Categories

Best Non ferrous Products

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Industrial Test Systems 481146 Sensafe Iron (Ida's) Water Test Strips 30 Pack

  • ✔EASY TO USE: Single dip and read test strip procedure and optimized color chart make the product ideal for technical and non technical users alike for detection of ferrous Iron (Fe+2) in water.
  • ✔DETECTION LEVELS: Iron, Ferrous (Fe+2)*: Method A: 0. 0, 0. 3, 1. 0, 2. 0, 5. 0, 10, 20, 50 ppm (mg/L)--- Iron, Ferrous (Fe+2)*: Method B: 0, 0. 005, 0. 01, 0. 03, 0. 06, 0. 10, 0. 30 ppm (mg/L)--- *Does not detect Ferric Iron (Fe+3).
  • ✔COMPLETE KIT: Pack of 30 individually wrapped test strips packed Pocket Pouch with color chart.
  • ✔ACCURATE AND RELIABLE: Components are tested by Quality Control personnel at each step and are rejected if they are outside of specifications. Standards are prepared using calibrated equipment, and concentrations are confirmed by recognized reference methods.
  • ✔ HIGHEST QUALITY: ITS, manufactures test strip products in their USA facility in an environment that allows for reproducibility, accuracy, and traceability based on Good Manufacturing Practices..
Check Stock

65PCS U-Shank Jig Saw Blades Set for Wood Plastic Metal Cutting Compatible with DEWALT SKIL Black and Decker Jigsaw Blades U Shank 6T 8T 10T 14T 18T 24T 32T with Blister Packs

  • SUPERIOR VALUE JIGSAWS BLADE -- Why pay $1-$3 per blade? Our saw blades match & exceed name-brand quality at a fraction of the price. 65 Piece Contractor U-Shank Jigsaw Blades Set. Meet your everyday needs..
  • PROFESSIN BLADES SET -- Metal cutting: 5pcs x 14TPI medium cut.
  • Non ferrous metals: 5pcs x 18TPI medium cut.
  • Non ferrous metals: 5pcs x 24TPI fine cut.
  • Non ferrous metals: 5pcs x 32TPI extra fine cut.
  • Wood and plastic cutting: 15pcs x 6TPI fast cut.
  • MORE POWER -- Three contact points are designed on the U-Shank of the saw blade for maximum grip and stability. Make woodworking faster and safer..
  • COZZMTS BLADES COMPATIBILITY -- Compatible with over 90 percent of current jigsaws including DEWALT , BLACK+DECKER , CRAFTSMAN , SKIL , and Milwaukee U Shank jig saws, the jigsaw blades is a versatile addition to any toolset..
  • PRODUCT WARRANTY -- Factory direct price! Standardization ISO 9001 and ISO 140001. 30-day free return service, please rest assured purchase products. Brand: COZZMTS..
Check Stock

7-1/4 X 70 FERROUS ULTRAFINE

  • For 7-1/4-Inch Circular Saws. 1/8-Inch or less Thin Steel thickness Ultrafine cut, 5600+ RPM, Very Thin Steel 18 ga or thinner, 5/8-Inch arbor..
  • Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for metal cutting applications..
  • Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life.
Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

  • Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Flame Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SH-5

  • Benchmark Abrasives SH-5 flame shape burrs are great for interior contour work and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Oval/Egg Shape Premium Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SE-5

  • Benchmark Abrasives SE-5 oval/egg shape burrs are great for contouring and rounded edge processing. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Inverted Cone Shape Double Cut Rotary Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SN-4

  • Benchmark Abrasives SN-4 inverted cone burrs are great for rear-side chamfering, edge milling, and machining on hard-to-reach areas. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-3

  • Benchmark Abrasives SM-3 cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives Pointed Cone Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding Deburring Sculpting High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SM-5

  • Benchmark Abrasives SM-5 pointed cone burrs are great for narrow contours, surface machining, and getting at rounded edge and surface processing in small places. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs are used on ferrous and non-ferrous metals, soft steel, and non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

12 sticks BLUEFIRE 1/2 lb Low Temperature Aluminum Zinc Alloy Brazing Rods All-Purpose Easy Melt Welding Rod for Soldering Aluminum Copper Stainless Steel Iron Metals Simple DIY Solution

  • Superior Performance - Works at much lower temperatures (728 °F/387°C) than most comparable brazing alloy products, allowing you to repair and fabricate more aluminum and other non-ferrous parts..
  • Perfect Welding Results: strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent machinability..
  • Scope of Application:Works with aluminum, aluminum alloy, steel and iron, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals. Allowing you to apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane torch like the best metalwork enthusiasts do..
  • WARRANTY -- If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

Benchmark Abrasives 4-1/2" x 7/8" Premium High-Density Jumbo Zirconia Type 29 Flap Discs for Sanding, Stock and Rust Removal, Finishing, Grinding, Deburring (50 Pack) - 60 Grit

  • Benchmark Abrasives 4.5" flap discs are ideal for surface blending, beveling, grinding, deburring, edge chamfering, finishing, stock removal, etc. on a variety of ferrous and non-ferrous materials..
  • Zirconia Flap Discs are manufactured using European zirconia cloth. The European material is superior due to its uniform particle size and premium blend of ingredients..
  • Designed to meet industrial standards, our high-quality flap discs are recommended to be used with angle grinders sized 4.5" to 5”. These Type 29 flap discs are versatile products that can be used for aggressive stock removal to surface blending..
  • Efficient flap discs are used in various industries like automotive, transportation, mining, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

25pcs T118B 75mm Long HCS 6 TPI T Shank Metal Cutting Jigsaw Blades Power Tool Accessories for 3-6 mm Thin Metals Sheet Metal Fine Cut

  • Ideal for cutting sheet metal and thin metals (ferrous and non-ferrous). For thin to medium metals 2/8" to 1/4" (3-6 mm)..
  • 6 TPI tooth profile and high carbon steel blade body for exceptionally fast cutting and long life in thin metals..
  • These jigsaw blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast....
  • Made of high carbon steel construction, sturdy and durable, wear resistance and can be use for a long time..
  • Package includes 25 pieces of universal Jigsaw saw blade accessory kit..
Check Stock