25pcs T118B 75mm Long HCS 6 TPI T Shank Metal Cutting Jigsaw Blades Power Tool Accessories for 3-6 mm Thin Metals Sheet Metal Fine Cut
- Ideal for cutting sheet metal and thin metals (ferrous and non-ferrous). For thin to medium metals 2/8" to 1/4" (3-6 mm)..
- 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in thin metals..
- These jigsaw blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast....
- Made of high carbon steel construction, sturdy and durable, wear resistance and can be use for a long time..
- Package includes 25 pieces of universal Jigsaw saw blade accessory kit..
Check StockTTC #0-#5 6 Pc Straight Flute Straight Shank Taper Pin Reamer Set
- For resizing of drilled and bored holes to suit standard tapered pins..
- Use in a variety of normal ferrous, non-ferrous and non-metallic materials..
Check StockPrimoChill Liquid Utopia - 15ml Bottle
- Offers full line protection against algae and corrosion. Protects ferrous and non-ferrous metals from corrosion..
- Can be used in new install(recommended) or existing loops..
- Bottle Size: 15ml. Dosage: Mix with 1 Gallon of DI or distilled water.
Check StockArmor Protective Packaging MR5GAL Metal Rescue, 5 gal
- Water Based Rust Remover, Ferrous Metals for Removal of Oxidation and Brightening of Some Non-Ferrous Metals, Bath, Soak Applications.
- No Acids, No Caustics, No Health Risks, Non Toxic, Safe on Skin.
Check StockZircon MetalliScanner MT6 Professional Metal Detector
- Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
- Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
- Shows the depth of metal from the surface in both inches and centimeters.
- Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
- Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.
Check StockTRIM Cutting & Grinding Fluids 9106/1 Synthetic Coolant, 1 gal Jug
- RotaMagic Super Concentrated Cutting Fluid is water soluble, biodegradable cutting lubricant that yields a 10:1 ratio when mixed with water.
- RotaMagic extends tool life and improves cutter performance, Use with ferrous or non-ferrous materials.
- Will improve surface finish and reduce heat build up when drilling.
Check StockZircon 66226 1.5-in Scan Depth PP3 (9V) Metal and Wood Stud Finder
- Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep.
- Quickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces.
- Works as a great stud finder for plaster walls, as well as finding rebar in concrete.
- Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings.
Check StockKool Mist 100N-205 1 Gallon Single Mist Unit w/Stainless Steel Tank
- Use for tapping, threading, drilling and reaming.
- Use on ferrous metals and non-ferrous alloys.
- Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check StockRockwell RW8966 Sonicrafter Oscillating Multitool Extended Life Bimetal Wood & Nail End Cut Blade, 1-3/16'
- Use to make plunge cuts up to 1-5/8-inch deep.
- Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
- Hardened teeth will cut non-ferrous metals.
- Universal fit system adapts to other brands.
Check StockMakita B-65399 Impact Gold 14 Pc Titanium Drill Bit Set 1/4 In Hex Shank
- Titanium nitride (TiN) coating lasts 2.5x longer than non-coated bits.
- 135 degree split point geometry for faster starts and reduced walking.
- Impact rated: For use in 1/4 inches Hex impact drivers.
- For drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Check StockRockwell RW8966.3 Sonicrafter Oscillating Multitool Extended Life Wood & Nail End Cut Blade (3-Pack), 1-3/16'
- Use to make plunge cuts up to 1-5/8-inch deep.
- Make detail cuts to wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal, and Hardened fillers.
- Hardened teeth will cut non-ferrous metals.
- Universal fit system adapts to other brands.
Check StockSimple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods
- Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
- Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
- Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
- No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
- Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check StockSimple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods
- Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
- Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
- Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
- No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
- Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock