieces using on a vice.
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

Z-COLOR Mini Flat Clamp Table Jaw Bench Clamp Mini Drill Press Vice Opening Parallel Table Vise DIY Sculpture Craft Carving Tool

  • Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly.
  • Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work..
  • Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects..
  • 4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your tabl....
Check Stock

Riverruns II Generation Rotary Fly Tying Vise Jaw Balanced Truly Extendable Right&Left Hand Fitting

  • Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at....
  • Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both....
  • The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close. They are....
  • The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

FRICTIONWORKS Made in USA 4' Professional Grade Soft Jaw Pads/ Covers for Bench Vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

  • MADE IN USA - The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, moving, or falling off the vise.
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets - 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise.
  • UNIQUE MAGNET RETENTION SYSTEM - Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws.
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU. For high-torque applications see or SH80 jaws..
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  • PROTECTIVE SURFACE – Specially textured surface won't mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.
  • TIGHT TOLERANCES - true flat surfaces, angles, and dimensions reduces wobble and improves fi....
Check Stock

Nuovoware Table Vise 3 Inch, 360° Swivel Base Universal Home Vise Portable Bench Clamp, Clamp-on Vise Bench Clamps Fixed Tool for Woodworking, Metalworking, Cutting Conduit, Drilling, Sawing, Black

  • ADAPTS TO ANY TASK: Third hand vise rotates and swivels to the angle you need.
  • VERSATILE: 2-in-1 design includes 1-1/2" and 2-1/2" vises.
  • PORTABLE: Clamps on to sturdy work surface up to 1-1/2 inches thick, and can be permanently mounted too - hardware included.
  • PROTECTS DELICATE SURFACES: Includes non-marring nylon soft jaws for delicate work.
  • COMPACT DESIGN: Ideal for hobby and light duty use.
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Hoppes Gun Vice w/Dry Kit HGVH

  • DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch.
  • EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included).
  • VERSATILE: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps.
  • NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction.
  • DURABLE: Features a steel tube frame structure.
Check Stock