Categories

Best Non center Cutting

Alumicolor AlumiCrafter Straight Edge Metal Ruler with Unique Deckle Edge, Blue, 12 Inch

  • 12" LENGTH - Standard 12" AlumiCrafter comes with a raised cutting edge and finger groove for protecting your fingers while cutting.
  • UNIQUE DESIGN - AlumiCrafter's unique deckle edge with center-finding calibrations makes a beautiful natural-looking border.
  • BLUE STRAIGHT EDGE RULER AND MEASURING TOOL - Our superior-quality silver extruded aluminum is imprinted using photo anodizing process that makes for a uniform finish and color, through this process calibrations become a permanent part of the aluminum and will not wear off over time.
  • DURABLE CONSTRUCTION WITH NON-SLIP BACK - Quality construction uses a recessed non-slip neoprene backing that keeps the AlumiCrafter in place with just a light touch.
  • ALUMICOLOR IS QUALITY - Each AlumiCrafter is made with the highest quality extruded aluminum and features photo adonized calibrations that won't rub off over time.
Check Stock

Alumicolor AlumiCrafter Straight Edge Metal Ruler with Unique Deckle Edge, Red, 12 Inch

  • 12" LENGTH - Standard 12" AlumiCrafter comes with a raised cutting edge and finger groove for protecting your fingers while cutting.
  • UNIQUE DESIGN - AlumiCrafter's unique deckle edge with center-finding calibrations makes a beautiful natural-looking border.
  • RED STRAIGHT EDGE RULER AND MEASURING TOOL - Our superior-quality silver extruded aluminum is imprinted using photo anodizing process that makes for a uniform finish and color, through this process calibrations become a permanent part of the aluminum and will not wear off over time.
  • DURABLE CONSTRUCTION WITH NON-SLIP BACK - Quality construction uses a recessed non-slip neoprene backing that keeps the AlumiCrafter in place with just a light touch.
  • ALUMICOLOR IS QUALITY - Each AlumiCrafter is made with the highest quality extruded aluminum and features photo adonized calibrations that won't rub off over time.
Check Stock

Soft Rubber Feet for Cutting Board with Stainless Screws, Cutting Board Feet Non Slip Rubber Feet for Electronics, Small Rubber Bumpers for Furniture, Made in USA, 0.67" W x 0.25" H (12 Pack)

  • Cut with confidence: Stabilize your cutting boards with our non slip rubber cutting board feet! Each set includes 12 rubber bumper pads paired with 12 stainless steel screws and steel inserts..
  • Made in USA: Our rubber feet bumpers are made from BPA Free rubber. Whether you use them as butcher block feet or charcuterie board feet, our rubber appliance feet are a great addition to any kitchen..
  • Protect your kitchen countertops: Wood feet for cutting board leave scratches and adhesive rubber feet fall off! Our screw on rubber feet for cutting boards keep your boards secured and stabilized..
  • Protect your hardwood floors: Install our non skid rubber feet for furniture legs on stools, screw on chair feet, or even add them under nightstand cabinet feet and start enjoying scratch-free floors!.
  • Small soft rubber furniture feet: Our rubber pads for cutting board measure 0.67" wide, 0.25" tall, 0.12" center hole (fits #6 screws). Available in black, clear, and white rubber feet..
Check Stock

Qjaiune 51mm/2\ Hole Saw BI-Metal Heavy Duty Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • Package Include: 1 x 2" hole saw, 1 x hole saw arbor, 2 x extra center bits, 1 x Allen wrench (Includes everything you need to do it yourself).
  • High Performance Matieral: The 2in hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.
  • Proessional Cutting: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • Appliaction: Hole Saw Drill Bit is designed for wood / plastic cutting, smooth and fast cutting the holes through wood, drywall, plaster, cutting a smooth and clean circle for your project such as corn hole boards, recessed lights, speakers, air ducts, etc..
  • Purchase Guarantee: Please rest assured to buy our products. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days..
Check Stock

MAXPOWER Bolt Cutter 30 inch, Max Jaw Opening 13/16\

  • Heavy duty bolt cutters 30 inch, Max Jaw Capacity 13/16 inch ( 20 mm ), Cutting capacity 3/8" ( 10mm ) for hardened steel stick.
  • Center cut bolt cutters feature blades that are beveled on both sides and are equidistant from each other. Suit for cutting through cables, pipes, padlock, and metal rods.
  • Precise blade alignment, built-in adjustment bolt provides greater power with less effort.
  • Drop forged Cr-Mo blades and Heat-treated, and Drop forged joint arms.
  • Non-slip Rubber handle for maximize comfort and control.
  • MAXPOWER 30 inch Bolt cutter, Overall length 30 inch(760mm), Working length 24 inch (600mm), weight 7.94lb.
Check Stock

Qjaiune 108mm/4.25\ Hole Saw BI-Metal Heavy Duty Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • Package Include: 1 x 4.25" hole saw, 1 x hole saw arbor, 2 x extra center bits, 1 x Allen wrench (Includes everything you need to do it yourself).
  • High Performance Matieral: The 4.25in hole saw is made of HSS carbon steel & Bi-metal steel, with hardness up to 65HRC, which has superior performance and higher cutting strength than others hole saws.
  • Proessional Cutting: With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
  • Appliaction: Hole Saw Drill Bit is designed for wood / plastic cutting, smooth and fast cutting the holes through wood, drywall, plaster, cutting a smooth and clean circle for your project such as corn hole boards, recessed lights, speakers, air ducts, etc..
  • Purchase Guarantee: Please rest assured to buy our products. If you are not satisfied with the product, we provide a 100% money back guarantee within 90 days..
Check Stock

Step Drill Bit Set & Automatic Center Punch, 50 Sizes in 5 High Speed Steel Titanium Coated Double Sided Drill with Aluminum Case, for DIY Lovers

  • ...iction, make the operation cooler, improve the sharpness of the drill bit, wear and corrosion resistance, and maintain good gloss even after long-term use. The laser marking is clear, and the diameter is clear at a glance.
  • ⭐【Unique Design】- Double-edged and X-shaped opening design to ensure faster and smoother cutting.
  • double spiral grooves reduce cutting resistance and chip removal more smoothly.
  • triangular shank design can prevent the drill from slipping, suitable for a variety of models.
  • ⭐【Automatic Center Punch】- It can realize automatic and high impact force by spring loading, the knurled surface of the brass body can be non-slip. The cemented carbide drill bit makes the center punch ten times stronger than the ordinary drill bit.
Check Stock

Keadic Glass Cutting Tool Set Contains Glass Running Pliers, 2mm-20mm Oil Feed Carbide Tip with 3 Bonus Blades, Calibrated Portable Circular Glass Cutter for Mirrors Windows Mosaic Stained Glass

  • 【What You Get】The glass cutting tool contains 1 pcs heavy duty glass breaking pliers, 1 pcs pen style oil feed carbide tip with 3 pcs replaceable blades (2-6mm,6-12mm, 12-20mm), 1 pcs screwdriver for replacing the blades, 1 pcs clear plastic oil dripper for add oil into the glass cutting tips lubricating the wheel, 1 pcs circular glass cutter and 2 pcs pens, totally 8pcs. A professional glass kit covers all tools needed to cut glass..
  • 【High-value Pencil Style Oil Feed Glass Cutting Set 】 The pen style oil feed cutter tip is designed with a black non slip embossed handle, the ball shape end can be taken off and add oil into the cutter from the entrance. Ultra-strong diamond carbide blade with solid hardness and sharp cutting to guarantee smooth operation. Suitable for 2-6/6-12/12-20mm thick glass cutting..
  • 【Premium Glass Running Pliers with Rubber Tips】 Made of heavy duty carbon steel for rust-resistance, PVC rubber handle is ergonomic and soft, which allows you to grip comfortably. Adjustable set screw design for controlling the amount of pressure applied, easy to adjust for different thicknesses of glass. Equipped with silicone cover, it can quickly break glass/tiles without causing scratches on the glass surface..
Check Stock

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

Barnel BR7000 Deep Hook Telescoping Ratchet Lopper

  • Efficient ratchet action for easy cutting.
  • Telescoping handles for total length 27.5" to 39.3".
Check Stock

HENCKELS Heavy Duty Kitchen Shears that Come Apart, Dishwasher Safe, Black, Stainless Steel, Blue 10.25-inch

  • QUALITY MANUFACTURING: High quality corrosion resistant stainless steel.
  • CUT WITH EASE: Micro serrated blade edge for slip proof cutting.
  • BREAK-PROOF HANDLES: Heavy duty break resistant handles.
  • CORROSION RESISTANT: Quality stainless steel blades for corrosion resistance and long cutting life.
  • MULTI-PURPOSE: Serrated center area in handle can open bottles, crack nuts.
  • EASY CLEAN UP: Dishwasher safe, hand washing recommended.
  • Quality stainless steel blades for corrosion resistance and long cutting life.
  • Micro serrated blade for slip proof cutting.
  • Serrated center area in handle can open bottles, crack nuts.
  • Take-apart functionality for easy cleaning.
Check Stock

Benchmark Fluids Sawlution II 5 gals Synthetic Grinding and Sawing Coolant 5 gal Carboy

  • Concentrated synthetic cutting and grinding fluid with 2.0 Refractive Index.
  • Suitable for ferrous and non-ferrous metals.
  • Used in Band Saws, mills, lathe and machining centers.
Check Stock

MAX-CRAFT HSS Cobalt Drill Bit Double End 30# (0.1285') Stubby Body Drill Steel Metal Iron-10Pcs

  • ✔️DOUBLE END DRILL BIT SIZE:  30#(0.1285")Diameter) x 5/8"( Flute Length) x 2" (Overall Length).
  • ✔️MATERIAL: HSS Cobalt Material is the best hardened material for drilling longest life.
  • ✔️DOUBLE END CUTTING POINT :The 2 cutting point of one single drill bit, when one cutting point is used bored and the other cutting end can be used, as another new drill bit..
  • ✔️SPLIT POINT 135 DEG. ANGLE: No center punch is needed-- the aggrevsive 135 Deg. Split Point quick-cut points are self-centering and penetrate quickly with less pressure..
  • ✔️APPLICATION: Drill through stainless steel, general steetl, metal sheet, iron, copper, aluminum, plastic….
Check Stock