Good Ideas Rain Wizard 50 Gallon Plastic Outdoor Home Rain Barrel Water Storage Collector with Brass Spigot and Flat Back Design, Black
- FUNCTIONALITY: Catch and store rainwater in this 50 Gallon faux wood rain barrel.
- OVERFLOW SPOUT: Includes brass spigot so you can easily connect your hose or for use as an overflow spout.
- QUALITY: Made of the industry's strongest polyethylene resin, It won't rot like wooden barrels, and stands up to the cold without cracking or splitting.
- EFFICIENCY: Collecting rainwater can help lower water bills and is easy on the environment.
- DESIGN: Flat-back and front-side overflow design lets the barrel rest up against your house, but without the worries of water washing over your wall.
Check StockSimplyCopper 15 Round Vintage Look Copper Bucket Vessel Sink with GREEN Patina with Drain and 13 ORB Claymore Vessel Filler Faucet
- Sink: Outside Dimensions: 15" X 6"D Inside Dimensions: 15" x 6"D Edge (Lip): Wire Rimmed.
- Gauge: 18 Material: Copper Finish: Aged Copper WITH Exterior Green Patina.
- Drain Opening: 1-1/2" { Non-Overflow } Daisy Drain Included (Will not Hold Water).
- Faucet: Height: 13" Spout Reach: 7" Spout Height: 11".
- 360 Degree Rotation Feature: Thermostatic Faucets Hoses: Hot and Cold Installation Type: Deck Mounted Number of Handles: Single Handle.
Check StockVANCE Trimmable Under Sink Tray for 36 in Base Cabinet | Protects Cabinets from Leaks and Spills | Adjustable Spill Guard for Kitchen and Bathroom Sinks
- ✔️ DURABLE - Made from easy-to-clean polystyrene..
- ✔️ REMOVABLE - For easy access and cleaning..
- ✔️ OVERFLOW SPOUT - Includes overflow spout to warn of leaks..
- ✔️ TRIMMABLE - Tray can be trimmed down to 33.25" x 22.25"..
Check StockVance Trimmable Under Sink Tray for 33 in Base Cabinet | Protects Cabinets from Leaks and Spills | Adjustable Spill Guard for Kitchen and Bathroom Sinks
- ✔️ DURABLE - Made from easy-to-clean polystyrene..
- ✔️ REMOVABLE - For easy access and cleaning..
- ✔️ OVERFLOW SPOUT - Includes overflow spout to warn of leaks..
- ✔️ TRIMMABLE - 33" tray can be trimmed down to 30.25" x 22.25"..
Check StockScepter 07081 Fuel Can - 1.25 Gallon
- Includes child resistant spout with automatic shut-off and overflow protection.
- Internal venting so fumes do not escape into the air.
- Plastic contains additive to combat permeation of fumes through can walls.
- Lightweight, dent resistant, rust proof, non-corroding polyethylene.
- Meets or exceeds US, Canadian, Australian and New Zealand standards.
Check StockCM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package
- ... Please measure your oil tank mouth size before purchasing..
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
- Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
- Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads,2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent caps . During the installation and use p....
Check StockScepter ECO Jerry Can with Child Resistant Closures (5-Gallon, Gas)
- Includes child resistant spout with automatic shut-off and overflow protection.
- Internal venting so fumes do not escape into the air.
- Plastic contains additive to combat permeation of fumes through can walls.
- lightweight, dent resistant, rust proof, non-corroding polyethylene.
- Meets or exceeds US, Canadian, Australian and New Zealand standards.
Check StockEagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow
- ... Please measure your oil tank mouth size before purchasing..
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
- Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
- Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need ....
Check StockGas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
- ...ead cap to ensure that the cap can be completely sealed..
- High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
- Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
- Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
- Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need as....
Check StockGas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3
- ...height to ensures that the cap can be completely sealed..
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
- Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads,2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use proce....
Check StockBokaiya Small Wall Mount Corner Bathroom Sink and Faucet Combo with Overflow Triangle White Porcelain Ceramic Wall Mount Mini Vanity Space Bathroom sink Faucet and Drain Combo
- SIMPLE MODERN STYLE: Wall mount bathroom sink creates an elegant focal point that enhances any bathroom decor no matter stone or wood furniture.This small vessel sink with overflow is perfect for a small bathroom, it created so much space. And it can be mounted on a countertop or on a wall..
- PREMIUM MATERIAL: The corner sink is made of top one premium quality ceramic which has been through high-temperature treatment.It is not easy to crack and low water absorption,acid resistance..
- EASY TO CLEAN: Smooth container sink has a smooth, non-porous surface. Prevents from discoloration and fading. The glaze with baking adds durability and high gloss. You only need to wipe the surface of the sink with a damp cloth to keep it beautiful..
- SOLID FAUCET AND POP UP DRAIN: Solid brass chrome faucet resist corrosion and tarnishing through everyday use. Drip-Free operation ceramic disc valves ensure high quality and long durability. Faucet includes water hoses of 23.6 inch with 3/8" female compression connector, U.S. standard size. Stainless steel pop up drain with overflow ensures anti-corrosion and durability.
- DIMENSIONS: Sink : 5" High x 18" Wide x 13" Along Wall. Faucet: Overall height:6.6".
- Spout Reach:4.7". Pop-up Drain: Fits sink drain diameter....
Check StockHANEBATH Single Hole Bathroom Faucet Brushed Nickel Single Handle Bathroom Sink Faucet with Pop Up Drain and 2 Supply Lines
- Premium Material: The single handle bathroom faucet is made of 304 stainless steel, lead-free, non-toxic, anti-corrosion and durable, with brushed....
- Easy to Use: The brushed nickel bathroom faucet uses a high-quality and durable valve cartridge, and one lever handle can also effectively control the....
- Pop-up Drain Assembly: The push drain is also 304 stainless steel constrcuted, comes with a detachable strainer basket, that not only can prevent....
- High Applicability: US plumbing standards, the basin faucet spout reach is 5.1-Inch, spout height is 2.55-Inch. 1-Hole mount, the hole size is 1.25 to....
- Package Included: 1x brushed nickel sink faucet, 1x pop up drain with overflow, 2x hot and cold supply lines and installation manual..
Check StockGas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
- ...height to ensures that the cap can be completely sealed..
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
- Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
- Simple to install, Each set of products includes, 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread) 1 yellow Spouts and rubber gaskets, 1 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need....
Check Stock